Home / Articles / Polymers for the future

Polymers for the future

Ol'ga Vladimirovna Arzhakova 1, 
Ol'ga Vladimirovna Arzhakova
Maxim Sergeevich Arzhakov 1, 
Maxim Sergeevich Arzhakov
Elmira Rashatovna Badamshina 2, 
Elmira Rashatovna Badamshina
Evgeny Viktorovich Bryuzgin 3, 
Evgeny Viktorovich Bryuzgin
Ekaterina Borisovna Bryuzgina 3, 
Ekaterina Borisovna Bryuzgina
Aleksandra Valer'evna Bystrova 4, 5, 
Aleksandra Valer'evna Bystrova
Gleb Vyacheslavovich Vaganov 6, 
Gleb Vyacheslavovich Vaganov
Valentina Vladimirovna Vasilevskaya 1, 4, 
Valentina Vladimirovna Vasilevskaya
Artem Yur'evich Vdovichenko 5, 
Artem Yur'evich Vdovichenko
Marat Olegovich Gallyamov 4, 7, 
Marat Olegovich Gallyamov
Rustam Anrikovich Gumerov 4, 7, 
Rustam Anrikovich Gumerov
Andrey Leonidovich Didenko 6, 
Andrey Leonidovich Didenko
Vadim Viktorovich Zefirov 4, 
Vadim Viktorovich Zefirov
Sergei Vitalevich Karpov 2, 
Sergei Vitalevich Karpov
Pavel Vyacheslavovich Komarov 4, 
Pavel Vyacheslavovich Komarov
Valerii Grigor'evich Kulichikhin 8, 
Valerii Grigor'evich Kulichikhin
Sergei Aleksandrovich Kurochkin 2, 
Sergei Aleksandrovich Kurochkin
Sergey Vladimirovich Larin 6, 
Sergey Vladimirovich Larin
Aleksandr Yakovlevich Malkin 8, 
Aleksandr Yakovlevich Malkin
Sergey Alexandrovich Milenin 5, 
Sergey Alexandrovich Milenin
Aziz Mansurovich Muzafarov 4, 5, 
Aziz Mansurovich Muzafarov
Vyacheslav Sergeevich Molchanov 7, 
Vyacheslav Sergeevich Molchanov
Alexander Valentinovich Navrotskiy 3, 
Alexander Valentinovich Navrotskiy
Ivan Aleksandrovich Novakov 3, 
Ivan Aleksandrovich Novakov
Evgenii Fedorovich Panarin 6, 
Evgenii Fedorovich Panarin
Irina Gennad'evna Panova 1, 
Irina Gennad'evna Panova
Igor Ivanovich Potemkin 4, 7, 
Igor Ivanovich Potemkin
Valentin Mikailovich Svetlichnyi 6, 
Valentin Mikailovich Svetlichnyi
Nikita Gennadievich Sedush 5, 
Nikita Gennadievich Sedush
Olga Anatolyevna Serenko 4, 
Olga Anatolyevna Serenko
Sergey Alekseevich Uspenskii 5, 
Sergey Alekseevich Uspenskii
Ol'ga Evgen'evna Philippova 7, 
Ol'ga Evgen'evna Philippova
Alexei Removich Khokhlov 4, 7, 
Alexei Removich Khokhlov
Sergei Nikolaevich Chvalun 5, 
Sergei Nikolaevich Chvalun
Sergei Stanislavovich Sheiko 6, 
Sergei Stanislavovich Sheiko
Andrey Vladimirovich Shibaev 7, 
Andrey Vladimirovich Shibaev
Igor Vladimirovich Elmanovich 4, 
Igor Vladimirovich Elmanovich
Vladimir Evgen'evich Yudin 6, 
Vladimir Evgen'evich Yudin
Aleksandr Vadimovich Yakimanskii 6, 
Aleksandr Vadimovich Yakimanskii
Aleksandr Anatol'evich Yaroslavov 1
Aleksandr Anatol'evich Yaroslavov
2 Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry, Russian Academy of Sciences, Chernogolovka, Moscow region
3 olgograd State Technical University, Volgograd, Russian Federation
4 A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences, Moscow
6 Institute of Macromolecular Compounds, Russian Academy of Sciences, Saint Petersburg, Russian Federation
7 Faculty of Physics, Lomonosov Moscow State University
8 A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, Moscow, Russian Federation
Published 30 November 2021
Communication , Volume 91, Issue 12
52
Cite this
GOST
 | 
Cite this
GOST
Arzhakova O. V. et al. Polymers for the future // Russian Chemical Reviews. 2022. Vol. 91. No. 12.
GOST all authors (up to 50)
Arzhakova O. V., Arzhakov M. S., Badamshina E. R., Bryuzgin E. V., Bryuzgina E. B., Bystrova A. V., Vaganov G. V., Vasilevskaya V. V., Vdovichenko A. Y., Gallyamov M. O., Gumerov R. A., Didenko A. L., Zefirov V. V., Karpov S. V., Komarov P. V., Kulichikhin V. G., Kurochkin S. A., Larin S. V., Malkin A. Y., Milenin S. A., Muzafarov A. M., Molchanov V. S., Navrotskiy A. V., Novakov I. A., Panarin E. F., Panova I. G., Potemkin I. I., Svetlichnyi V. M., Sedush N. G., Serenko O. A., Uspenskii S. A., Philippova O. E., Khokhlov A. R., Chvalun S. N., Sheiko S. S., Shibaev A. V., Elmanovich I. V., Yudin V. E., Yakimanskii A. V., Yaroslavov A. A. Polymers for the future // Russian Chemical Reviews. 2022. Vol. 91. No. 12.
RIS
 | 
Cite this
RIS
TY - JOUR
DO - 10.57634/RCR5062
UR - https://rcr.colab.ws/publications/10.57634/RCR5062
TI - Polymers for the future
T2 - Russian Chemical Reviews
AU - Arzhakova, Ol'ga Vladimirovna
AU - Arzhakov, Maxim Sergeevich
AU - Badamshina, Elmira Rashatovna
AU - Bryuzgin, Evgeny Viktorovich
AU - Bryuzgina, Ekaterina Borisovna
AU - Bystrova, Aleksandra Valer'evna
AU - Vaganov, Gleb Vyacheslavovich
AU - Vasilevskaya, Valentina Vladimirovna
AU - Vdovichenko, Artem Yur'evich
AU - Gallyamov, Marat Olegovich
AU - Gumerov, Rustam Anrikovich
AU - Didenko, Andrey Leonidovich
AU - Zefirov, Vadim Viktorovich
AU - Karpov, Sergei Vitalevich
AU - Komarov, Pavel Vyacheslavovich
AU - Kulichikhin, Valerii Grigor'evich
AU - Kurochkin, Sergei Aleksandrovich
AU - Larin, Sergey Vladimirovich
AU - Malkin, Aleksandr Yakovlevich
AU - Milenin, Sergey Alexandrovich
AU - Muzafarov, Aziz Mansurovich
AU - Molchanov, Vyacheslav Sergeevich
AU - Navrotskiy, Alexander Valentinovich
AU - Novakov, Ivan Aleksandrovich
AU - Panarin, Evgenii Fedorovich
AU - Panova, Irina Gennad'evna
AU - Potemkin, Igor Ivanovich
AU - Svetlichnyi, Valentin Mikailovich
AU - Sedush, Nikita Gennadievich
AU - Serenko, Olga Anatolyevna
AU - Uspenskii, Sergey Alekseevich
AU - Philippova, Ol'ga Evgen'evna
AU - Khokhlov, Alexei Removich
AU - Chvalun, Sergei Nikolaevich
AU - Sheiko, Sergei Stanislavovich
AU - Shibaev, Andrey Vladimirovich
AU - Elmanovich, Igor Vladimirovich
AU - Yudin, Vladimir Evgen'evich
AU - Yakimanskii, Aleksandr Vadimovich
AU - Yaroslavov, Aleksandr Anatol'evich
PY - 2022
DA - 2021/11/30
PB - ANO Editorial Board of the journal Uspekhi Khimii
IS - 12
VL - 91
ER -
BibTex
Cite this
BibTex (up to 50 authors)
@article{2022_Arzhakova,
author = {Ol'ga Vladimirovna Arzhakova and Maxim Sergeevich Arzhakov and Elmira Rashatovna Badamshina and Evgeny Viktorovich Bryuzgin and Ekaterina Borisovna Bryuzgina and Aleksandra Valer'evna Bystrova and Gleb Vyacheslavovich Vaganov and Valentina Vladimirovna Vasilevskaya and Artem Yur'evich Vdovichenko and Marat Olegovich Gallyamov and Rustam Anrikovich Gumerov and Andrey Leonidovich Didenko and Vadim Viktorovich Zefirov and Sergei Vitalevich Karpov and Pavel Vyacheslavovich Komarov and Valerii Grigor'evich Kulichikhin and Sergei Aleksandrovich Kurochkin and Sergey Vladimirovich Larin and Aleksandr Yakovlevich Malkin and Sergey Alexandrovich Milenin and Aziz Mansurovich Muzafarov and Vyacheslav Sergeevich Molchanov and Alexander Valentinovich Navrotskiy and Ivan Aleksandrovich Novakov and Evgenii Fedorovich Panarin and Irina Gennad'evna Panova and Igor Ivanovich Potemkin and Valentin Mikailovich Svetlichnyi and Nikita Gennadievich Sedush and Olga Anatolyevna Serenko and Sergey Alekseevich Uspenskii and Ol'ga Evgen'evna Philippova and Alexei Removich Khokhlov and Sergei Nikolaevich Chvalun and Sergei Stanislavovich Sheiko and Andrey Vladimirovich Shibaev and Igor Vladimirovich Elmanovich and Vladimir Evgen'evich Yudin and Aleksandr Vadimovich Yakimanskii and Aleksandr Anatol'evich Yaroslavov},
title = {Polymers for the future},
journal = {Russian Chemical Reviews},
year = {2022},
volume = {91},
publisher = {ANO Editorial Board of the journal Uspekhi Khimii},
month = {Nov},
url = {https://rcr.colab.ws/publications/10.57634/RCR5062},
number = {12},
doi = {10.57634/RCR5062}
}
Views / Downloads
63 / 28

Abstract

The main challenge of modern polymer science is to search for ways of further development of polymer civilization, which obviously includes living organisms on the Earth, without harmful consequences for civilization and the planet in its entirety. The review considers approaches to handle the problem of environmental accumulation of plastic waste. Promising trends in the development of polymer technologies, which can significantly reduce the amount of waste produced, are highlighted. Separate Sections address original methods of additive manufacturing technologies, such as the extrusion printing technique to produce multilayer films, 3D printing by using high-temperature polyimide materials, new functional siloxane oligomers and hydrogels for medical uses. Much attention is paid to the development and applications of biodegradable materials in medicine, packaging industry and agriculture. An analysis of the European strategy for plastics and plastic disposal demonstrates that it has a number of limitations due to high energy requirements and changes in Earth's carbon balance. The modern approach to plastic waste management free from these shortcomings is briefly outlined.
Bibliography — 1233 references.

Keywords

3D printing
additive polymer technologies
functional polysiloxane oligomers
metastable polymeric materials
microgels
multi-extruder technologies
multilayer polymer films and fibers
natural polymers
polyelectrolyte complexes
polymer brushes
polymer gels
processing of polymers in sc-CO2
recycling of polymer waste

Funders

Ministry of Education and Science of the Russian Federation
075-15-2020-794

References

1.
Polymer Mysteries of Chemical Physics
Berlin A.A.
Polymer Science - Series C , 2021
2.
Micro- and nano-layered processing of new polymeric systems
Li Z., Olah A., Baer E.
Progress in Polymer Science , 2020
3.
Cylindrical molecular brushes: Synthesis, characterization, and properties
Sheiko S.S., Sumerlin B.S., Matyjaszewski K.
Progress in Polymer Science , 2008
4.
Stimuli-responsive molecular brushes
Lee H., Pietrasik J., Sheiko S.S., Matyjaszewski K.
Progress in Polymer Science , 2010
6.
Molecular Brushes
Yuan J., Müller A.H., Matyjaszewski K., Sheiko S.S.
2012
7.
Structure, function, self-assembly, and applications of bottlebrush copolymers
Verduzco R., Li X., Pesek S.L., Stein G.E.
Chemical Society Reviews , 2015
8.
Application of Bottlebrush Block Copolymers as Photonic Crystals
Liberman‐Martin A.L., Chu C.K., Grubbs R.H.
Macromolecular Rapid Communications , 2017
9.
Molecular Bottlebrushes as Novel Materials
Xie G., Martinez M.R., Olszewski M., Sheiko S.S., Matyjaszewski K.
Biomacromolecules , 2018
10.
Brush Architecture and Network Elasticity: Path to the Design of Mechanically Diverse Elastomers
Maw M., Morgan B.J., Dashtimoghadam E., Tian Y., Bersenev E.A., Maryasevskaya A.V., Ivanov D.A., Matyjaszewski K., Dobrynin A.V., Sheiko S.S.
Macromolecules , 2022
11.
Solvent-free, supersoft and superelastic bottlebrush melts and networks
Daniel W.F., Burdyńska J., Vatankhah-Varnoosfaderani M., Matyjaszewski K., Paturej J., Rubinstein M., Dobrynin A.V., Sheiko S.S.
Nature Materials , 2015
12.
Mimicking biological stress–strain behaviour with synthetic elastomers
Vatankhah-Varnosfaderani M., Daniel W.F., Everhart M.H., Pandya A.A., Liang H., Matyjaszewski K., Dobrynin A.V., Sheiko S.S.
Nature , 2017
13.
Independently Tuning Elastomer Softness and Firmness by Incorporating Side Chain Mixtures into Bottlebrush Network Strands
Keith A.N., Clair C., Lallam A., Bersenev E.A., Ivanov D.A., Tian Y., Dobrynin A.V., Sheiko S.S.
Macromolecules , 2020
14.
Super-soft solvent-free bottlebrush elastomers for touch sensing
Reynolds V.G., Mukherjee S., Xie R., Levi A.E., Atassi A., Uchiyama T., Wang H., Chabinyc M.L., Bates C.M.
