Home / Articles / Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgenii Georgievich Gordeev 1
Evgenii Georgievich Gordeev
, 
1 N.D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences
10.1070/RCR4980
Published 30 November 2019
Review , RCR4980, Volume 89, Issue 12, 1507-1561
42
Share
Cite this
GOST
 | 
Cite this
GOST
Copy cite
Gordeev E. G., Ananikov V. P. Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects // Russian Chemical Reviews. 2019. Vol. 89. No. 12. pp. 1507-1561.
GOST all authors (up to 50)
Copy cite
Gordeev E. G., Ananikov V. P. Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects // Russian Chemical Reviews. 2019. Vol. 89. No. 12. pp. 1507-1561.
RIS
 | 
Cite this
RIS
Copy cite
TY - JOUR
DO - 10.1070/RCR4980
UR - https://rcr.colab.ws/publications/10.1070/RCR4980
TI - Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects
T2 - Russian Chemical Reviews
AU - Gordeev, Evgenii Georgievich
AU - Ananikov, Valentin Pavlovich
PY - 2019
DA - 2019/11/30
PB - ANO Editorial Board of the journal Uspekhi Khimii
SP - 1507-1561
IS - 12
VL - 89
ER -
BibTex
 | 
Cite this
BibTex (up to 50 authors)
Copy cite
@article{2019_Gordeev,
author = {Evgenii Georgievich Gordeev and Valentin Pavlovich Ananikov},
title = {Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects},
journal = {Russian Chemical Reviews},
year = {2019},
volume = {89},
publisher = {ANO Editorial Board of the journal Uspekhi Khimii},
month = {Nov},
url = {https://rcr.colab.ws/publications/10.1070/RCR4980},
number = {12},
pages = {1507--1561},
doi = {10.1070/RCR4980}
}
MLA
Cite this
MLA
Copy cite
Gordeev, Evgenii Georgievich, and Valentin Pavlovich Ananikov. “Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects.” Russian Chemical Reviews, vol. 89, no. 12, Nov. 2019, pp. 1507-1561. https://rcr.colab.ws/publications/10.1070/RCR4980.
Views / Visits / Downloads
23 / 22 / 4

Keywords

3D printing
additive technologies
chemical reactors
digital manufacturing
FDM method
organic synthesis
polymer materials
stereolithography

Abstract

Representative examples of the application of 3D printing in organic synthesis, biochemistry, biotechnology, analytical chemistry, pharmaceutics and chemical education are considered. It is shown that additive technologies open up new prospects for the development of these fields of science. The characteristics of widely used 3D printing methods (fused deposition modelling and stereolithography) are discussed in the context of chemical applications. It is noted that the key feature of these methods is the wide accessibility of technologies and materials.

The bibliography includes 498 references.

References

3.
rcr_89_12_1507bib3
Tullo
C&EN , 2017
4.
rcr_89_12_1507bib4
Diegel
2019
6.
rcr_89_12_1507bib6
Gebhardt
2016
7.
rcr_89_12_1507bib7
Dilberoglu
Proc. Manuf. , 2017
8.
rcr_89_12_1507bib8
Ciabara
IOP Conf. Ser.: Mater. Sci. Eng. , 2018
9.
A review of the design methods of complex topology structures for 3D printing
Feng J., Fu J., Lin Z., Shang C., Li B.
Visual Computing for Industry Biomedicine and Art , 2018
10.
3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography
Palaganas N.B., Mangadlao J.D., de Leon A.C., Palaganas J.O., Pangilinan K.D., Lee Y.J., Advincula R.C.
ACS applied materials & interfaces , 2017
11.
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo T.D., Kashani A., Imbalzano G., Nguyen K.T., Hui D.
Composites Part B: Engineering , 2018
12.
Improvements in Resolution of Additive Manufacturing: Advances in Two-Photon Polymerization and Direct-Writing Electrospinning Techniques
Bourdon L., Maurin J., Gritsch K., Brioude A., Salles V.
ACS Biomaterials Science and Engineering , 2018
13.
Radiopaque Resists for Two-Photon Lithography To Enable Submicron 3D Imaging of Polymer Parts via X-ray Computed Tomography
Saha S.K., Oakdale J.S., Cuadra J.A., Divin C., Ye J., Forien J., Bayu Aji L.B., Biener J., Smith W.L.
ACS applied materials & interfaces , 2017
15.
3D printing for chemical, pharmaceutical and biological applications
Capel A.J., Rimington R.P., Lewis M.P., Christie S.D.
Nature Reviews Chemistry , 2018
16.
rcr_89_12_1507bib16
2015
17.
rcr_89_12_1507bib17
2017
18.
rcr_89_12_1507bib18
19.
Additive Manufacturing of Ceramic‐Based Materials
Travitzky N., Bonet A., Dermeik B., Fey T., Filbert-Demut I., Schlier L., Schlordt T., Greil P.
Advanced Engineering Materials , 2014
21.
Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast Molds
Snelling D., Li Q., Meisel N., Williams C.B., Batra R.C., Druschitz A.P.
Advanced Engineering Materials , 2015
22.
Evaluation by medical students of the educational value of multi-material and multi-colored three-dimensional printed models of the upper limb for anatomical education
Mogali S.R., Yeong W.Y., Tan H.K., Tan G.J., Abrahams P.H., Zary N., Low-Beer N., Ferenczi M.A.
Anatomical Sciences Education , 2017
23.
rcr_89_12_1507bib23
25.
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori A., Aversa A., Marchese G., Biamino S., Lombardi M., Fino P.
Applied Sciences (Switzerland) , 2019
26.
Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
Tepylo N., Huang X., Patnaik P.C.
Advanced Engineering Materials , 2019
28.
rcr_89_12_1507bib28
29.
Fused glass deposition modelling for applications in the built environment
Seel M., Akerboom R., Knaack U., Oechsner M., Hof P., Schneider J.
Materialwissenschaft und Werkstofftechnik , 2018
30.
Additive Manufacturing of Optically Transparent Glass
Klein J., Stern M., Franchin G., Kayser M., Inamura C., Dave S., Weaver J.C., Houk P., Colombo P., Yang M., Oxman N.
3D Printing and Additive Manufacturing , 2016
31.
Three-dimensional printing of multicomponent glasses using phase-separating resins
Moore D.G., Barbera L., Masania K., Studart A.R.
Nature Materials , 2019
34.
Additive manufacturing of fire‐retardant ethylene‐vinyl acetate
Geoffroy L., Samyn F., Jimenez M., Bourbigot S.
Polymers for Advanced Technologies , 2019
35.
rcr_89_12_1507bib35
Kerekes
Addit. Manuf. , 2019
36.
3-D printer settings effects on the thermal conductivity of acrylonitrile butadiene styrene (ABS)
Sonsalla T., Moore A.L., Meng W.J., Radadia A.D., Weiss L.
Polymer Testing , 2018
37.
rcr_89_12_1507bib37
Peng
Adv. Mater. , 2018
39.
rcr_89_12_1507bib39
Farahani
Adv. Eng. Mater. , 2018
41.
rcr_89_12_1507bib41
van de Werken
Addit. Manuf. , 2020
42.
rcr_89_12_1507bib42
43.
Polyjet technology applications for rapid tooling
Udroiu R., Braga I.C.
MATEC Web of Conferences , 2017
44.
3D Systems' Technology Overview and New Applications in Manufacturing, Engineering, Science, and Education
Snyder T.J., Andrews M., Weislogel M., Moeck P., Stone-Sundberg J., Birkes D., Hoffert M.P., Lindeman A., Morrill J., Fercak O., Friedman S., Gunderson J., Ha A., McCollister J., Chen Y., et. al.
3D Printing and Additive Manufacturing , 2016
45.
rcr_89_12_1507bib45
46.
rcr_89_12_1507bib46
Simonelli
Addit. Manuf. , 2019
47.
Additive manufacturing of multi-material structures
Bandyopadhyay A., Heer B.
Materials Science and Engineering: R: Reports , 2018
48.
rcr_89_12_1507bib48
Loh
Addit. Manuf. , 2018
49.
rcr_89_12_1507bib49
50.
Progress in selective laser sintering using metallic powders: a review
Singh S., Sharma V.S., Sachdeva A.
Materials Science and Technology , 2016
53.
Direct selective laser sintering and melting of ceramics: a review
Sing S.L., Yeong W.Y., Wiria F.E., Tay B.Y., Zhao Z., Zhao L., Tian Z., Yang S.
Rapid Prototyping Journal , 2017
54.
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca A., Colombo P., Gomes C.M., Günster J.
Journal of the American Ceramic Society , 2015
55.
rcr_89_12_1507bib55
Brandt
2017
56.
“Laser Sintering of Unimodal Distributed Glass Powders of Different Size”
Sofia D., Granese M., Barletta D., Poletto M.
Procedia Engineering , 2015
57.
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth J.-., Levy G., Klocke F., Childs T.H.
CIRP Annals - Manufacturing Technology , 2007
59.
Multi-material selective laser melting of Fe/Al-12Si components
Demir A.G., Previtali B.
Manufacturing Letters , 2017
60.
Direct metal fabrication in rapid prototyping: A review
Ahmed N.
Journal of Manufacturing Processes , 2019
61.
rcr_89_12_1507bib61
Arabi-Hashemi
Appl. Mater. Today , 2020
62.
Making Parts One Layer at a Time
Toensmeier P.
Plastics Engineering , 2017
63.
Innovate, Develop, Fabricate!
Romeo J.
Plastics Engineering , 2019
64.
Design and 3D printing of a stainless steel reactor for continuous difluoromethylations using fluoroform
Gutmann B., Köckinger M., Glotz G., Ciaglia T., Slama E., Zadravec M., Pfanner S., Maier M.C., Gruber-Wölfler H., Oliver Kappe C.
Reaction Chemistry and Engineering , 2017
65.
To kit or not to kit: Analysing the value of model-based kitting for additive manufacturing
Khajavi S.H., Baumers M., Holmström J., Özcan E., Atkin J., Jackson W., Li W.
Computers in Industry , 2018
66.
rcr_89_12_1507bib66
67.
rcr_89_12_1507bib67
68.
Use of ultrasonic consolidation for fabrication of multi‐material structures
Janaki Ram G.D., Robinson C., Yang Y., Stucker B.E.
Rapid Prototyping Journal , 2007
70.
rcr_89_12_1507bib70
Gibson
2015
72.
Jardini A.L., Filho R.M., Scarparo M.A., Andrade S.R., Moura L.F.
International Journal of Materials and Product Technology , 2005
73.
rcr_89_12_1507bib73
Bártolo
2011
75.
rcr_89_12_1507bib75
Herbert
J. Appl. Photogr. Eng. , 1982
76.
rcr_89_12_1507bib76
77.
Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles
Okafor O., Weilhard A., Fernandes J.A., Karjalainen E., Goodridge R., Sans V.
Reaction Chemistry and Engineering , 2017
78.
Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces
Jafari R., Cloutier C., Allahdini A., Momen G.
International Journal of Advanced Manufacturing Technology , 2019
80.
Two-photon polymerization for biological applications
Nguyen A.K., Narayan R.J.
Materials Today , 2017
81.
3D printing methods for micro- and nanostructures
Fritzler K.B., Prinz V.Y.
Physics-Uspekhi , 2017
83.
Continuous liquid interface production of 3D objects
Tumbleston J.R., Shirvanyants D., Ermoshkin N., Janusziewicz R., Johnson A.R., Kelly D., Chen K., Pinschmidt R., Rolland J.P., Ermoshkin A., Samulski E.T., DeSimone J.M.
Science , 2015
84.
rcr_89_12_1507bib84
86.
Weld formation during material extrusion additive manufacturing
Seppala J.E., Hoon Han S., Hillgartner K.E., Davis C.S., Migler K.B.
Soft Matter , 2017
87.
rcr_89_12_1507bib87
88.
rcr_89_12_1507bib88
McLouth
Addit. Manuf. , 2017
89.
Anisotropic material properties of fused deposition modeling ABS
Ahn S., Montero M., Odell D., Roundy S., Wright P.K.
Rapid Prototyping Journal , 2002
91.
Functional 3D Printing for Microfluidic Chips
Weisgrab G., Ovsianikov A., Costa P.F.
Advanced Materials Technologies , 2019
92.
rcr_89_12_1507bib92
Daminabo
Mater. Today Chem. , 2020
94.
rcr_89_12_1507bib94
Rosales
Proc. Manuf. , 2017
96.
Fused deposition modeling with polypropylene
Carneiro O.S., Silva A.F., Gomes R.
Materials and Design , 2015
97.
rcr_89_12_1507bib97
99.
rcr_89_12_1507bib99
Peterson
Addit. Manuf. , 2019
105.
rcr_89_12_1507bib105
106.
rcr_89_12_1507bib106
107.
rcr_89_12_1507bib107
Wittbrodt
Addit. Manuf. , 2015
108.
The Use of Self-replicated Parts for Improving the Design and the Accuracy of a Low-cost 3D Printer
Minetola P., Galati M., Iuliano L., Atzeni E., Salmi A.
Procedia CIRP , 2018
110.
A simple procedure to produce FDM-based 3D-printed microfluidic devices with an integrated PMMA optical window
Bressan L.P., Adamo C.B., Quero R.F., de Jesus D.P., da Silva J.A.
Analytical Methods , 2019
111.
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela J., Kokkari A., Korhonen H., Malin M., Närhi T., Seppälä J.
Journal of Biomedical Materials Research - Part B Applied Biomaterials , 2012
112.
rcr_89_12_1507bib112
Liang
Sci. Adv. , 2018
115.
rcr_89_12_1507bib115
Liu
Mater. Today Adv. , 2020
117.
PLA composites: From production to properties.
Murariu M., Dubois P.
Advanced Drug Delivery Reviews , 2016
118.
rcr_89_12_1507bib118
Mirón
Proc. Manuf. , 2017
120.
rcr_89_12_1507bib120
Ding
J. Appl. Polym. Sci. , 2020
121.
rcr_89_12_1507bib121
Ye
ACS Sust. Chem. Eng. , 2019
122.
rcr_89_12_1507bib122
Li
IOP Conf. Ser.: Mater. Sci. Eng. , 2018
123.
Effect of wood content in FDM filament on properties of 3D printed parts
Kariz M., Sernek M., Obućina M., Kuzman M.K.
Materials Today Communications , 2018
124.
Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM)
Depuydt D., Balthazar M., Hendrickx K., Six W., Ferraris E., Desplentere F., Ivens J., Van Vuure A.W.
Polymer Composites , 2018
126.
Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling
Zhang X., Chen L., Mulholland T., Osswald T.A.
Polymers for Advanced Technologies , 2019
128.
rcr_89_12_1507bib128
Lee
Addit. Manuf. , 2019
129.
Shape recovery characteristics of SiC/C/PLA composite filaments and 3D printed parts
Liu W., Wu N., Pochiraju K.
Composites - Part A: Applied Science and Manufacturing , 2018
130.
Mechanical properties of PLA-graphene filament for FDM 3D printing
Camargo J.C., Machado Á.R., Almeida E.C., Silva E.F.
International Journal of Advanced Manufacturing Technology , 2019
131.
The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites
Patanwala H.S., Hong D., Vora S.R., Bognet B., Ma A.W.
Polymer Composites , 2017
134.
3D–printing of materials with anisotropic heat distribution using conductive polylactic acid composites
Zhuang Y., Song W., Ning G., Sun X., Sun Z., Xu G., Zhang B., Chen Y., Tao S.
Materials and Design , 2017
135.
Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications
Spinelli G., Lamberti P., Tucci V., Ivanova R., Tabakova S., Ivanov E., Kotsilkova R., Cimmino S., Di Maio R., Silvestre C.
Composites Part B: Engineering , 2019
136.
rcr_89_12_1507bib136
137.
rcr_89_12_1507bib137
Flowers
Addit. Manuf. , 2017
138.
Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling
Fafenrot S., Grimmelsmann N., Wortmann M., Ehrmann A.
Materials , 2017
139.
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh G.D., Yap Y.L., Agarwala S., Yeong W.Y.
Advanced Materials Technologies , 2018
141.
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki R., Ueda M., Namiki M., Jeong T., Asahara H., Horiguchi K., Nakamura T., Todoroki A., Hirano Y.
Scientific Reports , 2016
142.
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Akhoundi B., Behravesh A.H., Bagheri Saed A.
Journal of Reinforced Plastics and Composites , 2018
143.
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian X., Liu T., Yang C., Wang Q., Li D.
Composites - Part A: Applied Science and Manufacturing , 2016
144.
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Heidari-Rarani M., Rafiee-Afarani M., Zahedi A.M.
Composites Part B: Engineering , 2019
146.
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Goyanes A., Kobayashi M., Martínez-Pacheco R., Gaisford S., Basit A.W.
International Journal of Pharmaceutics , 2016
148.
3D printing of bone tissue engineering scaffolds
Wang C., Huang W., Zhou Y., He L., He Z., Chen Z., He X., Tian S., Liao J., Lu B., Wei Y., Wang M.