Materials Horizons , 2020
15.
Tissue‐Adaptive Materials with Independently Regulated Modulus and Transition Temperature
Zhang D., Dashtimoghadam E., Fahimipour F., Hu X., Li Q., Bersenev E.A., Ivanov D.A., Vatankhah‐Varnoosfaderani M., Sheiko S.S.
Advanced Materials , 2020
16.
Mechanically Diverse Gels with Equal Solvent Content
Sheiko S.S., Vashahi F., Morgan B.J., Maw M., Dashtimoghadam E., Fahimipour F., Jacobs M., Keith A.N., Vatankhah-Varnosfaderani M., Dobrynin A.V.
ACS Central Science , 2022
17.
Chameleon-like elastomers with molecularly encoded strain-adaptive stiffening and coloration
Vatankhah-Varnosfaderani M., Keith A.N., Cong Y., Liang H., Rosenthal M., Sztucki M., Clair C., Magonov S., Ivanov D.A., Dobrynin A.V., Sheiko S.S.
Science , 2018
18.
Encoding tissue mechanics in silicone
Sheiko S.S., Everhart M.H., Dobrynin A.V., Vatankhah-Varnosfaderani M.
Science Robotics , 2018
19.
Bottlebrush Bridge between Soft Gels and Firm Tissues
Keith A.N., Vatankhah-Varnosfaderani M., Clair C., Fahimipour F., Dashtimoghadam E., Lallam A., Sztucki M., Ivanov D.A., Liang H., Dobrynin A.V., Sheiko S.S.
ACS Central Science , 2020
20.
Injectable non-leaching tissue-mimetic bottlebrush elastomers as an advanced platform for reconstructive surgery
Dashtimoghadam E., Fahimipour F., Keith A.N., Vashahi F., Popryadukhin P., Vatankhah-Varnosfaderani M., Sheiko S.S.
Nature Communications , 2021
22.
Dynamic Bottlebrush Polymer Networks: Self-Healing in Super-Soft Materials
Self J.L., Sample C.S., Levi A.E., Li K., Xie R., de Alaniz J.R., Bates C.M.
Journal of the American Chemical Society , 2020
23.
Injectable bottlebrush hydrogels with tissue-mimetic mechanical properties
Vashahi F., Martinez M.R., Dashtimoghadam E., Fahimipour F., Keith A.N., Bersenev E.A., Ivanov D.A., Zhulina E.B., Popryadukhin P., Matyjaszewski K., Vatankhah-Varnosfaderani M., Sheiko S.S.
Science advances , 2022
24.
Room temperature 3D printing of super-soft and solvent-free elastomers
Xie R., Mukherjee S., Levi A.E., Reynolds V.G., Wang H., Chabinyc M.L., Bates C.M.
Science advances , 2020
26.
Synthesis of degradable molecular brushes via a combination of ring-opening polymerization and click chemistry
Shi Y., Wang X., Graff R.W., Phillip W.A., Gao H.
Journal of Polymer Science, Part A: Polymer Chemistry , 2014
27.
Diphilic Macromolecular Brushes with a Polyimide Backbone and Poly(methacrylic acid) Blocks in Side Chains
Meleshko T.K., Ivanov I.V., Kashina A.V., Bogorad N.N., Simonova M.A., Zakharova N.V., Filippov A.P., Yakimansky A.V.
Polymer Science - Series B , 2018
28.
Chromatographic Analysis of Structural Elements of Molecular Polyimide Brushes with Polymethacrylate Side Chains
Litvinova L.S., Kashina A.V., Meleshko T.K., Yakimansky A.V.
International Journal of Polymer Analysis and Characterization , 2015
29.
Novel regular polyimide-graft -(polymethacrylic acid) brushes: Synthesis and possible applications as nanocontainers of cyanoporphyrazine agents for photodynamic therapy
Yakimansky A.V., Meleshko T.K., Ilgach D.M., Bauman M.A., Anan'eva T.D., Klapshina L.G., Lermontova S.A., Balalaeva I.V., Douglas W.E.
Journal of Polymer Science, Part A: Polymer Chemistry , 2013
30.
Synthesis and Solution Properties of Loose Polymer Brushes Having Polyimide Backbone and Methylmethacrylate Side Chains
Krasova A., Belyaeva E., Tarabukina E., Filippov A., Meleshko T., Ilgach D., Bogorad N., Yakimansky A.
Macromolecular Symposia , 2012
31.
Amphiphilic multicomponent molecular brushes
Ivanov I.V., Meleshko T.K., Kashina A.V., Yakimansky A.V.
Russian Chemical Reviews , 2019
32.
Modulating the Depolymerization of Self-Immolative Brush Polymers with Poly(benzyl ether) Backbones
Xiao Y., Li H., Zhang B., Cheng Z., Li Y., Tan X., Zhang K.
Macromolecules , 2018
33.
Depolymerization of Bottlebrush Polypentenamers and Their Macromolecular Metamorphosis
Neary W.J., Isais T.A., Kennemur J.G.
Journal of the American Chemical Society , 2019
34.
Thermal Degradation of Adsorbed Bottle-Brush Macromolecules: When Do Strong Covalent Bonds Break Easily?
Paturej J., Kuban L., Milchev A., Rostiashvili V.G., Vilgis T.A.
Macromolecular Symposia , 2012
35.
Focusing bond tension in bottle-brush macromolecules during spreading
Park I., Nese A., Pietrasik J., Matyjaszewski K., Sheiko S.S.
Journal of Materials Chemistry A , 2011
36.
Thermal Degradation of Adsorbed Bottle-Brush Macromolecules: A Molecular Dynamics Simulation
Milchev A., Paturej J., Rostiashvili V.G., Vilgis T.A.
Macromolecules , 2011
37.
“Fatal Adsorption” of Brushlike Macromolecules:  High Sensitivity of C−C Bond Cleavage Rates to Substrate Surface Energy
Lebedeva N.V., Sun F.C., Lee H., Matyjaszewski K., Sheiko S.S.
Journal of the American Chemical Society , 2008
38.
Molecular Design of Liquid Crystalline Brush-Like Block Copolymers for Magnetic Field Directed Self-Assembly: A Platform for Functional Materials
Deshmukh P., Gopinadhan M., Choo Y., Ahn S., Majewski P.W., Yoon S.Y., Bakajin O., Elimelech M., Osuji C.O., Kasi R.M.
ACS Macro Letters , 2014
39.
A global sustainability perspective on 3D printing technologies
Gebler M., Schoot Uiterkamp A.J., Visser C.
Energy Policy , 2014
40.
Framework for Life Cycle Sustainability Assessment of Additive Manufacturing
Ribeiro, Matos, Jacinto, Salman, Cardeal, Carvalho, Godina, Peças
Sustainability , 2020
42.
Patent US 3051453 (1962)
43.
Compact Mixing Using Multiple Splitting, Stretching, and Recombining Flows
Neerincx P.E., Denteneer R.P., Peelen S., Meijer H.E.
Macromolecular Materials and Engineering , 2011
44.
Topologic mixing on a microfluidic chip
Chen H., Meiners J.
Applied Physics Letters , 2004
45.
One‐step creation of hierarchical fractal structures
Neerincx P.E., Hofmann M., Gorodetskyi O., Feldman K., Vermant J., Meijer H.E.
Polymer Engineering and Science , 2021
46.
Fractal Structuring in Polymer Processing
Neerincx P.E., Meijer H.E.
Macromolecular Chemistry and Physics , 2012
47.
Hierarchical and Fractal Structuring in Polymer Processing
Schaller R., Neerincx P.E., Meijer H.E.
Macromolecular Materials and Engineering , 2017
49.
Layered polymer GRIN lenses and their benefits to optical designs
Boyd A., Ponting M., Fein H.
Advanced Optical Technologies , 2015
50.
Roll-to-Roll Fabrication of Multilayer Films for High Capacity Optical Data Storage
Ryan C., Christenson C.W., Valle B., Saini A., Lott J., Johnson J., Schiraldi D., Weder C., Baer E., Singer K.D., Shan J.
Advanced Materials , 2012
51.
Polymeric One-Dimensional Photonic Crystals by Continuous Coextrusion
Kazmierczak T., Song H., Hiltner A., Baer E.
Macromolecular Rapid Communications , 2007
52.
Co-extruded mechanically tunable multilayer elastomer laser
Mao G., Andrews J., Crescimanno M., Singer K.D., Baer E., Hiltner A., Song H., Shakya B.
Optical Materials Express , 2011
53.
S.N.Dhoot, B.D.Freeman, M.E.Stewart. In Encycl. Polym. Sci. Technol. (Hoboken, NJ, USA: John Wiley & Sons, Inc., 2002). P. 198
54.
Confined crystallization in polymer nanolayered films: A review
Carr J.M., Langhe D.S., Ponting M.T., Hiltner A., Baer E.
Journal of Materials Research , 2012
55.
Confined Crystallization of Polyethylene Oxide in Nanolayer Assemblies
Wang H., Keum J.K., Hiltner A., Baer E., Freeman B., Rozanski A., Galeski A.
Science , 2009
56.
Impact of Nanoconfinement on Polylactide Crystallization and Gas Barrier Properties
Fernandes Nassar S., Delpouve N., Sollogoub C., Guinault A., Stoclet G., Régnier G., Domenek S.
ACS applied materials & interfaces , 2020
60.
Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances
Messin T., Marais S., Follain N., Guinault A., Gaucher V., Delpouve N., Sollogoub C.
Journal of Membrane Science , 2020
61.
Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties
62.
Confinement effect in PC/MXD6 multilayer films: Impact of the microlayered structure on water and gas barrier properties
Messin T., Follain N., Guinault A., Miquelard-Garnier G., Sollogoub C., Delpouve N., Gaucher V., Marais S.
Journal of Membrane Science , 2017
63.
Forced assembly by multilayer coextrusion to create oriented graphene reinforced polymer nanocomposites
Li X., McKenna G.B., Miquelard-Garnier G., Guinault A., Sollogoub C., Regnier G., Rozanski A.
Polymer , 2014
65.
Interfacial Diffusion and Bonding in Multilayer Polymer Films: A Molecular Dynamics Simulation
Shi M., Zhang Y., Cheng L., Jiao Z., Yang W., Tan J., Ding Y.
Journal of Physical Chemistry B , 2016
66.
Enhanced Dynamics of Confined Polymers near the Immiscible Polymer–Polymer Interface: Neutron Reflectivity Studies
Jo K., Oh Y., Sung B.J., Kim T., Um M.S., Choi W.J., Bang J., Yuan G., Satija S.K., Koo J.
ACS Macro Letters , 2020
67.
Polymer Interphase Materials by Forced Assembly
Liu R.Y., Bernal-Lara T.E., Hiltner A., Baer E.
Macromolecules , 2005
68.
Unveiling the Effects of In Situ Layer–Layer Interfacial Reaction in Multilayer Polymer Films via Multilayered Assembly: From Microlayers to Nanolayers
Lu B., Alcouffe P., Sudre G., Pruvost S., Serghei A., Liu C., Maazouz A., Lamnawar K.
Macromolecular Materials and Engineering , 2020
69.
Crystallization Kinetics of Poly(ethylene oxide) in Confined Nanolayers
Wang H., Keum J.K., Hiltner A., Baer E.
Macromolecules , 2010
72.
Breakup behavior of nanolayers in polymeric multilayer systems — Creation of nanosheets and nanodroplets
Feng J., Zhang Z., Bironeau A., Guinault A., Miquelard-Garnier G., Sollogoub C., Olah A., Baer E.
Polymer , 2018
75.
Strengthening of a Polymer Interface:  Interdiffusion and Cross-Linking
Aradian A., Raphaël E., de Gennes P.-.
Macromolecules , 2000
76.
P.-G.de Gennes. C.R.Seances Acad. Sci, Ser. B, 291, 219 (1980)
78.
Recycling of Polymer-Based Multilayer Packaging: A Review
Kaiser K., Schmid M., Schlummer M.
Recycling , 2017
79.
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro R., Maio A., Sutera F., Gulino E., Morreale M.
Polymers , 2019
80.
Biodegradation of Wasted Bioplastics in Natural and Industrial Environments: A Review
Folino A., Karageorgiou A., Calabrò P.S., Komilis D.
Sustainability , 2020
82.
On the Data-Driven Modeling of Reactive Extrusion
Ibañez R., Casteran F., Argerich C., Ghnatios C., Hascoet N., Ammar A., Cassagnau P., Chinesta F.
Fluids , 2020
83.
Benefit of the Reactive Extrusion in the Course of Polyhydroxyurethanes Synthesis by Aminolysis of Cyclic Carbonates
Magliozzi F., Chollet G., Grau E., Cramail H.
ACS Sustainable Chemistry and Engineering , 2019
84.
Recycling of PET
Awaja F., Pavel D.
European Polymer Journal , 2005
86.
Experimental and modelling aspects of the reactive extrusion process
Cassagnau P., Bounor-Legaré V., Vergnes B.
Mechanics and Industry , 2020
89.
Bicomponent flow of molten polymers in annular dies of extruders
Malkin A.Y., Friedman M.L., Vachaghin K.D., Vinogradov G.V.
Journal of Applied Polymer Science , 1975
90.
Mathematical modelling of stratified flow of polymer melts in an axisymmetric formulation
91.
Anderson P.D., Dooley J., Meijer H.E.
Applied Rheology , 2006
92.
Plane Poiseuille Flow of Two Compatible Polymers: Influence of the Interphase on the Flow Stability
Rousset F., Bourgin P., Palade L.
Journal of Fluids Engineering, Transactions of the ASME , 2005
94.
Slip at the interface between immiscible polymer melts I: method to measure slip
Komuro R., Sukumaran S.K., Sugimoto M., Koyama K.
Rheologica Acta , 2013
95.
G.C.Tzeng, R.H.Chen. Adv. Mater. Process. Technol., 3, 52 (2017)
97.
Process for a Reactive Monomer Alignment Layer for Liquid Crystals Formed on an Azodye Sublayer
Wang J., McGinty C., Reich R., Finnemeyer V., Clark H., Berry S., Bos P.
Materials , 2018
98.
Mesophase polymers in the coming decade: problems and trends
Platé N.A., Kulichikhin V.G., Talroze R.V.