Bioactive Materials , 2020
150.
rcr_89_12_1507bib150
Marwah
J. Phys.: Conf. Ser. , 2019
152.
rcr_89_12_1507bib152
Heikkinen
Addit. Manuf. , 2018
153.
Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding
Lay M., Thajudin N.L., Hamid Z.A., Rusli A., Abdullah M.K., Shuib R.K.
Composites Part B: Engineering , 2019
154.
Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite
Quan Z., Larimore Z., Wu A., Yu J., Qin X., Mirotznik M., Suhr J., Byun J., Oh Y., Chou T.
Composites Science and Technology , 2016
156.
Electrically conductive nanocomposites for fused deposition modelling
Dorigato A., Moretti V., Dul S., Unterberger S.H., Pegoretti A.
Synthetic Metals , 2017
159.
Tensile strength and hardness property of ABS filled CuO prepared via 3D printing approach
Hamzah K.A., Keat Y.C., Leng T.P., Noor M.M., Sazali S.A., Yun A.Y.
Materials Today: Proceedings , 2019
162.
Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials—A Laboratory Peel-off Study
Xu Y., Unkovskiy A., Klaue F., Rupp F., Geis-Gerstorfer J., Spintzyk S.
Materials , 2018
164.
Optimization of FDM 3D printing process parameters for multi-material using artificial neural network
Yadav D., Chhabra D., Kumar Garg R., Ahlawat A., Phogat A.
Materials Today: Proceedings , 2020
165.
Experimental investigation on mechanical properties of PETG material processed by fused deposition modeling method
Durgashyam K., Indra Reddy M., Balakrishna A., Satyanarayana K.
Materials Today: Proceedings , 2019
166.
rcr_89_12_1507bib166
167.
Selected Mechanical Properties of PETG 3-D Prints
Szykiedans K., Credo W., Osiński D.
Procedia Engineering , 2017
168.
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger J., Sirrine J.M., Williams C.B., Long T.E.
Progress in Polymer Science , 2019
169.
3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments
Kim K., Park J., Suh J., Kim M., Jeong Y., Park I.
Sensors and Actuators, A: Physical , 2017
170.
Printed strain sensor based on silver nanowire/silver flake composite on flexible and stretchable TPU substrate
Mohammed Ali M., Maddipatla D., Narakathu B.B., Chlaihawi A.A., Emamian S., Janabi F., Bazuin B.J., Atashbar M.Z.
Sensors and Actuators, A: Physical , 2018
172.
3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications
Bachtiar E.O., Erol O., Millrod M., Tao R., Gracias D.H., Romer L.H., Kang S.H.
Journal of the Mechanical Behavior of Biomedical Materials , 2020
173.
Fabrication of 3D freeform porous tubular constructs with mechanical flexibility mimicking that of soft vascular tissue
Lee J.E., Park S.J., Yoon Y., Son Y., Park S.
Journal of the Mechanical Behavior of Biomedical Materials , 2019
174.
Filament Materials Screening for FDM 3D Printing by Means of Injection‐Molded Short Rods
Jin M., Giesa R., Neuber C., Schmidt H.
Macromolecular Materials and Engineering , 2018
175.
Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing
Spoerk M., Gonzalez-Gutierrez J., Lichal C., Cajner H., Berger G., Schuschnigg S., Cardon L., Holzer C.
Polymers , 2018
176.
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Spoerk M., Arbeiter F., Raguž I., Weingrill G., Fischinger T., Traxler G., Schuschnigg S., Cardon L., Holzer C.
Macromolecular Materials and Engineering , 2018
177.
Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
Kaynak B., Spoerk M., Shirole A., Ziegler W., Sapkota J.
Macromolecular Materials and Engineering , 2018
178.
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Spoerk M., Savandaiah C., Arbeiter F., Traxler G., Cardon L., Holzer C., Sapkota J.
Composites - Part A: Applied Science and Manufacturing , 2018
179.
rcr_89_12_1507bib179
Spoerk
J. Appl. Polym. Sci. , 2019
180.
Shrinkage reduction and morphological characterization of PP reinforced with glass fiber and nanoclay using functionalized PP as compatibilizer
Cadena-Perez A.M., Yañez-Flores I., Sanchez-Valdes S., Rodriguez-Fernandez O.S., Fernandez-Tavizon S., de Valle L.F., Lozano-Ramirez T., Martinez-Colunga J.G., Sanchez-Cuevas J.L.
International Journal of Material Forming , 2015
183.
rcr_89_12_1507bib183
184.
Electrically conductive filament for 3D-printed circuits and sensors
Kwok S.W., Goh K.H., Tan Z.D., Tan S.T., Tjiu W.W., Soh J.Y., Ng Z.J., Chan Y.Z., Hui H.K., Goh K.E.
Applied Materials Today , 2017
185.
3D Printing for Electrochemical Energy Applications
Browne M.P., Redondo E., Pumera M.
Chemical Reviews , 2020
187.
rcr_89_12_1507bib187
Kucherov
Angew. Chem., Int. Ed. , 2017
190.
rcr_89_12_1507bib190
Sanchez
J. Clean. Prod. , 2020
191.
A miniaturised 3D printed polypropylene reactor for online reaction analysis by mass spectrometry
Scotti G., Nilsson S.M., Haapala M., Pöhö P., Boije af Gennäs G., Yli-Kauhaluoma J., Kotiaho T.
Reaction Chemistry and Engineering , 2017
192.
Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
Chong S., Pan G., Khalid M., Yang T.C., Hung S., Huang C.
Journal of Polymers and the Environment , 2016
193.
rcr_89_12_1507bib193
Schirmeister
Addit. Manuf. , 2019
194.
rcr_89_12_1507bib194
Nabipour
Inc. J. Appl. Polym. Sci. , 2020
195.
Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
Kreiger M.A., Mulder M.L., Glover A.G., Pearce J.M.
Journal of Cleaner Production , 2014
196.
rcr_89_12_1507bib196
Mostafa
Proc. Manuf. , 2018
197.
rcr_89_12_1507bib197
Verdejo de Toro
Proc. Manuf. , 2019
198.
Preparation and characterization of a newly developed polyamide composite utilising an affordable 3D printer
Tuan Rahim T.N., Abdullah A.M., Md Akil H., Mohamad D., Rajion Z.A.
Journal of Reinforced Plastics and Composites , 2015
200.
Rahim T.N., Abdullah A.M., Md Akil H., Mohamad D., Rajion Z.A.
Express Polymer Letters , 2017
201.
rcr_89_12_1507bib201
Lüftl
2014
202.
Atmospheric pressure air plasma treatment to improve the 3D printing of polyoxymethylene
Muro‐Fraguas I., Sainz‐García E., Pernía‐Espinoza A., Alba‐Elías F.
Plasma Processes and Polymers , 2019
203.
3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump
von Petersdorff-Campen K., Hauswirth Y., Carpenter J., Hagmann A., Boës S., Schmid Daners M., Penner D., Meboldt M.
Applied Sciences (Switzerland) , 2018
205.
Improving the mechanical properties of isosorbide copolycarbonates by varying the ratio of comonomers
Lee C., Takagi H., Okamoto H., Kato M.
Journal of Applied Polymer Science , 2012
207.
rcr_89_12_1507bib207
Park
Addit. Manuf. , 2020
208.
Polyvinylidene fluoride (PVDF) as a feedstock for material extrusion additive manufacturing
Momenzadeh N., Miyanaji H., Porter D.A., Berfield T.A.
Rapid Prototyping Journal , 2020
210.
rcr_89_12_1507bib210
Kim
Macromol. Mater. Eng. , 2017
211.
rcr_89_12_1507bib211
Valentan
Mater. Technol. , 2013
212.
3D printing of PEEK reactors for flow chemistry and continuous chemical processing
Harding M.J., Brady S., O'Connor H., Lopez-Rodriguez R., Edwards M.D., Tracy S., Dowling D., Gibson G., Girard K.P., Ferguson S.
Reaction Chemistry and Engineering , 2020
213.
High performance polymer nanocomposites for additive manufacturing applications
de Leon A.C., Chen Q., Palaganas N.B., Palaganas J.O., Manapat J., Advincula R.C.
Reactive and Functional Polymers , 2016
214.
Accelerated degradation of Polyetheretherketone (PEEK) composite materials for recycling applications
Dandy L.O., Oliveux G., Wood J., Jenkins M.J., Leeke G.A.
Polymer Degradation and Stability , 2015
215.
Determination of Polyetheretherketone (PEEK) mechanical properties as a denture material
Muhsin S.A., Hatton P.V., Johnson A., Sereno N., Wood D.J.
Saudi Dental Journal , 2019
217.
A gentle introduction to the noble art of flow chemistry
Bannock J.H., Krishnadasan S.H., Heeney M., de Mello J.C.
Materials Horizons , 2014
218.
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi M., Ghidini T., Cecchini F., Brandao A., Nanni F.
Composites Part B: Engineering , 2018
219.
Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
Geng P., Zhao J., Wu W., Ye W., Wang Y., Wang S., Zhang S.
Journal of Manufacturing Processes , 2019
220.
Najeeb S., Zafar M.S., Khurshid Z., Siddiqui F.
Journal of Prosthodontic Research , 2016
221.
PEEK with Reinforced Materials and Modifications for Dental Implant Applications
Rahmitasari F., Ishida Y., Kurahashi K., Matsuda T., Watanabe M., Ichikawa T.
Dentistry Journal , 2017
222.
Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
Han X., Yang D., Yang C., Spintzyk S., Scheideler L., Li P., Li D., Geis-Gerstorfer J., Rupp F.
Journal of Clinical Medicine , 2019
224.
rcr_89_12_1507bib224
Dizon
Addit. Manuf. , 2018
225.
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu H., Fahy W.P., Kim S., Kim H., Zhao N., Pilato L., Kafi A., Bateman S., Koo J.H.
Progress in Materials Science , 2020
226.
Additive manufacturing for space: status and promises
Sacco E., Moon S.K.
International Journal of Advanced Manufacturing Technology , 2019
227.
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
González-Henríquez C.M., Sarabia-Vallejos M.A., Rodriguez-Hernandez J.
Progress in Polymer Science , 2019
228.
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Cicala G., Ognibene G., Portuesi S., Blanco I., Rapisarda M., Pergolizzi E., Recca G.
Materials , 2018
229.
rcr_89_12_1507bib229
Zawaski
Addit. Manuf. , 2020
230.
rcr_89_12_1507bib230
231.
3D printed Polycaprolactone scaffolds with dual macro-microporosity for applications in local delivery of antibiotics
Visscher L.E., Dang H.P., Knackstedt M.A., Hutmacher D.W., Tran P.A.
Materials Science and Engineering C , 2018
232.
rcr_89_12_1507bib232
Jiao
Adv. Ind. Eng. Polym. Res. , 2019
233.
3D bio-printing of levan/polycaprolactone/gelatin blends for bone tissue engineering: Characterization of the cellular behavior
Duymaz B.T., Erdiler F.B., Alan T., Aydogdu M.O., Inan A.T., Ekren N., Uzun M., Sahin Y.M., Bulus E., Oktar F.N., Selvi S.S., ToksoyOner E., Kilic O., Bostan M.S., Eroglu M.S., et. al.
European Polymer Journal , 2019
234.
rcr_89_12_1507bib234
Ghorbani
Mater. Today Commun. , 2020
235.
Effects of different sterilization processes on the properties of a novel 3D-printed polycaprolactone stent
Guerra A.J., Cano P., Rabionet M., Puig T., Ciurana J.
Polymers for Advanced Technologies , 2018
238.
rcr_89_12_1507bib238
Thompson
Addit. Manuf. , 2019
239.
rcr_89_12_1507bib239
Liu
Mater. Lett. , 2020
240.
Effect of Process Parameters on Dynamic Mechanical Performance of FDM PC/ABS Printed Parts Through Design of Experiment
Mohamed O.A., Masood S.H., Bhowmik J.L., Nikzad M., Azadmanjiri J.
Journal of Materials Engineering and Performance , 2016
242.
Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process
Tambrallimath V., Keshavamurthy R., D S., Koppad P.G., Kumar G.S.
Composites Communications , 2019
243.
3D Printing with Core–Shell Filaments Containing High or Low Density Polyethylene Shells
Peng F., Jiang H., Woods A., Joo P., Amis E.J., Zacharia N.S., Vogt B.D.
ACS Applied Polymer Materials , 2019
244.
rcr_89_12_1507bib244
de León
Mater. Design , 2019
245.
rcr_89_12_1507bib245
Decker
Int. J. Addit. Subtract. Mater. Manufact. , 2017
246.
rcr_89_12_1507bib246
Kim
Proc. Manuf. , 2017
247.
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Singh R., Kumar R., Farina I., Colangelo F., Feo L., Fraternali F.
Polymers , 2019
248.
3D printing to enable multifunctionality in polymer-based composites: A review
Bekas D.G., Hou Y., Liu Y., Panesar A.
Composites Part B: Engineering , 2019
249.
Fundamentals and applications of 3D printing for novel materials
Lee J., An J., Chua C.K.
Applied Materials Today , 2017
250.
3D-Printed Mechanochromic Materials
Peterson G.I., Larsen M.B., Ganter M.A., Storti D.W., Boydston A.J.
ACS applied materials & interfaces , 2014
251.
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino A.D., Dizon J.R., Espera A.H., Chen Q., Messman J., Advincula R.C.
Progress in Polymer Science , 2019
252.
Direct-write assembly of ceramics from colloidal inks
Lewis J.A.
Current Opinion in Solid State and Materials Science , 2002
253.
Robocasting of silicon nitride with controllable shape and architecture for biomedical applications
Zhao S., Xiao W., Rahaman M.N., O'Brien D., Seitz-Sampson J.W., Sonny Bal B.
International Journal of Applied Ceramic Technology , 2016
254.
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer D.M., Gorkin III R., in het Panhuis M.
Journal of Materials Chemistry B , 2015
255.
Printability of 3D Printed Hydrogel Scaffolds: Influence of Hydrogel Composition and Printing Parameters
Naghieh S., Sarker M., Sharma N.K., Barhoumi Z., Chen X.
Applied Sciences (Switzerland) , 2019
256.
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst T., Smolan W., Schacht K., Scheibel T., Groll J.
Chemical Reviews , 2015
257.
Designing Biomaterials for 3D Printing
Guvendiren M., Molde J., Soares R.M., Kohn J.
ACS Biomaterials Science and Engineering , 2016
258.
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji S., Guvendiren M.
Frontiers in Bioengineering and Biotechnology , 2017
259.
Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review
Lee J.M., Yeong W.Y.
Advanced healthcare materials , 2016
260.
3D printing of ceramics: A review
Chen Z., Li Z., Li J., Liu C., Lao C., Fu Y., Liu C., Li Y., Wang P., He Y.
Journal of the European Ceramic Society , 2019
262.
Direct Ink Writing of Three-Dimensional Ceramic Structures
Lewis J.A., Smay J.E., Stuecker J., Cesarano J.
Journal of the American Ceramic Society , 2006
263.
Robocasting of structural ceramic parts with hydrogel inks
Feilden E., Blanca E.G., Giuliani F., Saiz E., Vandeperre L.
Journal of the European Ceramic Society , 2016
265.
Additive manufacturing of biologically-inspired materials
Studart A.R.
Chemical Society Reviews , 2016
266.
rcr_89_12_1507bib266
Kalsoom
RSC Adv. , 2016
267.
rcr_89_12_1507bib267
Bonada
Proc. Manuf. , 2019
268.
Environment-friendly and reusable ink for 3D printing of metallic structures
Xu C., Wu Q., L'Espérance G., Lebel L.L., Therriault D.
Materials and Design , 2018
269.
Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing
Wei P., Leng H., Chen Q., Advincula R.C., Pentzer E.B.
ACS Applied Polymer Materials , 2019
271.
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim J.H., Lee S., Wajahat M., Jeong H., Chang W.S., Jeong H.J., Yang J., Kim J.T., Seol S.K.
ACS Nano , 2016
272.
Recent advances on 3D printing graphene-based composites
Guo H., Lv R., Bai S.
Nano Materials Science , 2019
273.
Additive manufacturing high performance graphene-based composites: A review
Li Y., Feng Z., Huang L., Essa K., Bilotti E., Zhang H., Peijs T., Hao L.
Composites - Part A: Applied Science and Manufacturing , 2019
274.
Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications.
Jakus A.E., Secor E.B., Rutz A.L., Jordan S.W., Hersam M.C., Shah R.N.
ACS Nano , 2015
275.
3D Printing of Graphene Aerogels
Zhang Q., Zhang F., Medarametla S.P., Li H., Zhou C., Lin D.
Small , 2016
276.
3D-Printing of Lightweight Cellular Composites
Compton B.G., Lewis J.A.
Advanced Materials , 2014
277.
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon S.C., Liska R., Stampfl J., Gurr M., Mülhaupt R.
Chemical Reviews , 2017
278.