Pure and Applied Chemistry , 1991
99.
Rheology and morphology of polymer blends containing liquid-crystalline component in melt and solid state
Kulichikhin V.G., Vasil'Eva O.V., Litvinov I.A., Antipov E.M., Parsamyan I.L., Platé N.A.
Journal of Applied Polymer Science , 1991
102.
Shear banding in semidilute entangled polymer solutions
Germann N.
Current Opinion in Colloid and Interface Science , 2019
103.
Shear banding in entangled polymers in the micron scale gap: a confocal-rheoscopic study
Boukany P.E., Wang S., Ravindranath S., Lee L.J.
Soft Matter , 2015
106.
V.G.Kulichikhin, E.P.Plotnikova, A.K.Tereshin, A.V.Subbotin, L.A.Tsamalashvili. Polym. Sci. Ser. C, 42, 129 (2000)
107.
A.S.Lodge Elastic Liquids. (London: Academic Press, 1964)
108.
Rheology and morphology of polymer blends in melt and solid state
Kulichikhin V.G., Vasil'eva O.V., Litvinov I.A., Parsamyan I.L., Platá N.A.
Makromolekulare Chemie Macromolecular Symposia , 1990
109.
Specific rheology - morphology relationships for some blends containing LCPs
Kulichikhin V., Plotnikova E., Subbotin A., Platé N.
Rheologica Acta , 2001
111.
S.Lerouge, J.-F.Berret. In Adv. Polym. Sci. Springer, Berlin, Heidelberg, 2009. P. 1
113.
Unusual rheological effects observed in polyacrylonitrile solutions
Ilyin S.O., Kulichikhin V.G., Malkin A.Y.
Polymer Science - Series A , 2013
114.
Shear banding in polymer solutions
Cromer M., Villet M.C., Fredrickson G.H., Leal L.G.
Physics of Fluids , 2013
115.
Shear Banding of Complex Fluids
Divoux T., Fardin M.A., Manneville S., Lerouge S.
Annual Review of Fluid Mechanics , 2016
116.
Rheo-NMR of transient and steady state shear banding under shear startup
Al-kaby R.N., Jayaratne J.S., Brox T.I., Codd S.L., Seymour J.D., Brown J.R.
Journal of Rheology , 2018
117.
Criteria for Shear Banding in Time-Dependent Flows of Complex Fluids
119.
V.V.Danilenko. Sintez i Spekanie Almaza Vzryvom. (Synthesis and Sintering of Diamonds by Explosion). (Energoatomizdat, 2003)
120.
A.S.Simakov. Doctoral Thesis in Physics and Mathematics, Institute of Chemical Physics, Russia Academy of Sciences, Moscow, 2011
121.
Preparation of Polymer-Nanodiamond Composites with Improved Properties
Karbushev V.V., Konstantinov I.I., Parsamyan I.L., Kulichikhin V.G., Popov V.A., George T.F.
Advanced Materials Research , 2008
122.
Self-assembly and elastic instability in polymer flows
Semakov A.V., Kulichikhin V.G.
Polymer Science - Series A , 2009
123.
Self-Organization of Polymeric Fluids in Strong Stress Fields
Semakov A.V., Kulichikhin V.G., Malkin A.Y.
Advances in Condensed Matter Physics , 2015
124.
Entanglement junctions in melts and concentrated solutions of flexible-chain polymers: Macromodeling
125.
Shear-induced transitions in colloidal and polymeric liquids
Malkin A.Y.
Advances in Colloid and Interface Science , 2021
126.
Rheological properties of anisotropic poly(para‐benzamide) solutions
Papkov S.P., Kulichikhin V.G., Kalmykova V.D., Malkin A.Y.
Journal of Polymer Science Part C: Polymer Letters , 1974
127.
Scalable Synthesis of Switchable Assemblies of Gold Nanorod Lyotropic Liquid Crystal Nanocomposites
Liu X., Qi G., Park A.M., Rodriguez‐Gonzalez A., Enotiadis A., Pan W., Kosma V., Fuchs G.D., Kirby B.J., Giannelis E.P.
Small , 2019
128.
Shear-induced liquid-crystalline phase transition behaviour of colloidal solutions of hydroxyapatite nanorod composites
Kajiyama S., Iwase H., Nakayama M., Ichikawa R., Yamaguchi D., Seto H., Kato T.
Nanoscale , 2020
129.
Unexpected rheological behavior of solutions of aromatic polyamide in transient physical states
Malkin A.Y., Kulichikhin V.G., Polyakova M.Y., Zuev K.V., Govorov V.A.
Physics of Fluids , 2020
130.
Mineral liquid crystalline polymers
Davidson P., Batail P., Gabriel J.C., Livage J., Sanchez C., Bourgaux C.
Progress in Polymer Science , 1997
131.
Rheology–Structure Interrelationships of Hydroxypropylcellulose Liquid Crystal Solutions and Their Nanocomposites under Flow
Makarova V.V., Tolstykh M.Y., Picken S.J., Mendes E., Kulichikhin V.G.
Macromolecules , 2013
133.
Gibson I., Rosen D., Stucker B.
2014
135.
A review on voids of 3D printed parts by fused filament fabrication
Tao Y., Kong F., Li Z., Zhang J., Zhao X., Yin Q., Xing D., Li P.
Journal of Materials Research and Technology , 2021
136.
Investigation of Properties of Nanocomposite Polyimide Samples Obtained by Fused Deposition Modeling
Polyakov I.V., Vaganov G.V., Yudin V.E., Ivan’kova E.M., Popova E.N., Elokhovskii V.Y.
Mechanics of Composite Materials , 2018
139.
Methods for quantifying the stable sintering region in laser sintered polyamide-12
Vasquez M., Haworth B., Hopkinson N.
Polymer Engineering and Science , 2012
141.
Laser sintering of polyamides and other polymers
Goodridge R.D., Tuck C.J., Hague R.J.
Progress in Materials Science , 2012
142.
Flame-retardant Polyamide 11 and 12 Nanocomposites: Processing, Morphology, and Mechanical Properties
Lao S.C., Yong W., Nguyen K., Moon T.J., Koo J.H., Pilato L., Wissler G.
Journal of Composite Materials , 2010
143.
Melting process and mechanics on laser sintering of single layer polyamide 6 powder
Zhou W., Wang X., Hu J., Zhu X.
International Journal of Advanced Manufacturing Technology , 2013
144.
Experimental investigation into the selective laser sintering of high-impact polystyrene
Shi Y., Wang Y., Chen J., Huang S.
Journal of Applied Polymer Science , 2008
145.
Y.Shi, J.Chen, Y.Wang, Z.Li, S.Huang. Proc. Inst. Mech. Eng. Part L. J. Mater. Des. Appl., 221, 37 (2007)
147.
Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS)
Ghita O.R., James E., Trimble R., Evans K.E.
Journal of Materials Processing Technology , 2014
149.
Selective Laser Sintering of PEEK
Schmidt M., Pohle D., Rechtenwald T.
CIRP Annals - Manufacturing Technology , 2007
150.
Mechanical research to optimize parameter selection for PPS material processed by FDM
Retolaza J., Gondra K., Ansola R., Allue A.
Materials and Manufacturing Processes , 2022
151.
3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials
Schönhoff L.M., Mayinger F., Eichberger M., Reznikova E., Stawarczyk B.
Journal of the Mechanical Behavior of Biomedical Materials , 2021
152.
Multi-functional ULTEM™1010 composite filaments for additive manufacturing using Fused Filament Fabrication (FFF)
Wu H., Sulkis M., Driver J., Saade-Castillo A., Thompson A., Koo J.H.
Additive Manufacturing , 2018
153.
X.Feng, J.Liu. In High Perform. Polym. Their Nanocomposites. (Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018). P. 149
156.
V.E.Yudin, J.U.Otaigbe, L.T.Drzal, V.M.Svetlichnyi. Adv. Compos. Lett., 15, 137 (2006)
157.
Effect of copolymerization on crystallization kinetics of semicrystalline polyimides
Wang W., Wang D., Jia H., Liu C., Zhao X., Chen C.
Journal of Applied Polymer Science , 2012
159.
Development of new polyimide powder for selective laser sintering
Vaganov G., Didenko A., Ivan’kova E., Popova E., Yudin V., Elokhovskii V., Lasota I.
Journal of Materials Research , 2019
160.
Molecular Modeling of the Crystal Structure of LARC-CPI Thermoplastic Polyimide
Brilihart M.V., Teverovsky J., Nagarkar P., Cebe P.
MRS Proceedings , 1993
161.
Crystallization of a thermoplastic polyimide
Tsai R., Lee D., Liu Y., Tsai H.
Journal of Applied Polymer Science , 2003
162.
Patent RU 2279452 (2006)
163.
V.M.Svetlichnyi, V.V.Kudryavtsev. Vysokomol. Soedin. Cep. B, 45, 984 (2003)
164.
The effect of imidization conditions on the structure and properties of fibres from partially crystallized polyimide
Vaganov G.V., Didenko A.L., Ivanov A.G., Ivan’kova E.M., Yudin V.E., Borisov I.L., Volkov A.V.
Journal of Physics: Conference Series , 2020
165.
M.Chao. Int. J. Polym. Sci., 2018, 8590567 (2018)
166.
Patent RU 2094441 (1997)
167.
High‐performance crystallized composite carbon nanoparticles/polyimide fibers
Vaganov G., Ivan'kova E., Didenko A., Popova E., Elokhovskiy V., Kasatkin I., Yudin V.
Journal of Applied Polymer Science , 2022
168.
Preparation of R-BABP Polyimide Fibers via Wet Spinning of Polyamide Acid
Vaganov G., Didenko A., Ivan’kova E., Popova E., Elokhovskii V., Volkov A.V., Borisov I.L., Yudin V.E.
Key Engineering Materials , 2020
169.
Patent US 2020/0087513 A1 (2020)
170.
Polyetherimide powders as material alternatives for selective laser-sintering components for aerospace applications
Lv Y., Thomas W., Chalk R., Hewitt A., Singamneni S.
Journal of Materials Research , 2020
172.
The study of heat-resistant fibers obtained from a melt of thermoplastic crystallizable polyimide
Vaganov G.V., Ivan’kova E.M., Didenko A.L., Popova E.N., Elokhovsky V.Y., Yudin V.E.
Journal of Physics: Conference Series , 2020
173.
Features of the Crystal Structure of the Polyimide Derived from 3,3'-Diaminobenzophenone and 3,3',4,4'-Benzophenonetetracarboxylic Dianhydride
Yudin V.E., Kalbin A.G., Meleshko T.K., Grigor'ev A.I., Gubanova G.N., Bogorad N.N., Panov Y.N., Pozdnyakov O.F., Redkov B.P., Pozdnyakov A.O., Kudryavtsev V.V.
Russian Journal of Applied Chemistry , 2001
174.
Fullerene-Modified Polyimide Derived from 3,3',4',-Benzophenonetetracarboxylic Acid and 3,3'-Diaminobenzophenone for Casted Items and Its Use in Tribology
Gubanova G.N., Meleshko T.K., Yudin V.E., Fadin Y.A., Kozyrev Y.P., Gofman V.I., Mikhailov A.A., Bogorad N.N., Kalbin A.G., Panov Y.N., Fedorova G.N., Kudryavtsev V.V.
Russian Journal of Applied Chemistry , 2003
175.
T.Kozior. Teh. Vjesn. -- Tech. Gaz., 27, 1092 (2020)
176.
Controlling the viscosity of melts of partially crystalline polyimides used for preparing carbon-reinforced plastics
Kostereva T.A., Panov Y.N., Didenko A.L., Silinskaya I.G., Svetlichnyi V.M., Yudin V.E., Kudryavtsev V.V.
Russian Journal of Applied Chemistry , 2004
177.
Rheological and Mechanical Properties of Thermoplastic Crystallizable Polyimide-Based Nanocomposites Filled with Carbon Nanotubes: Computer Simulations and Experiments
Nazarychev V.M., Vaganov G.V., Larin S.V., Didenko A.L., Elokhovskiy V.Y., Svetlichnyi V.M., Yudin V.E., Lyulin S.V.
Polymers , 2022
178.
Investigation and Characterization of New Polyimide Powder for Selective Laser Sintering
Vaganov G., Didenko A., Ivan’kova E., Popova E., Kuznetsova T., Kobykhno I., Yudin V.
Key Engineering Materials , 2019
179.
Development and Processing of New Composite Materials Based on High-Performance Semicrystalline Polyimide for Fused Filament Fabrication (FFF) and Their Biocompatibility
Polyakov I., Vaganov G., Didenko A., Ivan’kova E., Popova E., Nashchekina Y., Elokhovskiy V., Svetlichnyi V., Yudin V.
Polymers , 2022
181.
Silicon-Containing Polymers: The Science and Technology of Their Synthesis and Applications. (Eds R.G.Jones, W.Ando, C.Julian). (Netherlands; Springer, 2000)
182.
M.A.Brook. Silicon in Organic, Organometallic and Polymer Chemistry. (John Wiley & Sons, 1999)
187.
Siloxane-based polymer electrolytes for solid-state lithium batteries
Wang Q., Zhang H., Cui Z., Zhou Q., Shangguan X., Tian S., Zhou X., Cui G.
Energy Storage Materials , 2019
190.
Polysiloxane as icephobic materials – The past, present and the future
Zhuo Y., Xiao S., Amirfazli A., He J., Zhang Z.
Chemical Engineering Journal , 2021
191.
A Review on Fabrication Methods and Research Progress of Superhydrophobic Silicone Rubber Materials
Wang G., Li A., Zhao W., Xu Z., Ma Y., Zhang F., Zhang Y., Zhou J., He Q.
Advanced Materials Interfaces , 2020
193.
Silicone‐based biomaterials for biomedical applications: Antimicrobial strategies and 3D printing technologies
Zare M., Ghomi E.R., Venkatraman P.D., Ramakrishna S.
Journal of Applied Polymer Science , 2021
194.
Polymeric and ceramic silicon-based coatings – a review
Barroso G., Li Q., Bordia R.K., Motz G.
Journal of Materials Chemistry A , 2019
195.