Photopolymerization in 3D Printing
Bagheri A., Jin J.
ACS Applied Polymer Materials , 2019
279.
Kholkhoev Bato Chingisovich, Bardakova Kseniya Nikolaevna, Minaev Nikita Vladimirovich, Kupriyanova Olga S, Gorenskaia Elena Nikolaevna, Zharikova Tatiana Mikhailovna, Timashev Petr Sergeevich, Burdukovskii Vitaliy Fedorovich
Mendeleev Communications , 2019
280.
rcr_89_12_1507bib280
Barone
Proc. Manuf. , 2019
281.
Changes in Roughness and Mechanical Properties of Invisalign® Appliances after One- and Two-Weeks Use
Papadopoulou A.K., Cantele A., Polychronis G., Zinelis S., Eliades T.
Materials , 2019
282.
Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer
Weng Z., Zhou Y., Lin W., Senthil T., Wu L.
Composites - Part A: Applied Science and Manufacturing , 2016
283.
Fabrication of graphene-based 3D structures by stereolithography
Korhonen H., Sinh L.H., Luong N.D., Lehtinen P., Verho T., Partanen J., Seppälä J.
Physica Status Solidi (A) Applications and Materials Science , 2015
284.
Three-dimensional printing of transparent fused silica glass
Kotz F., Arnold K., Bauer W., Schild D., Keller N., Sachsenheimer K., Nargang T.M., Richter C., Helmer D., Rapp B.E.
Nature , 2017
285.
Additive manufacturing of polymer-derived ceramics
Eckel Z.C., Zhou C., Martin J.H., Jacobsen A.J., Carter W.B., Schaedler T.A.
Science , 2016
286.
Novel Materials for 3D Printing by Photopolymerization
Layani M., Wang X., Magdassi S.
Advanced Materials , 2018
287.
Chemistry from 3D printed objects
Hartings M.R., Ahmed Z.
Nature Reviews Chemistry , 2019
288.
rcr_89_12_1507bib288
Gupta
2019
289.
rcr_89_12_1507bib289
Mwema
2020
290.
Additive Manufacturing Technologies: 3D Printing in Organic Synthesis
Rossi S., Puglisi A., Benaglia M.
ChemCatChem , 2018
291.
3D printing of versatile reactionware for chemical synthesis
Kitson P.J., Glatzel S., Chen W., Lin C., Song Y., Cronin L.
Nature Protocols , 2016
292.
3D-printing technologies for electrochemical applications
Ambrosi A., Pumera M.
Chemical Society Reviews , 2016
293.
Combining additive manufacturing and catalysis: a review
Hurt C., Brandt M., Priya S.S., Bhatelia T., Patel J., Selvakannan P., Bhargava S.
Catalysis Science and Technology , 2017
297.
Digitization of multistep organic synthesis in reactionware for on-demand pharmaceuticals
Kitson P.J., Marie G., Francoia J., Zalesskiy S.S., Sigerson R.C., Mathieson J.S., Cronin L.
Science , 2018
298.
Low-budget 3D-printed equipment for continuous flow reactions
Neumaier J.M., Madani A., Klein T., Ziegler T.
Beilstein Journal of Organic Chemistry , 2019
299.
3D printing of a heterogeneous copper-based catalyst
Tubío C.R., Azuaje J., Escalante L., Coelho A., Guitián F., Sotelo E., Gil A.
Journal of Catalysis , 2016
300.
rcr_89_12_1507bib300
Zhu
Sci. Adv. , 2018
301.
The digital code driven autonomous synthesis of ibuprofen automated in a 3D-printer-based robot
Kitson P.J., Glatzel S., Cronin L.
Beilstein Journal of Organic Chemistry , 2016
302.
Synthesis of many different types of organic small molecules using one automated process
Li J., Ballmer S.G., Gillis E.P., Fujii S., Schmidt M.J., Palazzolo A.M., Lehmann J.W., Morehouse G.F., Burke M.D.
Science , 2015
303.
Organic synthesis in a modular robotic system driven by a chemical programming language
Steiner S., Wolf J., Glatzel S., Andreou A., Granda J.M., Keenan G., Hinkley T., Aragon-Camarasa G., Kitson P.J., Angelone D., Cronin L.
Science , 2019
304.
3D Printed High-Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale-Up
Kitson P.J., Marshall R.J., Long D., Forgan R.S., Cronin L.
Angewandte Chemie - International Edition , 2014
305.
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes M.D., Kitson P.J., Yan J., Richmond C.J., Cooper G.J., Bowman R.W., Vilbrandt T., Cronin L.
Nature Chemistry , 2012
306.
3D designed and printed chemical generators for on demand reagent synthesis
Zalesskiy S.S., Kitson P.J., Frei P., Bubliauskas A., Cronin L.
Nature Communications , 2019
307.
Design and additive manufacture for flow chemistry
Capel A.J., Edmondson S., Christie S.D., Goodridge R.D., Bibb R.J., Thurstans M.
Lab on a Chip , 2013
308.
Stereoselective Catalytic Synthesis of Active Pharmaceutical Ingredients in Homemade 3D-Printed Mesoreactors.
Rossi S., Porta R., Brenna D., Puglisi A., Benaglia M.
Angewandte Chemie - International Edition , 2017
309.
rcr_89_12_1507bib309
310.
3D-Printed Microfluidics
Au A.K., Huynh W., Horowitz L.F., Folch A.
Angewandte Chemie - International Edition , 2016
311.
3D-printed miniaturized fluidic tools in chemistry and biology
Dixit C.K., Kadimisetty K., Rusling J.
TrAC - Trends in Analytical Chemistry , 2018
312.
3D printed microfluidics and microelectronics
Sochol R.D., Sweet E., Glick C.C., Wu S., Yang C., Restaino M., Lin L.
Microelectronic Engineering , 2018
313.
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee N., Urrios A., Kang S., Folch A.
Lab on a Chip , 2016
314.
Microfluidic Devices and 3D Printing for Synthesis and Screening of Drugs and Tissue Engineering
Santana H.S., Palma M.S., Lopes M.G., Souza J., Lima G.A., Taranto O.P., Silva J.L.
Industrial & Engineering Chemistry Research , 2019
315.
Opportunities for 3D printed millifluidic platforms incorporating on-line sample handling and separation
Cocovi-Solberg D.J., Worsfold P.J., Miró M.
TrAC - Trends in Analytical Chemistry , 2018
316.
Advances in Microfluidic Materials, Functions, Integration, and Applications
Nge P.N., Rogers C.I., Woolley A.T.
Chemical Reviews , 2013
317.
A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects
Gale B., Jafek A., Lambert C., Goenner B., Moghimifam H., Nze U., Kamarapu S.
Inventions , 2018
318.
Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms.
Macdonald N.P., Cabot J.M., Smejkal P., Guijt R.M., Paull B., Breadmore M.C.
Analytical Chemistry , 2017
319.
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson P.J., Rosnes M.H., Sans V., Dragone V., Cronin L.
Lab on a Chip , 2012
321.
Discrete elements for 3D microfluidics
Bhargava K.C., Thompson B., Malmstadt N.
Proceedings of the National Academy of Sciences of the United States of America , 2014
322.
3D printed microfluidic circuitry via multijet-based additive manufacturing
Sochol R.D., Sweet E., Glick C.C., Venkatesh S., Avetisyan A., Ekman K.F., Raulinaitis A., Tsai A., Wienkers A., Korner K., Hanson K., Long A., Hightower B.J., Slatton G., Burnett D.C., et. al.
Lab on a Chip , 2016
323.
3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors
Parra-Cabrera C., Achille C., Kuhn S., Ameloot R.
Chemical Society Reviews , 2018
324.
Direct 3D Printing of Catalytically Active Structures
Manzano J.S., Weinstein Z.B., Sadow A.D., Slowing I.I.
ACS Catalysis , 2017
325.
rcr_89_12_1507bib325
Díaz-Marta
ACS Appl. Mater. Interfaces , 2019
326.
Stereolithography 3D-Printed Catalytically Active Devices in Organic Synthesis
Rossi S., Puglisi A., Raimondi L.M., Benaglia M.
Catalysts , 2020
328.
Aerobic Methanol Oxidation over Unsupported Nanoporous Gold: The Influence of an Added Base
Lackmann A., Mahr C., Rosenauer A., Bäumer M., Wittstock A.
Catalysts , 2019
329.
3D Printed Palladium Catalyst for Suzuki‐Miyaura Cross‐coupling Reactions
Bulatov E., Lahtinen E., Kivijärvi L., Hey‐Hawkins E., Haukka M.
ChemCatChem , 2020
330.