Beyond Polydimethylsiloxane: Alternative Materials for Fabrication of Organ-on-a-Chip Devices and Microphysiological Systems
Campbell S.B., Wu Q., Yazbeck J., Liu C., Okhovatian S., Radisic M.
ACS Biomaterials Science and Engineering , 2020
197.
E.Yilgor, I.Yilgor. Prog. Polym. Sci., 39, 1165 (2014)
199.
3D Printing Silicone Materials and Devices
Yeo J., Koh J.J., Wang F., Li Z., He C.
2020
200.
X.Wang. Doctoral Thesis. Universitatsverlag der TU Berlin, 2019
201.
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou L., Fu J., He Y.
Advanced Functional Materials , 2020
202.
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger J., Sirrine J.M., Williams C.B., Long T.E.
Progress in Polymer Science , 2019
203.
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang Z., Diggle B., Tan M.L., Viktorova J., Bennett C.W., Connal L.A.
Advanced Science , 2020
204.
E.Luis, H.Liu, J.Song, W.Y.Yeong. J. Orthop. Res. Ther., 2018, 1104 (2018)
205.
How to tailor flexible silicone elastomers with mechanical integrity: a tutorial review
Mazurek P., Vudayagiri S., Skov A.L.
Chemical Society Reviews , 2019
206.
3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties
Ozbolat V., Dey M., Ayan B., Povilianskas A., Demirel M.C., Ozbolat I.T.
ACS Biomaterials Science and Engineering , 2018
207.
Soft Somatosensitive Actuators via Embedded 3D Printing
Truby R.L., Wehner M., Grosskopf A.K., Vogt D.M., Uzel S.G., Wood R.J., Lewis J.A.
Advanced Materials , 2018
208.
Custom 3D Printable Silicones with Tunable Stiffness
Durban M.M., Lenhardt J.M., Wu A.S., Small W., Bryson T.M., Perez‐Perez L., Nguyen D.T., Gammon S., Smay J.E., Duoss E.B., Lewicki J.P., Wilson T.S.
Macromolecular Rapid Communications , 2017
209.
Inkjet Printable Polydimethylsiloxane for All-Inkjet-Printed Multilayered Soft Electrical Applications
Mikkonen R., Puistola P., Jönkkäri I., Mäntysalo M.
ACS applied materials & interfaces , 2020
210.
3D reactive inkjet printing of polydimethylsiloxane
Sturgess C., Tuck C.J., Ashcroft I.A., Wildman R.D.
Journal of Materials Chemistry C , 2017
211.
Structure–Mechanical Property Relationships of 3D-Printed Porous Polydimethylsiloxane
Woo R., Chen G., Zhao J., Bae J.
ACS Applied Polymer Materials , 2021
212.
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton T.J., Hudson A., Pusch K., Lee A., Feinberg A.W.
ACS Biomaterials Science and Engineering , 2016
215.
“All-in-One” Thixotropic Polysiloxane Pastes for UV-Activated Room Temperature Hydrosilylation Cross-Linking in Additive Manufacturing
Beach J., Mann S., Ault C., Radojcic D., Wan X., Zlatanic A., Patterson S., Messman J.M., Dvornic P.R.
Macromolecules , 2021
216.
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh S., Parekh D.P., Bharti B., Stoyanov S.D., Velev O.D.
Advanced Materials , 2017
217.
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth J.T., Vogt D.M., Truby R.L., Mengüç Y., Kolesky D.B., Wood R.J., Lewis J.A.
Advanced Materials , 2014
218.
Silicone 3D Printing: Process Optimization, Product Biocompatibility, and Reliability of Silicone Meniscus Implants
Luis E., Pan H.M., Sing S.L., Bastola A.K., Goh G.D., Goh G.L., Tan H.K., Bajpai R., Song J., Yeong W.Y.
3D Printing and Additive Manufacturing , 2019
219.
Additive manufacturing by material extrusion with medical grade silicone elastomers and IR laser curing
Porter D.A., Davis N., Krueger P.S., Cohen A.L., Son D.
Rapid Prototyping Journal , 2020
220.
3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer
Luis E., Pan H.M., Sing S.L., Bajpai R., Song J., Yeong W.Y.
Polymers , 2020
221.
Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion
Smith J.A., Li S., Mele E., Goulas A., Engstrøm D., Silberschmidt V.V.
Journal of the Mechanical Behavior of Biomedical Materials , 2021
224.
Thiol–enes: Chemistry of the past with promise for the future
Hoyle C.E., Lee T.Y., Roper T.
Journal of Polymer Science, Part A: Polymer Chemistry , 2004
225.
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner M., Faber J.A., Pianegonda L., Rühs P.A., Coulter F., Studart A.R.
Nature Communications , 2018
226.
Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense
Robinson S.S., O’Brien K.W., Zhao H., Peele B.N., Larson C.M., Mac Murray B.C., Van Meerbeek I.M., Dunham S.N., Shepherd R.F.
Extreme Mechanics Letters , 2015
227.
3D printable tough silicone double networks
Wallin T.J., Simonsen L., Pan W., Wang K., Giannelis E., Shepherd R.F., Mengüç Y.
Nature Communications , 2020
228.
Click chemistry stereolithography for soft robots that self-heal
Wallin T.J., Pikul J.H., Bodkhe S., Peele B.N., Mac Murray B.C., Therriault D., McEnerney B.W., Dillon R.P., Giannelis E.P., Shepherd R.F.
Journal of Materials Chemistry B , 2017
231.
Self-healing, reprocessing and 3D printing of transparent and hydrolysis-resistant silicone elastomers
Liu Z., Hong P., Huang Z., Zhang T., Xu R., Chen L., Xiang H., Liu X.
Chemical Engineering Journal , 2020
232.
Functional siloxanes with photo-activated, simultaneous chain extension and crosslinking for lithography-based 3D printing
Sirrine J.M., Meenakshisundaram V., Moon N.G., Scott P.J., Mondschein R.J., Weiseman T.F., Williams C.B., Long T.E.
Polymer , 2018
233.
3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization
Sirrine J.M., Zlatanic A., Meenakshisundaram V., Messman J.M., Williams C.B., Dvornic P.R., Long T.E.
Macromolecular Chemistry and Physics , 2019
234.
Additive manufacturing of self-healing elastomers
Yu K., Xin A., Du H., Li Y., Wang Q.
NPG Asia Materials , 2019
235.
Superstretchable and Processable Silicone Elastomers by Digital Light Processing 3D Printing
Zhao T., Yu R., Li S., Li X., Zhang Y., Yang X., Zhao X., Wang C., Liu Z., Dou R., Huang W.
ACS applied materials & interfaces , 2019
236.
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan C.S., Bhattacharjee T., Hart S., Kabb C.P., Schulze K.D., Chilakala I., Sumerlin B.S., Sawyer W.G., Angelini T.E.
Science advances , 2017
237.
3D Printing of High Viscosity Reinforced Silicone Elastomers
Rodriguez N., Ruelas S., Forien J., Dudukovic N., DeOtte J., Rodriguez J., Moran B., Lewicki J.P., Duoss E.B., Oakdale J.S.
Polymers , 2021
238.
UV-curable, 3D printable and biocompatible silicone elastomers
Xiang H., Wang X., Ou Z., Lin G., Yin J., Liu Z., Zhang L., Liu X.
Progress in Organic Coatings , 2019
240.
Desktop-Stereolithography 3D-Printing of a Poly(dimethylsiloxane)-Based Material with Sylgard-184 Properties
Bhattacharjee N., Parra-Cabrera C., Kim Y.T., Kuo A.P., Folch A.
Advanced Materials , 2018
241.
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Thrasher C.J., Schwartz J.J., Boydston A.J.
ACS applied materials & interfaces , 2017
242.
Facile Photo and Thermal Two‐Stage Curing for High‐Performance 3D Printing of Poly(Dimethylsiloxane)
Ji Z., Jiang D., Zhang X., Guo Y., Wang X.
Macromolecular Rapid Communications , 2020
243.
Print your own membrane: direct rapid prototyping of polydimethylsiloxane
244.
Digital Light Processing 3D Printing of PDMS-Based Soft and Elastic Materials with Tunable Mechanical Properties
Du K., Basuki J., Glattauer V., Mesnard C., Nguyen A.T., Alexander D.L., Hughes T.C.
ACS Applied Polymer Materials , 2021
245.
Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
Zhou L., Gao Q., Fu J., Chen Q., Zhu J., Sun Y., He Y.
ACS applied materials & interfaces , 2019
246.
Catalyst Free Silicone Sealants That Cure Underwater
Bui R., Brook M.A.
Advanced Functional Materials , 2020
247.
Covalent adaptable networks of polydimethylsiloxane elastomer for selective laser sintering 3D printing
Sun S., Fei G., Wang X., Xie M., Guo Q., Fu D., Wang Z., Wang H., Luo G., Xia H.
Chemical Engineering Journal , 2021
248.
Synthesis of telechelic vinyl/allyl functional siloxane copolymers with structural control
Madsen F.B., Javakhishvili I., Jensen R.E., Daugaard A.E., Hvilsted S., Skov A.L.
Polymer Chemistry , 2014
249.
Versatile, efficient derivatization of polysiloxanes via click technology
Gonzaga F., Yu G., Brook M.A.
Chemical Communications , 2009
257.
Cu-Catalyzed Azide−Alkyne Cycloaddition
Meldal M., Tornøe C.W.
Chemical Reviews , 2008
259.
10.1002/1521-3773(20020715)41:14<2596::AID-ANIE2596>3.0.CO;2-4
260.
Ruthenium-Catalyzed Cycloaddition of Alkynes and Organic Azides
Zhang L., Chen X., Xue P., Sun H.H., Williams I.D., Sharpless K.B., Fokin V.V., Jia G.
Journal of the American Chemical Society , 2005
261.
Efficiency and Fidelity in a Click-Chemistry Route to Triazole Dendrimers by the Copper(I)-Catalyzed Ligation of Azides and Alkynes
Wu P., Feldman A.K., Nugent A.K., Hawker C.J., Scheel A., Voit B., Pyun J., Fréchet J.M., Sharpless K.B., Fokin V.V.
Angewandte Chemie - International Edition , 2004
262.
The growing impact of click chemistry on drug discovery
Kolb H.C., Sharpless K.B.
Drug Discovery Today , 2003
264.
Copper-catalysed azide–alkyne cycloadditions (CuAAC): an update
Haldón E., Nicasio M.C., Pérez P.J.
Organic and Biomolecular Chemistry , 2015
267.
S.Rubinsztajn, J.Cella. Polym. Prep., 45, 635 (2004)
268.
New Synthetic Strategies for Structured Silicones Using B(C6F5)3
Brook M.A., Grande J.B., Ganachaud F.
Advances in Polymer Science , 2010
271.
Metal-Free Room-Temperature Vulcanization of Silicones via Borane Hydrosilylation
Sample C.S., Lee S., Li S., Bates M.W., Lensch V., Versaw B.A., Bates C.M., Hawker C.J.
Macromolecules , 2019
272.
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering.
Billiet T., Vandenhaute M., Schelfhout J., Van Vlierberghe S., Dubruel P.
Biomaterials , 2012
273.
Bioprinting of 3D hydrogels.
Stanton M.M., Samitier J., Sánchez S.
Lab on a Chip , 2015
274.
4D Printing: Multi-Material Shape Change
Tibbits S.
Architectural Design , 2014
275.
Biomimetic 4D printing.
Sydney Gladman A., Matsumoto E.A., Nuzzo R.G., Mahadevan L., Lewis J.A.
Nature Materials , 2016
276.
4D printing of polymeric materials for tissue and organ regeneration.
Miao S., Castro N., Nowicki M., Xia L., Cui H., Zhou X., Zhu W., Lee S., Sarkar K., Vozzi G., Tabata Y., Fisher J., Zhang L.G.
Materials Today , 2017
277.
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang Y., Zhang F., Yan Z., Ma Q., Li X., Huang Y., Rogers J.A.
Nature Reviews Materials , 2017
278.
Advances in 4D Printing: Materials and Applications
Kuang X., Roach D.J., Wu J., Hamel C.M., Ding Z., Wang T., Dunn M.L., Qi H.J.
Advanced Functional Materials , 2018
279.
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay D.G., Dursun Usal T., Alagoz A.S., Yucel D., Hasirci N., Hasirci V.
Frontiers in Bioengineering and Biotechnology , 2019
280.
4D Printing: Future Insight in Additive Manufacturing
Zafar M.Q., Zhao H.
Metals and Materials International , 2019
281.
4D Printed Hydrogels: Fabrication, Materials, and Applications
Dong Y., Wang S., Ke Y., Ding L., Zeng X., Magdassi S., Long Y.
Advanced Materials Technologies , 2020
282.
Printing soft matter in three dimensions
Truby R.L., Lewis J.A.
Nature , 2016
283.
Hydrogel Walkers with Electro-Driven Motility for Cargo Transport
Yang C., Wang W., Yao C., Xie R., Ju X., Liu Z., Chu L.
Scientific Reports , 2015
284.
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst T., Smolan W., Schacht K., Scheibel T., Groll J.
Chemical Reviews , 2015
285.
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer D.M., Gorkin III R., in het Panhuis M.
Journal of Materials Chemistry B , 2015
286.
Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review
287.
A 3D-printable TEMPO-oxidized bacterial cellulose/alginate hydrogel with enhanced stability via nanoclay incorporation
Wei J., Wang B., Li Z., Wu Z., Zhang M., Sheng N., Liang Q., Wang H., Chen S.
Carbohydrate Polymers , 2020
288.
Direct 4D printing via active composite materials
Ding Z., Yuan C., Peng X., Wang T., Qi H.J., Dunn M.L.
Science advances , 2017
289.
Extrusion printing of ionic–covalent entanglement hydrogels with high toughness
Bakarich S.E., Panhuis M.I., Beirne S., Wallace G.G., Spinks G.M.
Journal of Materials Chemistry B , 2013
290.
Development of Optical 3D Gel Printer for Fabricating Free-Form Soft & Wet Industrial Materials and Evaluation of Printed Double-Network Gels
291.
Review of 3D printable hydrogels and constructs
Li H., Tan C., Li L.