Design and development of 3D printed catalytically-active stirrers for chemical synthesis
Penny M.R., Hilton S.T.
Reaction Chemistry and Engineering , 2020
332.
Recent Advances in Analytical Chemistry by 3D Printing
Gross B., Lockwood S.Y., Spence D.M.
Analytical Chemistry , 2016
334.
3D printing in analytical chemistry: current state and future
Nesterenko P.N.
Pure and Applied Chemistry , 2020
335.
Current and future impact of 3D printing on the separation sciences
Kalsoom U., Nesterenko P.N., Paull B.
TrAC - Trends in Analytical Chemistry , 2018
336.
A 3D Printed Fluidic Device that Enables Integrated Features
Anderson K.B., Lockwood S.Y., Martin R.S., Spence D.M.
Analytical Chemistry , 2013
337.
FDM 3D Printing of High-Pressure, Heat-Resistant, Transparent Microfluidic Devices
Romanov V., Samuel R., Chaharlang M., Jafek A.R., Frost A., Gale B.K.
Analytical Chemistry , 2018
338.
Template for 3D Printing a Low-Temperature Plasma Probe
Martínez-Jarquín S., Moreno-Pedraza A., Guillén-Alonso H., Winkler R.
Analytical Chemistry , 2016
339.
3D printed porous media columns with fine control of column packing morphology
Fee C., Nawada S., Dimartino S.
Journal of Chromatography A , 2014
341.
PDMS lab-on-a-chip fabrication using 3D printed templates.
Comina G., Suska A., Filippini D.
Lab on a Chip , 2014
342.
rcr_89_12_1507bib342
Wong
Anal. Chem. , 2014
343.
Integrating Biochemiluminescence Detection on Smartphones: Mobile Chemistry Platform for Point-of-Need Analysis
Roda A., Michelini E., Cevenini L., Calabria D., Calabretta M.M., Simoni P.
Analytical Chemistry , 2014
344.
The modern role of smartphones in analytical chemistry
Rezazadeh M., Seidi S., Lid M., Pedersen-Bjergaard S., Yamini Y.
TrAC - Trends in Analytical Chemistry , 2019
345.
Micro free flow electrophoresis
Johnson A.C., Bowser M.T.
Lab on a Chip , 2018
346.
3D Printed Micro Free-Flow Electrophoresis Device
Anciaux S.K., Geiger M., Bowser M.T.
Analytical Chemistry , 2016
347.
Point-of-Care Diagnostics: Recent Developments in a Connected Age.
Nayak S., Blumenfeld N.R., Laksanasopin T., Sia S.K.
Analytical Chemistry , 2016
348.
Simple, Cost-Effective 3D Printed Microfluidic Components for Disposable, Point-of-Care Colorimetric Analysis
Chan H.N., Shu Y., Xiong B., Chen Y., Chen Y., Tian Q., Michael S.A., Shen B., Wu H.
ACS Sensors , 2015
349.
Multimaterial 3D Printed Fluidic Device for Measuring Pharmaceuticals in Biological Fluids
Li F., Macdonald N.P., Guijt R.M., Breadmore M.C.
Analytical Chemistry , 2018
351.
Paper spray ionization: Applications and perspectives
McBride E.M., Mach P.M., Dhummakupt E.S., Dowling S., Carmany D.O., Demond P.S., Rizzo G., Manicke N.E., Glaros T.
TrAC - Trends in Analytical Chemistry , 2019
352.
Paper spray ionization and portable mass spectrometers: a review
Silva L.C., Pereira I., Carvalho T.C., Allochio Filho J.F., Romão W., Gontijo Vaz B.
Analytical Methods , 2019
353.
3D-Printed Paper Spray Ionization Cartridge with Fast Wetting and Continuous Solvent Supply Features
Salentijn G.I., Permentier H.P., Verpoorte E.
Analytical Chemistry , 2014
354.
3D printing of microfluidic devices for paper-assisted direct spray ionization mass spectrometry
Duarte L.C., Colletes de Carvalho T., Lobo-Júnior E.O., Abdelnur P.V., Vaz B.G., Coltro W.K.
Analytical Methods , 2016
355.
Continuous parallel ESI-MS analysis of reactions carried out in a bespoke 3D printed device
Mathieson J.S., Rosnes M.H., Sans V., Kitson P.J., Cronin L.
Beilstein Journal of Nanotechnology , 2013
356.
Autonomous in Situ Analysis and Real-Time Chemical Detection Using a Backpack Miniature Mass Spectrometer: Concept, Instrumentation Development, and Performance
Hendricks P.I., Dalgleish J.K., Shelley J.T., Kirleis M.A., McNicholas M.T., Li L., Chen T., Chen C., Duncan J.S., Boudreau F., Noll R.J., Denton J.P., Roach T.A., Ouyang Z., Cooks R.G., et. al.
Analytical Chemistry , 2014
357.
Direct writing in three dimensions
Lewis J.A., Gratson G.M.
Materials Today , 2004
359.
Direct Production of Microstructured Surfaces for Planar Chromatography Using 3D Printing
Macdonald N.P., Currivan S.A., Tedone L., Paull B.
Analytical Chemistry , 2017
360.
3D-printed porous bed structures
Fee C.
Current Opinion in Chemical Engineering , 2017
361.
rcr_89_12_1507bib361
Wang
Anal. Chem. , 2017
363.
3D-printed flow system for determination of lead in natural waters
Mattio E., Robert-Peillard F., Branger C., Puzio K., Margaillan A., Brach-Papa C., Knoery J., Boudenne J., Coulomb B.
Talanta , 2017
364.
Recent advances in flow injection analysis
Trojanowicz M., Kołacińska K.
The Analyst , 2016
365.
3D printed metal columns for capillary liquid chromatography
Sandron S., Heery B., Gupta V., Collins D.A., Nesterenko E.P., Nesterenko P.N., Talebi M., Beirne S., Thompson F., Wallace G.G., Brabazon D., Regan F., Paull B.
The Analyst , 2014
367.
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Low Z., Chua Y.T., Ray B.M., Mattia D., Metcalfe I.S., Patterson D.A.
Journal of Membrane Science , 2017
368.
rcr_89_12_1507bib368
Seo
ACS Appl. Mater. Interfaces , 2016
369.
Print your membrane: Rapid prototyping of complex 3D-PDMS membranes via a sacrificial resist
Femmer T., Kuehne A.J., Torres-Rendon J., Walther A., Wessling M.
Journal of Membrane Science , 2015
370.
3D printed microfluidics for biological applications
Ho C.M., Ng S.H., Li K.H., Yoon Y.
Lab on a Chip , 2015
371.
rcr_89_12_1507bib371
372.
3D Printed Sensors for Biomedical Applications: A Review
Han T., Kundu S., Nag A., Xu Y.
Sensors , 2019
373.
Recent Progress in 3D Printed Mold-Based Sensors
He S., Feng S., Nag A., Afsarimanesh N., Han T., Mukhopadhyay S.C.
Sensors , 2020
374.
Tuneable 3D printed bioreactors for transaminations under continuous-flow
Peris E., Okafor O., Kulcinskaja E., Goodridge R., Luis S.V., Garcia-Verdugo E., O'Reilly E., Sans V.
Green Chemistry , 2017
375.
Green Chemistry in the Fine Chemicals and Pharmaceutical Industries
Ciriminna R., Pagliaro M.
Organic Process Research and Development , 2013
376.
Biocatalysis Using Immobilized Enzymes in Continuous Flow for the Synthesis of Fine Chemicals
Thompson M.P., Peñafiel I., Cosgrove S.C., Turner N.J.
Organic Process Research and Development , 2018
377.
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose R.R., Rodriguez M.J., Dixon T.A., Omenetto F., Kaplan D.L.
ACS Biomaterials Science and Engineering , 2016
378.
3D Printing/Bioprinting Based Tailoring of in Vitro Tissue Models: Recent Advances and Challenges
Mehrotra S., Moses J.C., Bandyopadhyay A., Mandal B.B.
ACS Applied Bio Materials , 2019
379.
Review: Bioprinting: A Beginning
Mironov V., Reis N., Derby B.
Tissue Engineering , 2006
380.
3D bioprinting for drug discovery and development in pharmaceutics
Peng W., Datta P., Ayan B., Ozbolat V., Sosnoski D., Ozbolat I.T.
Acta Biomaterialia , 2017
381.
Developments with 3D bioprinting for novel drug discovery
Satpathy A., Datta P., Wu Y., Ayan B., Bayram E., Ozbolat I.T.
Expert Opinion on Drug Discovery , 2018
382.
Can 4D bioprinting revolutionize drug development?
Lukin I., Musquiz S., Erezuma I., Al-Tel T.H., Golafshan N., Dolatshahi-Pirouz A., Orive G.
Expert Opinion on Drug Discovery , 2019
383.
rcr_89_12_1507bib383
Nguyen
PLoS ONE , 2016
384.
Bioprinted 3D vascularized tissue model for drug toxicity analysis.
Massa S., Sakr M.A., Seo J., Bandaru P., Arneri A., Bersini S., Zare-Eelanjegh E., Jalilian E., Cha B., Antona S., Enrico A., Gao Y., Hassan S., Acevedo J.P., Dokmeci M.R., et. al.
Biomicrofluidics , 2017
385.
3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling
Ma X., Liu J., Zhu W., Tang M., Lawrence N., Yu C., Gou M., Chen S.
Advanced Drug Delivery Reviews , 2018
386.
rcr_89_12_1507bib386
Koudan
Biotechnol. J. , 2020
388.
Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting*
Moldovan N.I., Hibino N., Nakayama K.
Tissue Engineering - Part B: Reviews , 2016
389.
Progress in scaffold‐free bioprinting for cardiovascular medicine
Moldovan N.I.
Journal of Cellular and Molecular Medicine , 2018
390.
A 3D printed microfluidic device for production of functionalized hydrogel microcapsules for culture and differentiation of human Neuronal Stem Cells (hNSC)
Alessandri K., Feyeux M., Gurchenkov B., Delgado C., Trushko A., Krause K., Vignjević D., Nassoy P., Roux A.
Lab on a Chip , 2016
392.
Polyhydroxyalkanoates: opening doors for a sustainable future
Li Z., Yang J., Loh X.J.
NPG Asia Materials , 2016
393.
Polyhydroxyalkanoates: Recent Advances in Their Synthesis and Applications
Winnacker M.
European Journal of Lipid Science and Technology , 2019
394.
A Straightforward Approach for 3D Bacterial Printing
Lehner B.A., Schmieden D.T., Meyer A.S.
ACS Synthetic Biology , 2017
395.
Additive manufactured customizable labware for biotechnological purposes
Raddatz L., de Vries I., Austerjost J., Lavrentieva A., Geier D., Becker T., Beutel S., Scheper T.
Engineering in Life Sciences , 2017
396.
Biomaterials-aided mandibular reconstruction using in vivo bioreactors
Tatara A.M., Koons G.L., Watson E., Piepergerdes T.C., Shah S.R., Smith B.T., Shum J., Melville J.C., Hanna I.A., Demian N., Ho T., Ratcliffe A., van den Beucken J.J., Jansen J.A., Wong M.E., et. al.
Proceedings of the National Academy of Sciences of the United States of America , 2019
397.
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross B.C., Erkal J.L., Lockwood S.Y., Chen C., Spence D.M.
Analytical Chemistry , 2014
398.
Printing@Clinic: From Medical Models to Organ Implants
Zhao H., Yang F., Fu J., Gao Q., Liu A., Sun M., He Y.
ACS Biomaterials Science and Engineering , 2017
400.
3D Printing of Porous Scaffolds with Controlled Porosity and Pore Size Values
Buj-Corral I., Bagheri A., Petit-Rojo O.
Materials , 2018
401.
rcr_89_12_1507bib401
Pirosa
Stem Cell Res. Therap. , 2018
402.
Engineering vascularized and innervated bone biomaterials for improved skeletal tissue regeneration
Marrella A., Lee T.Y., Lee D.H., Karuthedom S., Syla D., Chawla A., Khademhosseini A., Jang H.L.
Materials Today , 2018
403.
Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment
Kumar A., Mandal S., Barui S., Vasireddi R., Gbureck U., Gelinsky M., Basu B.
Materials Science and Engineering: R: Reports , 2016
404.
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova M.P., Chavali M.S.
Bioactive Materials , 2019
405.
3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution
Guo T., Holzberg T.R., Lim C.G., Gao F., Gargava A., Trachtenberg J.E., Mikos A.G., Fisher J.P.
Biofabrication , 2017
406.
rcr_89_12_1507bib406
Qu
RSC Adv. , 2019
407.
Preliminary Development of 3D-Printed Custom Substrata for Benthic Algal Biofilms
Kardel K., Carrano A.L., Blersch D.M., Kaur M.
3D Printing and Additive Manufacturing , 2016
408.
3D Printing with Nucleic Acid Adhesives
Allen P.B., Khaing Z., Schmidt C.E., Ellington A.D.
ACS Biomaterials Science and Engineering , 2014
409.
Dean Flow Dynamics in Low-Aspect Ratio Spiral Microchannels
Nivedita N., Ligrani P., Papautsky I.
Scientific Reports , 2017
410.
rcr_89_12_1507bib410
Kim
Anal. Chem. , 2014
412.
Mask-Directed Multiphoton Lithography
Kaehr B., Shear J.B.
Journal of the American Chemical Society , 2007
413.
3D printed drug delivery and testing systems — a passing fad or the future?
Lim S.H., Kathuria H., Tan J.J., Kang L.
Advanced Drug Delivery Reviews , 2018
414.
rcr_89_12_1507bib414
Park
J. Pharm. Invest. , 2019
415.
Dosage form designs for the controlled drug release of solid dispersions
Tran P.H., Tran T.T.
International Journal of Pharmaceutics , 2020
416.
Comparison of fused-filament fabrication to direct compression and injection molding in the manufacture of oral tablets
Fuenmayor E., Forde M., Healy A.V., Devine D.M., Lyons J.G., McConville C., Major I.
International Journal of Pharmaceutics , 2019
417.
Solid free-form fabrication of drug delivery devices
Wu B.M., Borland S.W., Giordano R.A., Cima L.G., Sachs E.M., Cima M.J.
Journal of Controlled Release , 1996
418.
Additively manufactured medical products – the FDA perspective
Di Prima M., Coburn J., Hwang D., Kelly J., Khairuzzaman A., Ricles L.
3D Printing in Medicine , 2016
419.
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman J., Madurawe R.D., Moore C.M., Khan M.A., Khairuzzaman A.
Advanced Drug Delivery Reviews , 2017
420.
Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective
Azad M.A., Olawuni D., Kimbell G., Badruddoza A.Z., Hossain M.S., Sultana T.
Pharmaceutics , 2020
421.
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Melocchi A., Parietti F., Loreti G., Maroni A., Gazzaniga A., Zema L.
Journal of Drug Delivery Science and Technology , 2015
422.
rcr_89_12_1507bib422
Polamaplly
Proc. Manuf. , 2019
423.
3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
Beck R.C., Chaves P.S., Goyanes A., Vukosavljevic B., Buanz A., Windbergs M., Basit A.W., Gaisford S.
International Journal of Pharmaceutics , 2017
424.
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz W., Szafraniec J., Kurek M., Jachowicz R.
Pharmaceutical Research , 2018
425.
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Melocchi A., Parietti F., Maroni A., Foppoli A., Gazzaniga A., Zema L.
International Journal of Pharmaceutics , 2016
426.
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Skowyra J., Pietrzak K., Alhnan M.A.
European Journal of Pharmaceutical Sciences , 2015
427.
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes A., Buanz A.B., Hatton G.B., Gaisford S., Basit A.W.
European Journal of Pharmaceutics and Biopharmaceutics , 2015
428.
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Goyanes A., Wang J., Buanz A., Martínez-Pacheco R., Telford R., Gaisford S., Basit A.W.
Molecular Pharmaceutics , 2015
431.
Melt extrusion with poorly soluble drugs - An integrated review.
Repka M.A., Bandari S., Kallakunta V.R., Vo A.Q., McFall H., Pimparade M.B., Bhagurkar A.M.
International Journal of Pharmaceutics , 2018
432.
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang J., Feng X., Patil H., Tiwari R.V., Repka M.A.
International Journal of Pharmaceutics , 2017
433.
rcr_89_12_1507bib433
Prasad
Addit. Manuf. , 2019
434.
Effect of plasticizers on manufacturing ritonavir/copovidone solid dispersions via hot-melt extrusion: Preformulation, physicochemical characterization, and pharmacokinetics in rats
Zhao Y., Xie X., Zhao Y., Gao Y., Cai C., Zhang Q., Ding Z., Fan Z., Zhang H., Liu M., Han J.
European Journal of Pharmaceutical Sciences , 2019
435.
Multi-purposable filaments of HPMC for 3D printing of medications with tailored drug release and timed-absorption
Kadry H., Al-Hilal T.A., Keshavarz A., Alam F., Xu C., Joy A., Ahsan F.