Materials and Design , 2018
292.
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu J., Sun L., Xu W., Wang Q., Yu S., Sun J.
Carbohydrate Polymers , 2019
293.
Ag Nanowire-Based Stretchable Electrodes and Wearable Sensor Arrays
Che Q., Zhao Q., Hu M., Qin R., Shan G., Yang J.
ACS Applied Nano Materials , 2021
295.
3D Printing of Strong and Tough Double Network Granular Hydrogels
Hirsch M., Charlet A., Amstad E.
Advanced Functional Materials , 2020
298.
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong S., Sycks D., Chan H.F., Lin S., Lopez G.P., Guilak F., Leong K.W., Zhao X.
Advanced Materials , 2015
300.
3D Printing of Dual-Physical Cross-linking Hydrogel with Ultrahigh Strength and Toughness
Jiang P., Lin P., Yang C., Qin H., Wang X., Zhou F.
Chemistry of Materials , 2020
301.
Gelatin-polysaccharide composite scaffolds for 3D cell culture and tissue engineering: Towards natural therapeutics
Afewerki S., Sheikhi A., Kannan S., Ahadian S., Khademhosseini A.
Bioengineering & Translational Medicine , 2018
302.
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan B., Hockaday L.A., Kang K.H., Butcher J.T.
Journal of Biomedical Materials Research - Part A , 2012
303.
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Blaeser A., Duarte Campos D.F., Puster U., Richtering W., Stevens M.M., Fischer H.
Advanced healthcare materials , 2015
304.
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu W., Zhang Y.S., Heinrich M.A., De Ferrari F., Jang H.L., Bakht S.M., Alvarez M.M., Yang J., Li Y., Trujillo-de Santiago G., Miri A.K., Zhu K., Khoshakhlagh P., Prakash G., Cheng H., et. al.
Advanced Materials , 2016
305.
Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel
Han D., Farino C., Yang C., Scott T., Browe D., Choi W., Freeman J.W., Lee H.
ACS applied materials & interfaces , 2018
307.
Rheological evaluation of Laponite/alginate inks for 3D extrusion-based printing
Dávila J.L., d’Ávila M.A.
International Journal of Advanced Manufacturing Technology , 2018
309.
Injectable composites via functionalization of 1D nanoclays and biodegradable coupling with a polysaccharide hydrogel
Del Buffa S., Rinaldi E., Carretti E., Ridi F., Bonini M., Baglioni P.
Colloids and Surfaces B: Biointerfaces , 2016
311.
Insight into halloysite nanotubes-loaded gellan gum hydrogels for soft tissue engineering applications
Bonifacio M.A., Gentile P., Ferreira A.M., Cometa S., De Giglio E.
Carbohydrate Polymers , 2017
312.
Fabrication and characterization of 3D printable nanocellulose-based hydrogels for tissue engineering
313.
3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering
Dutta S.D., Hexiu J., Patel D.K., Ganguly K., Lim K.
International Journal of Biological Macromolecules , 2021
315.
Methylcellulose, a Cellulose Derivative with Original Physical Properties and Extended Applications
Nasatto P., Pignon F., Silveira J., Duarte M., Noseda M., Rinaudo M.
Polymers , 2015
316.
4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions
Shiblee M.N., Ahmed K., Kawakami M., Furukawa H.
Advanced Materials Technologies , 2019
317.
Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting
Jessop Z.M., Al-Sabah A., Gao N., Kyle S., Thomas B., Badiei N., Hawkins K., Whitaker I.S.
Biofabrication , 2019
318.
3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
Markstedt K., Mantas A., Tournier I., Martínez Ávila H., Hägg D., Gatenholm P.
Biomacromolecules , 2015
319.
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson K.M., Henriksson I.C., de la Peña Vázquez C., Kuzmenko V., Markstedt K., Enoksson P., Gatenholm P.
Advanced Materials Technologies , 2016
320.
Dynamically Crosslinked Gold Nanoparticle – Hyaluronan Hydrogels
Skardal A., Zhang J., McCoard L., Oottamasathien S., Prestwich G.D.
Advanced Materials , 2010
321.
322.
Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites.
Fan H., Wang L., Zhao K., Li N., Shi Z., Ge Z., Jin Z.
Biomacromolecules , 2010
324.
Three-Dimensional (3D) Printed Silver Nanoparticles/Alginate/Nanocrystalline Cellulose Hydrogels: Study of the Antimicrobial and Cytotoxicity Efficacy
Bergonzi C., Remaggi G., Graiff C., Bergamonti L., Potenza M., Ossiprandi M.C., Zanotti I., Bernini F., Bettini R., Elviri L.
Nanomaterials , 2020
325.
Recent Progress in Biomimetic Anisotropic Hydrogel Actuators
Le X., Lu W., Zhang J., Chen T.
Advanced Science , 2019
326.
3D Printing of Living Responsive Materials and Devices
Liu X., Yuk H., Lin S., Parada G.A., Tang T., Tham E., de la Fuente‐Nunez C., Lu T.K., Zhao X.
Advanced Materials , 2017
327.
Hybrid 3D Printing of Soft Electronics
Valentine A.D., Busbee T.A., Boley J.W., Raney J.R., Chortos A., Kotikian A., Berrigan J.D., Durstock M.F., Lewis J.A.
Advanced Materials , 2017
328.
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li J., Wu C., Chu P.K., Gelinsky M.
Materials Science and Engineering: R: Reports , 2020
329.
O.E.Filippova. Vysocomol. Soedin., Ser. C, 42, 2328 (2000)
330.
Polyelectrolyte networks as highly sensitive polymers
Kramarenko E.Y., Philippova O.E., Khokhlov A.R.
Polymer Science - Series C , 2006
331.
Polymer Gels
Philippova O.E., Khokhlov A.R.
Polymer Science: A Comprehensive Reference, 10 Volume Set , 2012
332.
Double-Network Hydrogels with Extremely High Mechanical Strength
Gong J.P., Katsuyama Y., Kurokawa T., Osada Y.
Advanced Materials , 2003
334.
Fundamentals of double network hydrogels
Chen Q., Chen H., Zhu L., Zheng J.
Journal of Materials Chemistry B , 2015
336.
Mechanically Strong, Electrically Conductive, and Biocompatible Graphene Paper
Chen H., Müller M.B., Gilmore K.J., Wallace G.G., Li D.
Advanced Materials , 2008
337.
Soft nanocomposites based on nanoclay particles and mixed wormlike micelles of surfactants
Molchanov V.S., Efremova M.A., Orekhov A.S., Arkharova N.A., Rogachev A.V., Philippova O.E.
Journal of Molecular Liquids , 2020
338.
Anhydride modified silica nanoparticles: Preparation and characterization
Barabanova A.I., Pryakhina T.A., Afanas’ev E.S., Zavin B.G., Vygodskii Y.S., Askadskii A.A., Philippova O.E., Khokhlov A.R.
Applied Surface Science , 2012
340.
A.L.Volynskii, N.F.Bakeev. Solvent Crazing of Polymers. (Amsterdam: Elsevier, 1995)
343.
The effect of preliminary orientation of polymers via tensile drawing at elevated temperature on solvent crazing
Arzhakova O.V., Dolgova A.A., Chernov I.V., Yarysheva L.M., Volynskii A.L., Bakeev N.F.
Polymer Science - Series A , 2007
345.
Stretching-Induced Uniform Micropores Formation: An in Situ SAXS/WAXS Study
Lei C., Xu R., Tian Z., Huang H., Xie J., Zhu X.
Macromolecules , 2018
347.
G.R.Strobl. The Physics of Polymers. (Berlin, Heidelberg: Springer, 2007)
348.
349.
The effect of preliminary orientation on environmental crazing of high-density polyethylene films
350.
Atomic force microscopic study of the structure of high‐density polyethylene deformed in liquid medium by crazing mechanism
BAGROV D.V., YARYSHEVA A.Y., RUKHLYA E.G., YARYSHEVA L.M., VOLYNSKII A.L., BAKEEV N.F.
Journal of Microscopy , 2013
351.
Specific features of the environmental crazing of poly(ethylene terephthalate) fibers
Arzhakova O.V., Dolgova A.A., Yarysheva L.M., Volynskii A.L., Bakeev N.F.
Polymer , 2015
352.
Influence of liquid media on the craze initiation in amorphous polylactide
Trofimchuk E.S., Nikonorova N.I., Moskvina M.A., Efimov A.V., Khavpachev M.A., Volynskii A.L.
Polymer , 2018
353.
Evolution of the Nanoporous Structure of High-Density Polyethylene during Drawing in Supercritical Carbon Dioxide
Dudnik A.O., Trofimchuk E.S., Efimov A.V., Nikonorova N.I., Rukhlya E.G., Nikitin L.N., Yaminsky I.V., Volynskii A.L.
Macromolecules , 2018
354.
Confinement Effect on Strain Localizations in Glassy Polymer Films
Bay R.K., Shimomura S., Liu Y., Ilton M., Crosby A.J.
Macromolecules , 2018
356.
E.J.Kramer. In Crazing Polym. (Ed H.H.Kausch). (Berlin, Heidelberg: Springer-Verlag, 1983). P. 1
358.
Regularities of the Rehbinder effect in polymers. Review
Volynskii A.L., Bakeev N.F.
Protection of Metals and Physical Chemistry of Surfaces , 2013
360.
Cavitation during Tensile Deformation of Polypropylene
361.
Effect of microstructure on crazing onset in polyethylene under tension
Addiego F., Dahoun A., G'Sell C., Hiver J., Godard O.
Polymer Engineering and Science , 2009
362.
Experimental investigation of craze morphology of isotactic polypropylene using computed tomography
SOKKAR T.Z., EL-FARAHATY K.A., RASLAN M.I., HAMZA A.A.
Journal of Microscopy , 2016
363.
Deformation and pore formation mechanism under tensile loading in isotactic polypropylene
364.
The structural evolution of high-density polyethylene during crazing in liquid medium
Yarysheva A.Y., Rukhlya E.G., Yarysheva L.M., Bagrov D.V., Volynskii A.L., Bakeev N.F.
European Polymer Journal , 2015
365.
Which way do fibrils disappear?
Yarysheva A.Y., Bagrov D.V., Kechek'yan P.A., Rukhlya E.G., Bakirov A.V., Yarysheva L.M., Chvalun S.N., Volynskii A.L.
Polymer , 2019
366.
Mechanoresponsive Hard Elastic Materials Based on Semicrystalline Polymers: From Preparation to Applied Properties
Arzhakova O.V., Dolgova A.A., Yarysheva A.Y., Nikishin I.I., Volynskii A.L.
ACS Applied Polymer Materials , 2020
367.
Development of a stable open-porous structure in the solvent-crazed high-density polyethylene
Arzhakova O.V., Dolgova A.A., Yarysheva L.M., Volynskii A.L., Bakeev N.F.
Inorganic Materials: Applied Research , 2011
368.
S.B.Jenkins. Nanoporous Materials: Types, Properties and Uses. Nova Science Publishers, New York, 2010
369.
Nanoporous polymeric materials: A new class of materials with enhanced properties
Notario B., Pinto J., Rodriguez-Perez M.A.
Progress in Materials Science , 2016
370.
Design and synthesis of porous polymeric materials and their applications in gas capture and storage: a review
Ahmed D.S., El-Hiti G.A., Yousif E., Ali A.A., Hameed A.S.
Journal of Polymer Research , 2018
371.
Phosphorescent O2 sensors integrated in polymeric film materials by local solvent crazing
Kelly C.A., Toncelli C., Cruz-Romero M., Arzhakova O.V., Kerry J.P., Papkovsky D.B.
Materials and Design , 2015
372.
Phosphorescent oxygen sensors produced by spot-crazing of polyphenylenesulfide films
Toncelli C., Arzhakova O.V., Dolgova A., Volynskii A.L., Kerry J.P., Papkovsky D.B.
Journal of Materials Chemistry C , 2014
373.
“Green” environmental crazing of polymers in oil-in-water emulsions with high water content
Arzhakova O.V., Kopnov A.Y., Nazarov A.I., Dolgova A.A., Volynskii A.L.
Polymer , 2020
374.
Breathable polymeric materials based on high‐density polyethylene prepared by environmental crazing
Yarysheva A., Rukhlya E., Grokhovskaya T., Dolgova A., Arzhakova O.V.
Journal of Applied Polymer Science , 2019
375.
Surface modification of poly(tetrafluoroethylene) and poly(ethylene terephthalate) films via environmental crazing
Yarysheva A., Strel'tsov D., Malakhov S., Arzhakova O., Yarysheva L., Volynskii A.
Polymer International , 2020
376.
Patent RU 2711547 (2020)
377.
Patent US 5516473 (1996)
379.
Patent RU 2711427 (2020)
380.
Patent RU 2717268 (2020)
381.
Oxygen-sensitive phosphorescent nanomaterials produced from high-density polyethylene films by local solvent-crazing.
Toncelli C., Arzhakova O.V., Dolgova A., Volynskii A.L., Bakeev N.F., Kerry J.P., Papkovsky D.B.
Analytical Chemistry , 2014
382.
Phosphorescent Oxygen and Mechanosensitive Nanostructured Materials Based on Hard Elastic Polypropylene Films.
Okkelman I.A., Dolgova A.A., Banerjee S., Kerry J.P., Volynskii A., Arzhakova O.V., Papkovsky D.B.
ACS applied materials & interfaces , 2017
383.
FET-based sensors with robust photosensitive polymer membranes for detection of ammonium ions and urea
Kazanskaya N., Kukhtin A., Manenkova M., Reshetilov N., Yarysheva L., Arzhakova O., Volynskii A., Bakeyev N.
Biosensors and Bioelectronics , 1996
384.
Phosphorescent Oxygen Sensors Based on Nanostructured Polyolefin Substrates
Gillanders R.N., Arzhakova O.V., Hempel A., Dolgova A., Kerry J.P., Yarysheva L.M., Bakeev N.F., Volynskii A.L., Papkovsky D.B.
Analytical Chemistry , 2009
385.
Patent US 2011/0244592 A1 (2011)
386.