International Journal of Pharmaceutics , 2018
436.
3D printed capsules for quantitative regional absorption studies in the GI tract
Smith D., Kapoor Y., Hermans A., Nofsinger R., Kesisoglou F., Gustafson T.P., Procopio A.
International Journal of Pharmaceutics , 2018
437.
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
Maroni A., Melocchi A., Parietti F., Foppoli A., Zema L., Gazzaniga A.
Journal of Controlled Release , 2017
439.
Design and 3D printing of multi-compartmental PVA capsules for drug delivery
Matijašić G., Gretić M., Vinčić J., Poropat A., Cuculić L., Rahelić T.
Journal of Drug Delivery Science and Technology , 2019
440.
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Goyanes A., Chang H., Sedough D., Hatton G.B., Wang J., Buanz A., Gaisford S., Basit A.W.
International Journal of Pharmaceutics , 2015
441.
Modifying release characteristics from 3D printed drug-eluting products
Boetker J., Water J.J., Aho J., Arnfast L., Bohr A., Rantanen J.
European Journal of Pharmaceutical Sciences , 2016
442.
Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies
Khizer Z., Akram M.R., Sarfraz R.M., Nirwan J.S., Farhaj S., Yousaf M., Hussain T., Lou S., Timmins P., Conway B.R., Ghori M.U.
Polymers , 2019
444.
3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release
Yang Y., Wang H., Li H., Ou Z., Yang G.
European Journal of Pharmaceutical Sciences , 2018
445.
Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
Arafat B., Wojsz M., Isreb A., Forbes R.T., Isreb M., Ahmed W., Arafat T., Alhnan M.A.
European Journal of Pharmaceutical Sciences , 2018
446.
3D printing and coating to fabricate a hollow bullet-shaped implant with porous surface for controlled cytoxan release
Yang N., Chen H., Han H., Shen Y., Gu S., He Y., Guo S.
International Journal of Pharmaceutics , 2018
447.
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang J., Goyanes A., Gaisford S., Basit A.W.
International Journal of Pharmaceutics , 2016
448.
Additive Manufacturing of Personalized Pharmaceutical Dosage Forms via Stereolithography
Healy A.V., Fuenmayor E., Doran P., Geever L.M., Higginbotham C.L., Lyons J.G.
Pharmaceutics , 2019
449.
A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
Gioumouxouzis C.I., Baklavaridis A., Katsamenis O.L., Markopoulou C.K., Bouropoulos N., Tzetzis D., Fatouros D.G.
European Journal of Pharmaceutical Sciences , 2018
450.
Tailored on demand anti-coagulant dosing: An in vitro and in vivo evaluation of 3D printed purpose-designed oral dosage forms
Arafat B., Qinna N., Cieszynska M., Forbes R.T., Alhnan M.A.
European Journal of Pharmaceutics and Biopharmaceutics , 2018
451.
3D printing of tablets containing amorphous aripiprazole by filaments co-extrusion
Jamróz W., Kurek M., Czech A., Szafraniec J., Gawlak K., Jachowicz R.
European Journal of Pharmaceutics and Biopharmaceutics , 2018
452.
3D Printing of Pharmaceuticals and Drug Delivery Devices
Mathew E., Pitzanti G., Larrañeta E., Lamprou D.A.
Pharmaceutics , 2020
454.
rcr_89_12_1507bib454
456.
rcr_89_12_1507bib456
Ford
Addit. Manuf. , 2019
457.
Applications of 3D-Printing for Improving Chemistry Education
Pinger C.W., Geiger M.K., Spence D.M.
Journal of Chemical Education , 2019
458.
A pilot study assessing the value of 3D printed molecular modelling tools for pharmacy student education
Hall S., Grant G., Arora D., Karaksha A., McFarland A., Lohning A., Anoopkumar-Dukie S.
Currents in Pharmacy Teaching and Learning , 2017
460.
Mercury 4.0: from visualization to analysis, design and prediction
Macrae C.F., Sovago I., Cottrell S.J., Galek P.T., McCabe P., Pidcock E., Platings M., Shields G.P., Stevens J.S., Towler M., Wood P.A.
Journal of Applied Crystallography , 2020
461.
VMD: Visual molecular dynamics
Humphrey W., Dalke A., Schulten K.
Journal of Molecular Graphics , 1996
462.
UCSF Chimera?A visualization system for exploratory research and analysis
Pettersen E.F., Goddard T.D., Huang C.C., Couch G.S., Greenblatt D.M., Meng E.C., Ferrin T.E.
Journal of Computational Chemistry , 2004
465.
3D Printed Molecules and Extended Solid Models for Teaching Symmetry and Point Groups
Scalfani V.F., Vaid T.P.
Journal of Chemical Education , 2014
466.
Custom-Printed 3D Models for Teaching Molecular Symmetry
Niece B.K.
Journal of Chemical Education , 2019
468.
3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering
Rodenbough P.P., Vanti W.B., Chan S.
Journal of Chemical Education , 2015
469.
Molecular models
Chipman W.B.
Journal of Chemical Education , 1969
471.
Do-It-Yourself: 3D Models of Hydrogenic Orbitals through 3D Printing
Griffith K.M., Cataldo R.D., Fogarty K.H.
Journal of Chemical Education , 2016
472.
Illustrating Concepts in Physical Organic Chemistry with 3D Printed Orbitals
Robertson M.J., Jorgensen W.L.
Journal of Chemical Education , 2015
473.
Student Understanding of DNA Structure–Function Relationships Improves from Using 3D Learning Modules with Dynamic 3D Printed Models
Howell M.E., Booth C.S., Sikich S.M., Helikar T., Roston R.L., Couch B.A., Dijk K.
Biochemistry and Molecular Biology Education , 2019
474.
Flexible and modular 3D‐printed peptide models
Kerwin S.M.
Biochemistry and Molecular Biology Education , 2019
480.
Three-Dimensional Printing of a Scalable Molecular Model and Orbital Kit for Organic Chemistry Teaching and Learning
Penny M.R., Cao Z.J., Patel B., Sil dos Santos B., Asquith C.R., Szulc B.R., Rao Z.X., Muwaffak Z., Malkinson J.P., Hilton S.T.
Journal of Chemical Education , 2017
484.
Hands-On Hybridization: 3D-Printed Models of Hybrid Orbitals
de Cataldo R., Griffith K.M., Fogarty K.H.
Journal of Chemical Education , 2018
485.
rcr_89_12_1507bib485
Bakker
Concep. Magn. Reson., Part A , 2019
486.
Hands-On Data Analysis: Using 3D Printing To Visualize Reaction Progress Surfaces
Higman C.S., Situ H., Blacklin P., Hein J.E.
Journal of Chemical Education , 2017
487.
3D Printed Block Copolymer Nanostructures
Scalfani V.F., Turner C.H., Rupar P.A., Jenkins A.H., Bara J.E.
Journal of Chemical Education , 2015
488.
3D Printers Can Provide an Added Dimension for Teaching Structure–Energy Relationships
Blauch D.N., Carroll F.A.
Journal of Chemical Education , 2014
490.
Model of a potential energy surface
Dye J.L.
Journal of Chemical Education , 1957
491.
3D Printing of Molecular Potential Energy Surface Models
Lolur P., Dawes R.
Journal of Chemical Education , 2014
492.
3D Printed Potential and Free Energy Surfaces for Teaching Fundamental Concepts in Physical Chemistry
Kaliakin D.S., Zaari R.R., Varganov S.A.
Journal of Chemical Education , 2015
493.
Development and Application of 3D Printed Mesoreactors in Chemical Engineering Education
Tabassum T., Iloska M., Scuereb D., Taira N., Jin C., Zaitsev V., Afshar F., Kim T.
Journal of Chemical Education , 2018
494.
3D-Printed Microfluidics for Hands-On Undergraduate Laboratory Experiments
Vangunten M.T., Walker U.J., Do H.G., Knust K.N.
Journal of Chemical Education , 2019
495.
User-Friendly 3D Printed Colorimeter Models for Student Exploration of Instrument Design and Performance
Porter L.A., Washer B.M., Hakim M.H., Dallinger R.F.
Journal of Chemical Education , 2016
496.
Low-Cost 3D-Printed Polarimeter
Bernard P., Mendez J.D.
Journal of Chemical Education , 2020
497.
Three-Dimensional Printing of a Model Atomic Force Microscope to Measure Force–Distance Profiles
Gruber D.M., Perez T., Layug B.Q., Ohama M., Tran L., Rojas L.A., Garcia A.X., Liu G., Miller W.J.
Journal of Chemical Education , 2020