Yarysheva Alena Yurievna, Dolgova Alla Anatol'evna, Yarysheva Larisa Mikhailovna, Arzhakova Ol'ga Vladimirovna
Mendeleev Communications , 2020
387.
Penetration of Poly(ethylene oxide) into the Nanoporous Structure of the Solvent-Crazed Poly(ethylene terephthalate) Films
Rukhlya E.G., Litmanovich E.A., Dolinnyi A.I., Yarysheva L.M., Volynskii A.L., Bakeev N.F.
Macromolecules , 2011
388.
Features of the delocalized crazing of high-density polyethylene in poly(ethylene oxide) solutions
Yarysheva A.Y., Bagrov D.V., Rukhlya E.G., Yarysheva L.M., Volynskii A.L., Bakeev N.F.
Polymer Science - Series A , 2012
389.
Patent RU 2243978 (2005)
390.
Patent RU 2228431 (2004)
391.
Patent RU 2225871 (2004)
392.
Patent RU 2228851 (2004)
393.
Patent RU 2217319 (2003)
395.
M.S.Arzhakov. Thermomechanics of Polymers. Accent Graphics Communications. (Montreal, 2019)
396.
A New Approach for Preparation of Modern Polymeric Materials Based on Polymer Glasses
Arzhakov M.S., Arzhakov S.A., Chernavin V.A.
International Journal of Polymeric Materials and Polymeric Biomaterials , 1998
397.
M.S.Arzhakov, S.A.Arzhakov, V.A.Chernavin. New Polym. Mater., 5, 43 (1996)
398.
A.G.Kolmakov, I.B.Oparina, M.A.Sevostyanov, M.S.Arzhakov, G.M.Lukovkin. Eurasian Phys. Tech. J., 12, 33 (2015)
399.
Glass ceramic and polymer impact-resistant materials and protective constructions based on them (Review)
Arzhakov M.S., Zhirnov A.E., Arzhakov S.A., Lukovkin G.M., Kolmakov A.G., Zabolotnyi V.T.
Russian Metallurgy (Metally) , 2015
403.
Microsecond MD Simulation and Multiple-Conformation Virtual Screening to Identify Potential Anti-COVID-19 Inhibitors Against SARS-CoV-2 Main Protease
407.
Perspective: Dissipative particle dynamics
Español P., Warren P.B.
Journal of Chemical Physics , 2017
408.
The dynamic mean-field density functional method and its application to the mesoscopic dynamics of quenched block copolymer melts
Fraaije J.G., van Vlimmeren B.A., Maurits N.M., Postma M., Evers O.A., Hoffmann C., Altevogt P., Goldbeck-Wood G.
Journal of Chemical Physics , 1997
409.
Mesoscale simulation of morphology in hydrated perfluorosulfonic acid membranes
Wescott J.T., Qi Y., Subramanian L., Weston Capehart T.
Journal of Chemical Physics , 2006
410.
K.S.Schweizer, J.G.Curro. In Atomistic Modeling of Physical Properties. (Eds L.Monnerie, U.W.Suter). (Berlin, Heidelberg: Springer, 1994). P. 319
411.
Self-Assembly of Lecithin and Bile Salt in the Presence of Inorganic Salt in Water: Mesoscale Computer Simulation
Markina A.A., Ivanov V.A., Komarov P.V., Khokhlov A.R., Tung S.
Journal of Physical Chemistry B , 2017
412.
Effect of polymer chain stiffness on initial stages of crystallization of polyetherimides: Coarse-grained computer simulation
Markina A., Ivanov V., Komarov P., Larin S., Kenny J.M., Lyulin S.
Journal of Polymer Science, Part B: Polymer Physics , 2017
414.
Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review
Gupta M.K., Srivastava R.K.
Polymer-Plastics Technology and Engineering , 2015
416.
Multiscale Problems in Polymer Science: Simulation Approaches
417.
Multiscale modeling and simulation of polymer nanocomposites
Zeng Q.H., Yu A.B., Lu G.Q.
Progress in Polymer Science , 2008
419.
Molecular and Mesoscale Simulation Methods for Polymer Materials
422.
From Coarse Grained to Atomistic: A Serial Multiscale Approach to Membrane Protein Simulations
Stansfeld P.J., Sansom M.S.
Journal of Chemical Theory and Computation , 2011
423.
Softer at the boundary
Mayes A.M.
Nature Materials , 2005
424.
Investigation of Thermal Expansion of Polyimide/SiO2 Nanocomposites by Molecular Dynamics Simulations
Komarov P.V., Chiu Y., Chen S., Reineker P.
Macromolecular Theory and Simulations , 2009
425.
Quantitative equivalence between polymer nanocomposites and thin polymer films
Bansal A., Yang H., Li C., Cho K., Benicewicz B.C., Kumar S.K., Schadler L.S.
Nature Materials , 2005
426.
Molecular Dynamics Study of Interface Structure in Composites Comprising Surface-Modified SiO2Nanoparticles and a Polyimide Matrix
Komarov P.V., Mikhailov I.V., Chiu Y.-., Chen S.-., Khalatur P.G.
Macromolecular Theory and Simulations , 2013
428.
Molecular-dynamics simulations of thin polyisoprene films confined between amorphous silica substrates
429.
Computational synthesis, structure, and glass transition of (1,4) Cis-polyisoprene-based nanocomposite by multiscale modeling
Guseva D.V., Komarov P.V., Lyulin A.V.
Journal of Polymer Science, Part B: Polymer Physics , 2015
430.
10.1021/ma070702+
431.
Thermal Properties and Topology of Epoxy Networks: A Multiscale Simulation Methodology
432.
Crosslinking mechanisms, structure and glass transition in phthalonitrile resins: Insight from computer multiscale simulations and experiments
Guseva D.V., Rudyak V.Y., Komarov P.V., Sulimov A.V., Bulgakov B.A., Chertovich A.V.
Journal of Polymer Science, Part B: Polymer Physics , 2017
433.
Dynamic and static mechanical properties of crosslinked polymer matrices: Multiscale simulations and experiments
Guseva D., Rudyak V., Komarov P., Bulgakov B., Babkin A., Chertovich A.
Polymers , 2018
434.
Hypercrosslinked polystyrene networks: An atomistic molecular dynamics simulation combined with a mapping/reverse mapping procedure
Lazutin A.A., Glagolev M.K., Vasilevskaya V.V., Khokhlov A.R.
Journal of Chemical Physics , 2014
437.
Computer synthesis of hypercrosslinked polystyrene: All-atom simulations
Lazutin A.A., Glagoleva A.A., Vasilevskaya V.V., Khokhlov A.R.
Low Temperature Physics , 2017
438.
Biomimetic sequence design in functional copolymers
Khokhlov A.R., Khalatur P.G.
Current Opinion in Solid State and Materials Science , 2004
439.
Computer modeling of radical copolymerization under unusual conditions
Khokhlov A.R., Berezkin A.V., Khalatur P.G.
Journal of Polymer Science, Part A: Polymer Chemistry , 2004
440.
Theoretical Study of Twin Polymerization - From Chemical Reactivity to Structure Formation
Auer A.A., Richter A., Berezkin A.V., Guseva D.V., Spange S.
Macromolecular Theory and Simulations , 2012
441.
Multi-paradigm multi-scale simulations for fuel cell catalysts and membranes
Goddard W., Merinov B., van Duin A., Jacob T., Blanco M., Molinero V., Jang S.S., Jang Y.H.
Molecular Simulation , 2006
443.
Predicting mechanical response of crosslinked epoxy using ReaxFF
Odegard G.M., Jensen B.D., Gowtham S., Wu J., He J., Zhang Z.
Chemical Physics Letters , 2014
444.
Coarse-grained A-graft-B model of poly(lactic acid) for molecular dynamics simulations
Glagolev M., Glova A., Mezhenskaia D., Falkovich S., Larin S., Vasilevskaya V., Lyulin S.
Journal of Polymer Science, Part B: Polymer Physics , 2017
445.
M.K.Glagolev, V.V.Vasilevskaya. Supercomput. Front. Innov., 5, 103 (2018)
447.
Atomistic simulation of poly (lactic acid) of different regioregularity
448.
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
Haider T.P., Völker C., Kramm J., Landfester K., Wurm F.R.
Angewandte Chemie - International Edition , 2018
449.
BIODEGRADABLE POLYMER MATERIALS FOR MEDICAL APPLICATIONS: FROM IMPLANTS TO ORGANS
Gomzyak V.I., Demina V.A., Razuvaeva E.V., Sedush N.G., Chvalun S.N.
Fine Chemical Technologies , 2017
450.
Current development of biodegradable polymeric materials for biomedical applications
Song R., Murphy M., Li C., Ting K., Soo C., Zheng Z.
Drug Design, Development and Therapy , 2018
451.
Application of Biodegradable Polymers in Food Packaging Industry: A Comprehensive Review
Mangaraj S., Yadav A., Bal L.M., Dash S.K., Mahanti N.K.
Journal of Packaging Technology and Research , 2018
452.
Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review
Zhong Y., Godwin P., Jin Y., Xiao H.
Advanced Industrial and Engineering Polymer Research , 2020
453.
R.Thomson. Marine Anthropogenic Litter. (Cham: Springer International Publishing, 2015)
454.
The way of microplastic through the environment – Application of the source-pathway-receptor model (review)
Waldschläger K., Lechthaler S., Stauch G., Schüttrumpf H.
Science of the Total Environment , 2020
455.
Biodegradable starch-based polymeric materials
Suvorova A.I., Tyukova I.S., Trufanova E.I.
Russian Chemical Reviews , 2000
456.
Developing acrylated epoxidized soybean oil coating for improving moisture sensitivity and permeability of starch-based film
Ge X., Yu L., Liu Z., Liu H., Chen Y., Chen L.
International Journal of Biological Macromolecules , 2019
457.
T.Jiang, Q.Duan, J.Zhu, H.Liu, L.Yu. Adv. Ind. Eng. Polym. Res., 3, 8 (2020)
458.
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas B., Raj M.C., B A.K., H R.M., Joy J., Moores A., Drisko G.L., Sanchez C.
Chemical Reviews , 2018
459.
Q.Xia, C.Chen, Y.Yao, J.Li, S.He, Y.Zhou, T.Li, X.Pan, Y.Yao, L.Hu. Nat. Sustain., (2021)
460.
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova O.I., Chvalun S.N.
Polymer Science - Series A , 2016
461.
Emerging Chitosan-Based Films for Food Packaging Applications
Wang H., Qian J., Ding F.
Journal of Agricultural and Food Chemistry , 2018
464.
O.I.Bogdanova, N.G.Sedush, T.N.Ovchinnikova, S.I.Belousov, D.K.Polyakov, S.N.Chvalun. Ekolog. Promysh. Rossii , 18 (2010)
465.
Overview of Poly(lactic Acid)
466.
Sedush Nikita Gennad'evich, Izraylit Victor Vladimirovich, Mailyan Arthur Karenovich, Savinov Dmitrii Valer'evich, Kiryukhin Yury Ivanovich, Chvalun Sergei Nikolaevich
Mendeleev Communications , 2017
467.
Kinetics of D,L–Lactide Polymerization Initiated with Zirconium Acetylacetonate
Kalinin K.T., Sedush N.G., Dmitryakov P.V., Chvalun S.N.
ChemistryOpen , 2020
468.
Synthesis, structure and properties of poly(L-lactide-co--caprolactone) statistical copolymers
Fernández J., Etxeberria A., Sarasua J.
Journal of the Mechanical Behavior of Biomedical Materials , 2012
470.
Cold Crystallization of Glassy Polylactide during Solvent Crazing
Trofimchuk E.S., Efimov A.V., Grokhovskaya T.E., Nikonorova N.I., Moskvina M.A., Sedush N.G., Dorovatovskii P.V., Ivanova O.A., Rukhlya E.G., Volynskii A.L., Chvalun S.N.
ACS applied materials & interfaces , 2017
471.
Super tough poly(lactic acid) blends: a comprehensive review
Zhao X., Hu H., Wang X., Yu X., Zhou W., Peng S.
RSC Advances , 2020
472.
Polylactic acid blends: The future of green, light and tough
Hamad K., Kaseem M., Ayyoob M., Joo J., Deri F.
Progress in Polymer Science , 2018
473.
Biodegradable Polymer Materials Based on Polylactide
Rogovina S.Z., Aleksanyan K.V., Vladimirov L.V., Berlin A.A.
Russian Journal of Physical Chemistry B , 2019
474.
Poly(lactic acid) stereocomplexes: A decade of progress
476.
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray S., Yamada K., Okamoto M., Ogami A., Ueda K.
Chemistry of Materials , 2003
478.
Environmentally friendly fertilizers: A review of materials used and their effects on the environment.
Chen J., Lü S., Zhang Z., Zhao X., Li X., Ning P., Liu M.
Science of the Total Environment , 2018
479.
Physical and chemical characteristics of controlled release compound fertiliser
Hanafi M.M., Eltaib S.M., Ahmad M.B.
European Polymer Journal , 2000
481.
Preparation and characterization of slow-release fertilizer encapsulated by starch-based superabsorbent polymer.
Qiao D., Liu H., Yu L., Bao X., Simon G.P., Petinakis E., Chen L.
Carbohydrate Polymers , 2016
483.
Slow and Fast-Release Boron Sources in Potash Fertilizers: Spatial Variability, Nutrient Dissolution and Plant Uptake
da Silva R.C., Baird R., Degryse F., McLaughlin M.J.
Soil Science Society of America Journal , 2018
484.
Preparation and study of properties of boron-containing polymer based on lactic and boric acids
Svishcheva N.B., Khaptakhanova P.A., Kasatov D.A., Uspenskii S.A.
Russian Chemical Bulletin , 2021
486.
Coating of fertilizers by degradable polymers
Devassine M., Henry F., Guerin P., Briand X.
International Journal of Pharmaceutics , 2002
487.
Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release
Trinh T.H., Kushaari K., Shuib A.S., Ismail L., Azeem B.
Biosystems Engineering , 2015
488.
Development of a green material for horticulture
Oliveira M., Mota C., Abreu A.S., Nobrega J.M.
Journal of Polymer Engineering , 2014
489.
Characterization and biodegradation behavior of bio-based poly(lactic acid) and soy protein blends for sustainable horticultural applications
Yang S., Madbouly S.A., Schrader J.A., Srinivasan G., Grewell D., McCabe K.G., Kessler M.R., Graves W.R.
Green Chemistry , 2015
490.
Fabrication of a High-Performance Fertilizer To Control the Loss of Water and Nutrient Using Micro/Nano Networks
Zhou L., Cai D., He L., Zhong N., Yu M., Zhang X., Wu Z.
ACS Sustainable Chemistry and Engineering , 2015
491.
Novel Slow-Release Nanocomposite Nitrogen Fertilizers: The Impact of Polymers on Nanocomposite Properties and Function
Pereira E.I., da Cruz C.C., Solomon A., Le A., Cavigelli M.A., Ribeiro C.
Industrial & Engineering Chemistry Research , 2015
493.
Polymer Brushes by the “Grafting to” Method
Zdyrko B., Luzinov I.
Macromolecular Rapid Communications , 2011
494.
Laundering Durability of Superhydrophobic Cotton Fabric
Deng B., Cai R., Yu Y., Jiang H., Wang C., Li J., Li L., Yu M., Li J., Xie L., Huang Q., Fan C.
Advanced Materials , 2010
496.
A facile method to fabricate superhydrophobic cotton fabrics
Zhang M., Wang S., Wang C., Li J.
Applied Surface Science , 2012
497.
A simple approach to fabricate stable superhydrophobic glass surfaces
Ji H., Chen G., Yang J., Hu J., Song H., Zhao Y.
Applied Surface Science , 2013
498.
Fabrication of Inherent Anticorrosion Superhydrophobic Surfaces on Metals
Xiang T., Han Y., Guo Z., Wang R., Zheng S., Li S., Li C., Dai X.
ACS Sustainable Chemistry and Engineering , 2018
501.
Investigation of the effectiveness of absorbent materials in oil spills clean up
Teas C., Kalligeros S., Zanikos F., Stournas S., Lois E., Anastopoulos G.
Desalination , 2001
502.
Superhydrophilic–superoleophobic coatings
Yang J., Zhang Z., Xu X., Zhu X., Men X., Zhou X.
Journal of Materials Chemistry A , 2012
504.
Asymmetric Superhydrophobic/Superhydrophilic Cotton Fabrics Designed by Spraying Polymer and Nanoparticles
Sasaki K., Tenjimbayashi M., Manabe K., Shiratori S.
ACS applied materials & interfaces , 2015
505.
Hydrophilic and superhydrophilic surfaces and materials
Drelich J., Chibowski E., Meng D.D., Terpilowski K.
Soft Matter , 2011
506.
Fabrication and application of superhydrophilic surfaces: a review
Zhang L., Zhao N., Xu J.
Journal of Adhesion Science and Technology , 2012
507.
Reusable, salt-tolerant and superhydrophilic cellulose hydrogel-coated mesh for efficient gravity-driven oil/water separation
Ao C., Hu R., Zhao J., Zhang X., Li Q., Xia T., Zhang W., Lu C.
Chemical Engineering Journal , 2018
509.
Superhydrophobic cellulose nanocomposites
Gonçalves G., Marques P.A., Trindade T., Neto C.P., Gandini A.
Journal of Colloid and Interface Science , 2008
511.
Superhydrophobic chitosan-based coatings for textile processing
Ivanova N.A., Philipchenko A.B.
Applied Surface Science , 2012
513.
Functionalized superhydrophobic biomimetic chitosan-based films
Song W., Gaware V.S., Rúnarsson Ö.V., Másson M., Mano J.F.
Carbohydrate Polymers , 2010
516.
Superhydrophobic modification of cellulose and cotton textiles: Methodologies and applications
Wei D.W., Wei H., Gauthier A.C., Song J., Jin Y., Xiao H.
Journal of Bioresources and Bioproducts , 2020
517.
Microbial Enzymatic Degradation of Biodegradable Plastics
Roohi, Bano K., Kuddus M., Zaheer M.R., Zia Q., Khan M.F., Ashraf G.M., Gupta A., Aliev G.
Current Pharmaceutical Biotechnology , 2017
518.
F.Alshehrei. J. Appl. Environ. Microbiol., 5, 8 (2017)
519.
Biodegradable polymers
Chandra R.
Progress in Polymer Science , 1998
523.
Potts J.E., Clendinning R.A., Ackart W.B., Niegisch W.D.
1973
525.
A.Gopferich. Biomater. Silver Jubil. Compend., 17, 117 (1996)
526.
Synthetic biodegradable polymers as orthopedic devices
529.
Chitosan-grafted poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) membranes for reversible enzyme immobilization
531.
In Situ and Ex Situ pH-Responsive Coatings with Switchable Wettability for Controllable Oil/Water Separation
533.
Chitosan hybrid microgels for oral drug delivery
Galdioli Pellá M.C., Simão A.R., Lima-Tenório M.K., Tenório-Neto E., Scariot D.B., Nakamura C.V., Rubira A.F.
Carbohydrate Polymers , 2020
535.
Enhancing the Superhydrophobic State Stability of Chitosan-Based Coatings for Textiles
Ivanova N.A., Rutberg G.I., Philipchenko A.B.
Macromolecular Chemistry and Physics , 2013
537.
Aldehyde Approach to Hydrophobic Modification of Chitosan Aerogels
Takeshita S., Konishi A., Takebayashi Y., Yoda S., Otake K.
Biomacromolecules , 2017
538.
Chemically modified chitin and chitosan as biomaterials
539.
Chitin/chitosan: modifications and their unlimited application potential—an overview
Harish Prashanth K.V., Tharanathan R.N.
Trends in Food Science and Technology , 2007
540.
Preparation and characterisation of fluorescent chitosans using 9-anthraldehyde as fluorophore
Tømmeraas K., Strand S.P., Tian W., Kenne L., Vårum K.M.
Carbohydrate Research , 2001
541.
Superhydrophobic surfaces generated by one-pot spray-coating of chitosan-based nanoparticles
542.
Formation of a DNA/N-dodecylated chitosan complex and salt-induced gene delivery
Liu W.G., De Yao K., Liu Q.G.
Journal of Applied Polymer Science , 2001
544.
Chemically induced graft copolymerization of vinyl monomers onto cotton fibers
Pulat M., Isakoca C.
Journal of Applied Polymer Science , 2006
545.
Biodegradability and Biodegradation of Polyesters
Tokiwa Y., Calabia B.P.
Journal of Polymers and the Environment , 2007
547.
Kamel S., Ali N., Jahangir K., Shah S.M., El-Gendy A.A.
Express Polymer Letters , 2008
548.
Introduction to Cellulose Nanocomposites
Sain M., Oksman K.
ACS Symposium Series , 2006
549.
A Critical Review of Cellulose Solvent Systems
TURBAK A.F., HAMMER R.B., DAVIES R.E., PORTNOY N.A.
ACS Symposium Series , 1977
550.
Dissolution Mechanism of Cellulose in N,N-Dimethylacetamide/Lithium Chloride: Revisiting through Molecular Interactions
Zhang C., Liu R., Xiang J., Kang H., Liu Z., Huang Y.
Journal of Physical Chemistry B , 2014
551.
Cellulose organic solutions: A nuclear magnetic resonance investigation
Gagnaire D., Mancier D., Vincendon M.
Journal of Polymer Science Polymer Chemistry Edition , 1980
552.
The Solubility of Unmodified Cellulose: A Critique of the Literature
Hudson S.M., Cuculo J.A.
Journal of Macromolecular Science Part C- Polymer Reviews , 1980
553.
John Mercer and mercerization, 1844
Heines S.V.
Journal of Chemical Education , 1944
554.
H.A.Krassig. Cellulose: Structure, Accessibility and Reactivity. (Yverdon, Switzerland: Gordon and Breach Science, 1993)
555.
10.1002/(SICI)1521-3935(20000301)201:6<627::AID-MACP627>3.0.CO;2-Y
556.
Acid hydrolysis of cellulose in zinc chloride solution
Cao N.J., Xu Q., Chen L.F.
Applied Biochemistry and Biotechnology , 1995
557.
Cellulose hydrolysis using zinc chloride as a solvent and catalyst
Cao N., Xu Q., Chen C., Gong C.S., Chen L.F.
Applied Biochemistry and Biotechnology , 1994
558.
10.1002/(SICI)1097-4628(19990228)71:9<1441::AID-APP8>3.0.CO;2-G
559.
Ultramikroskopische Struktur der gallertartigen Niederschläge und der Gallerte
Weimarn P.P.
Zeitschrift für Chemie und Industrie der Kolloide , 1912
561.
Dissolution of Microcrystalline Cellulose in Phosphoric Acid—Molecular Changes and Kinetics
Zhang J., Zhang J., Lin L., Chen T., Zhang J., Liu S., Li Z., Ouyang P.
Molecules , 2009
562.
Dissolution Mechanism of Crystalline Cellulose in H3PO4As Assessed by High-Field NMR Spectroscopy and Fast Field Cycling NMR Relaxometry
Conte P., Maccotta A., De Pasquale C., Bubici S., Alonzo G.
Journal of Agricultural and Food Chemistry , 2009
563.
10.1002/(SICI)1097-4660(199612)67:4<350::AID-JCTB564>3.0.CO;2-9
565.
Production of Cellulose II from Native Cellulose by Near- and Supercritical Water Solubilization
Sasaki M., Adschiri T., Arai K.
Journal of Agricultural and Food Chemistry , 2003
566.
Kinetics of cellulose conversion at 25 MPa in sub- and supercritical water
567.
Structure formation of regenerated cellulose materials from NMMO-solutions
Fink H.-., Weigel P., Purz H.J., Ganster J.
Progress in Polymer Science , 2001
568.
Tailored Media for Homogeneous Cellulose Chemistry: Ionic Liquid/Co-Solvent Mixtures
Gericke M., Liebert T., Seoud O.A., Heinze T.
Macromolecular Materials and Engineering , 2011
569.
The Solvent Dimethyl Sulfoxide
Martin D., Weise A., Niclas H.-.
Angewandte Chemie - International Edition , 1967
570.
G.A.Petropavlovskii, A.M.Bochek, V.M.Shek. Khim. Drevesiny, 3 (1987)
571.
A Role of Coagulant in Structure Formation of Fibers and Films Spun from Cellulose Solutions
Kulichikhin V., Makarov I., Mironova M., Golova L., Vinogradov M., Shandryuk G., Levin I., Arkharova N.
Materials , 2020
572.
V.G.Kulichikhin, L.K.Golova, I.S.Makarov, M.I.Vinogradov, A.K.Berkovich, Y.V Golubev. J. Text. Eng. Fash. Technol., 3, 593 (2017)
573.
The Role of Isobutanol as a Precipitant of Cellulose Films Formed from N-Methylmorpholine N-Oxide Solutions: Phase State and Structural and Morphological Features
Makarov I.S., Golova L.K., Vinogradov M.I., Mironova M.V., Levin I.S., Bondarenko G.N., Shandryuk G.A., Arkharova N.A., Kulichikhin V.G.
Polymer Science - Series A , 2019
574.
Cellulose nanofibers prepared by theN-methylmorpholine-N-oxide method
Kulpinski P.
Journal of Applied Polymer Science , 2005
576.
Historical review on chitin and chitosan biopolymers
577.
Chitosan as an environment friendly biomaterial – a review on recent modifications and applications
Bakshi P.S., Selvakumar D., Kadirvelu K., Kumar N.S.
International Journal of Biological Macromolecules , 2020
578.
L.S.Gal'braikh. Khim. Volokna, 5, 21 (2005)
580.
P.K.Dutta, J.Duta, V.S.Tripathi. J. Sci. Ind. Res. (India), 63, 20 (2004)
581.
Chitosan Derivatives and Their Application in Biomedicine
Wang W., Meng Q., Li Q., Liu J., Zhou M., Jin Z., Zhao K.
International Journal of Molecular Sciences , 2020
582.
Chemical Modification of Chitosan. 14: Synthesis of Water-Soluble Chitosan Derivatives by Simple Acetylation
Sashiwa H., Kawasaki N., Nakayama A., Muraki E., Yamamoto N., Aiba S.
Biomacromolecules , 2002
583.
Tailoring the Chemical Modification of Chitosan Hydrogels to Fine-Tune the Release of a Synergistic Combination of Chemotherapeutics
Schneible J.D., Singhal A., Lilova R.L., Hall C.K., Grafmüller A., Menegatti S.
Biomacromolecules , 2019
585.
Modified chitosan hydrogels as drug delivery and tissue engineering systems: present status and applications
Giri T.K., Thakur A., Alexander A., Ajazuddin, Badwaik H., Tripathi D.K.
Acta Pharmaceutica Sinica B , 2012
586.
Enzymatic modification of chitosan by cinnamic acids: Antibacterial activity against Ralstonia solanacearum
Yang C., Zhou Y., Zheng Y., Li C., Sheng S., Wang J., Wu F.
International Journal of Biological Macromolecules , 2016
588.
Functionalized and graft copolymers of chitosan and its pharmaceutical applications
Bhavsar C., Momin M., Gharat S., Omri A.
Expert Opinion on Drug Delivery , 2016
589.
Robust Airlike Superhydrophobic Surfaces
Shieh J., Hou F.J., Chen Y.C., Chen H.M., Yang S.P., Cheng C.C., Chen H.L.
Advanced Materials , 2010
593.
Multifunctional Hybrid Fabrics with Thermally Stable Superhydrophobicity
Lim H.S., Baek J.H., Park K., Shin H.S., Kim J., Cho J.H.
Advanced Materials , 2010
594.
Super water-repellent poly(alkylpyrrole) films having environmental stability
Kurogi K., Yan H., Mayama H., Tsujii K.
Journal of Colloid and Interface Science , 2007
595.
Mercury Ion Responsive Wettability and Oil/Water Separation
Xu L., Liu N., Cao Y., Lu F., Chen Y., Zhang X., Feng L., Wei Y.
ACS applied materials & interfaces , 2014
596.
Polysquaramides: Rapid and stable humidity sensing for breath monitoring and morse code communication
Cao Q., Yu C., Cheng X., Sun W., He J., Li N., Li H., Chen D., Xu Q., Lu J.
Sensors and Actuators, B: Chemical , 2020
597.
Fluorine-Free Superhydrophobic Coatings with pH-induced Wettability Transition for Controllable Oil–Water Separation
Xu Z., Zhao Y., Wang H., Zhou H., Qin C., Wang X., Lin T.
ACS applied materials & interfaces , 2016
598.
The design and applications of superomniphobic surfaces
Kota A.K., Kwon G., Tuteja A.
NPG Asia Materials , 2014
601.
Emerging applications of stimuli-responsive polymer materials
Stuart M.A., Huck W.T., Genzer J., Müller M., Ober C., Stamm M., Sukhorukov G.B., Szleifer I., Tsukruk V.V., Urban M., Winnik F., Zauscher S., Luzinov I., Minko S.
Nature Materials , 2010
602.
Free radical graft copolymerization of nanofibrillated cellulose with acrylic monomers
Littunen K., Hippi U., Johansson L., Österberg M., Tammelin T., Laine J., Seppälä J.
Carbohydrate Polymers , 2011
603.
Grafting of cellulose by ring-opening polymerisation – A review
Carlmark A., Larsson E., Malmström E.
European Polymer Journal , 2012
604.
Toward tunable amphiphilic copolymers via CuAAC click chemistry of oligocaprolactones onto starch backbone
Uliniuc A., Popa M., Drockenmuller E., Boisson F., Leonard D., Hamaide T.
Carbohydrate Polymers , 2013
606.
Michael reaction of chitosan with various acryl reagents in water.
Sashiwa H., Yamamori N., Ichinose Y., Sunamoto J., Aiba S.
Biomacromolecules , 2003
607.
Chitosan Film Acylation and Effects on Biodegradability
Xu J., McCarthy S.P., Gross R.A., Kaplan D.L.
Macromolecules , 1996
609.
N.Hadjichristidis. Encycl. Polym. Sci. Technol., 6, 38 (2002)
610.
Graft polymerization of acrylamide on chitosan: Copolymer structure and properties
Mochalova A.E., Zaborshchikova N.V., Knyazev A.A., Smirnova L.A., Izvozchikova V.A., Medvedeva V.V., Semchikov Y.D.
Polymer Science - Series A , 2006
611.
Synthesis, characterization and antimicrobial activity of modified cellulose-graft-polyacrylonitrile with some aromatic aldehyde derivatives
El-Khouly A.S., Kenawy E., Safaan A.A., Takahashi Y., Hafiz Y.A., Sonomoto K., Zendo T.
Carbohydrate Polymers , 2011
613.
Poly(glycidyl methacrylate)/bacterial cellulose nanocomposites: Preparation, characterization and post-modification
Faria M., Vilela C., Mohammadkazemi F., Silvestre A.J., Freire C.S., Cordeiro N.
International Journal of Biological Macromolecules , 2019
614.
Synthesis and characterization of chitosan-g-glycidyl methacrylate with methyl methacrylate
Elizalde-Peña E.A., Flores-Ramirez N., Luna-Barcenas G., Vásquez-García S.R., Arámbula-Villa G., García-Gaitán B., Rutiaga-Quiñones J.G., González-Hernández J.
European Polymer Journal , 2007
617.
Modified Arabinoxylan-Based Films. Part B. Grafting of Omega-3 Fatty Acids by Oxygen Plasma and Electron Beam Irradiation
Péroval C., Debeaufort F., Seuvre A.-., Chevet B., Déspre D., Voilley A.
Journal of Agricultural and Food Chemistry , 2003
618.
The Effect of Plasma Electron Temperature on the Surface Properties of Super-Hydrophobic Cotton Fabrics
Xu L., Lai Y., Liu L., Yang L., Guo Y., Chang X., Shi J., Zhang R., Yu J.
Coatings , 2020
619.
Superhydrophobic behavior of lauryl methacrylate copolymers on the cotton fabric surface
Bryuzgin E.V., Klimov V.V., Le M.D., Nguyen T.H., Navrotskiy A.V., Novakov I.A.
Surface Innovations , 2017
620.
An investigation of the hydrophobic property stability of grafted polymeric coatings on a cellulose material surface
Klimov V.V., Bryuzgin E.V., Le M.D., Zelenova E.A., Nguyen T.H., Navrotskii A.V., Nishide H., Novakov I.A.
Polymer Science - Series D , 2016
624.
Characterization of epoxy thermosetting systems by differential scanning calorimetry
Galy J., Sabra A., Pascault J.
Polymer Engineering and Science , 1986
625.
Visualization of morphological features of chitosan microtubes during biodegradation
Babicheva T.S., Gegel N.O., Shipovskaya A.B.
Journal of Physics: Conference Series , 2017
626.
Excellent reusable chitosan/cellulose aerogel as an oil and organic solvent absorbent
Li Z., Shao L., Hu W., Zheng T., Lu L., Cao Y., Chen Y.
Carbohydrate Polymers , 2018
629.
The advances of polysaccharide-based aerogels: Preparation and potential application
Wang Y., Su Y., Wang W., Fang Y., Riffat S.B., Jiang F.
Carbohydrate Polymers , 2019
630.
Fabrication of superhydrophobic cellulose/chitosan composite aerogel for oil/water separation
Meng G., Peng H., Wu J., Wang Y., Wang H., Liu Z., Guo X.
Fibers and Polymers , 2017
631.
Chitosan-Based Aerogel Membrane for Robust Oil-in-Water Emulsion Separation
Chaudhary J.P., Vadodariya N., Nataraj S.K., Meena R.
ACS applied materials & interfaces , 2015
632.
M.P.Egorov, A.L.Maksimov, A.M.Muzafarov, N.E.Nifant'ev, A.Yu.Tsivadze. Vestn. Ross. Akad. Nauk, 92, 103 (2022)
633.
Disposable Polymer Packaging: A Problem without a Solution?
Yaroslavov A.A., Arzhakov M.S., Khokhlov A.R.
Herald of the Russian Academy of Sciences , 2022
634.
The evolution of waste-to-energy incineration: A review
Makarichi L., Jutidamrongphan W., Techato K.
Renewable and Sustainable Energy Reviews , 2018
636.
Landfill Impacts on the Environment— Review
637.
S.Shilkina. Russ. J. Resour. Conserv. Recycl., 7, 1 (2020)
638.
Use and disposal of disposable plastic packaging by retail chains and catering companies
Panasenkova E.Y., Gruzdeva O.E., Kuznetsova M.G.
XXI century Technosphere Safety , 2020
639.
S.Wong, R.Shanks. In Biodegrad. Polym. Blends Compos. from Renew. Resour. (Ed. L.Yu). (Hoboken: John Wiley & Sons, Inc., 2008). P. 303
640.
Rudolph N., Kiesel R., Aumnate C.
2017
641.
B.V.Naber. Tverdye Bytovye Otkhody, 20 (2015)
644.
V.V.Abramov, N.M.Chalaya. Tverdye Bytovye Otkhody, 21 (2021)
645.
Mechanical properties of composite materials based on waste plastic – A review
646.
Recycling polypropylene and polyethylene wastes in production of polyester based polymer mortars
Martínez-López M., Martínez-Barrera G., Salgado-Delgado R., Gencel O.
Construction and Building Materials , 2021
649.
Handbook of Plastics Recycling. (Ed. F.P.La Mantia). (Shrewsbury: Rapra Technology, 2002)
650.
I.S.Kornev, D.S.Khlopkov, Yu.P.Suchkov, P.A.Kozlovskii, V.F.Shvets, N.M.Yukhnov, I.V.Danilov, Yu.S.Strebkov. Khim. Proms. Segodnya, 18 (2010)
651.
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem S.M., Antelava A., Constantinou A., Manos G., Dutta A.
Journal of Environmental Management , 2017
654.
The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions
Dogu O., Pelucchi M., Van de Vijver R., Van Steenberge P.H., D'hooge D.R., Cuoci A., Mehl M., Frassoldati A., Faravelli T., Van Geem K.M.
Progress in Energy and Combustion Science , 2021
655.
Developments in the life cycle assessment of chemical recycling of plastic waste – A review
Davidson M.G., Furlong R.A., McManus M.C.
Journal of Cleaner Production , 2021
657.
K.O.Tukacheva, G.V.Il'inykh, N.N.Slyusar'. Byull. Nauk. Prakt., 4, 51 (2018)
658.
Catalytic pyrolysis of polyethylene waste with Fuller’s earth clay and metal oxides under mild conditions
Mehdi M.S., Mehran M.T., Naqvi S.R., Zaman S.U., Khoja A.H., Bahadar A.
Materials Today: Proceedings , 2022
659.
Green materials synthesis with supercritical water
Adschiri T., Lee Y., Goto M., Takami S.
Green Chemistry , 2011
660.
Reactions of polymers in supercritical fluids for chemical recycling of waste plastics
662.
663.
Subcritical and supercritical water for chemical recycling of plastic waste
Queiroz A., Pedroso G.B., Kuriyama S.N., Fidalgo-Neto A.A.
Current Opinion in Green and Sustainable Chemistry , 2020
664.
Chemical recycling of PET : A stepping‐stone toward sustainability
Shojaei B., Abtahi M., Najafi M.
Polymers for Advanced Technologies , 2020
665.
Kinetics and Thermodynamics of Hydrolytic Depolymerization of Polyurethane Foam at Higher Temperature and Pressure
Mishra S., Zope V.S., Kulkarni R.D.
Polymer-Plastics Technology and Engineering , 2004
666.
Kinetics of Hydrolytic Depolymerization of Melt Poly(ethylene terephthalate)
Kao C., Wan B., Cheng W.
Industrial & Engineering Chemistry Research , 1998
669.
Recycling of Polyethylene Terephthalate Using High-pressure Steam Treatment
Noritake A., Hori M., Shigematsu M., Tanahashi M.
Polymer Journal , 2008
670.
A kinetic study of the hydrolytic degradation of polyethylene terephthalate at high temperatures
Campanelli J.R., Kamal M.R., Cooper D.G.
Journal of Applied Polymer Science , 1993
671.
Depolymerization of poly(ethylene terephthalate) in dilute aqueous ammonia solution under hydrothermal conditions
676.
Monomer recovery of waste plastics by liquid phase decomposition and polymer synthesis
677.
Decomposition of polycarbonate in subcritical and supercritical water
Tagaya H., Katoh K., Kadokawa J., Chiba K.
Polymer Degradation and Stability , 1999
678.
Chemical recycling of polycarbonate in high pressure high temperature steam at 573 K
Watanabe M., Matsuo Y., Matsushita T., Inomata H., Miyake T., Hironaka K.
Polymer Degradation and Stability , 2009
679.
Hydrolytic degradation of monomer casting nylon in subcritical water
Wang W., Meng L., Huang Y.
Polymer Degradation and Stability , 2014
680.
Hydrolysis of waste monomer casting nylon catalyzed by solid acids
Wang W., Meng L., Leng K., Huang Y.
Polymer Degradation and Stability , 2017
681.
Recycling of aramid fiber using subcritical and supercritical water
Okajima I., Okamoto H., Sako T.
Polymer Degradation and Stability , 2019
682.
Thermal degradation of PVC: A review
Yu J., Sun L., Ma C., Qiao Y., Yao H.
Waste Management , 2016
683.
Decomposition of Ployvinylchloride using Supercritical Water
Sato Y., Kato K., Takeshita Y., Takahashi K., Nishi S.
Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes , 1998
685.
K.Liu, F.-S.Zhang. J. Hazard. Mater., 316, 19 (2016)
686.
A novel safety treatment strategy of DEHP-rich flexible polyvinyl chloride waste through low-temperature critical aqueous ammonia treatment
687.
Characteristics and kinetics of degradation of polystyrene in supercritical water
Kwak H., Shin H.-., Bae S.-., Kumazawa H.
Journal of Applied Polymer Science , 2006
691.
Co-pyrolysis of residual oil and polyethylene in sub- and supercritical water
Bai F., Zhu C., Liu Y., Yuan P., Cheng Z., Yuan W.
Fuel Processing Technology , 2013
692.
Investigation on degradation of polyethylene to oils in supercritical water
Su X., Zhao Y., Zhang R., Bi J.
Fuel Processing Technology , 2004
694.
Use of Supercritical Water for the Liquefaction of Polypropylene into Oil
Chen W., Jin K., Linda Wang N.
ACS Sustainable Chemistry and Engineering , 2019
695.
Effect of Increasing Course of Temperature and Pressure on Polypropylene Degradation in Supercritical Water
SU L., WU X., LIU X., CHEN L., CHEN K., HONG S.
Chinese Journal of Chemical Engineering , 2007
696.
A Critical Review of SCWG in the Context of Available Gasification Technologies for Plastic Waste
Ciuffi B., Chiaramonti D., Rizzo A.M., Frediani M., Rosi L.
Applied Sciences (Switzerland) , 2020
697.
Permanganate-Induced Efficient Mineralization of Poly(vinylidene fluoride) and Vinylidene-Fluoride Based Copolymers in Low-Temperature Subcritical Water
Honma R., Hori H., da Cunha F.R., Horiike N., Steinbach L., Ameduri B.
Industrial & Engineering Chemistry Research , 2019
698.
Hydrogen Peroxide Induced Efficient Mineralization of Poly(vinylidene fluoride) and Related Copolymers in Subcritical Water
Hori H., Tanaka H., Watanabe K., Tsuge T., Sakamoto T., Manseri A., Ameduri B.
Industrial & Engineering Chemistry Research , 2015
700.
Hydrothermal Treatment of E-Waste Plastics for Tertiary Recycling: Product Slate and Decomposition Mechanisms
Zhao X., Xia Y., Zhan L., Xie B., Gao B., Wang J.
ACS Sustainable Chemistry and Engineering , 2018
703.
Decomposition reactions of epoxy resin and polyetheretherketone resin in sub- and supercritical water
Shibasaki Y., Kadokawa J., Tagaya H., Hatano B., Kato C.
Journal of Material Cycles and Waste Management , 2004
704.
Decomposition of Prepolymers and Molding Materials of Phenol Resin in Subcritical and Supercritical Water under an Ar Atmosphere
Suzuki Y., Tagaya H., Asou T., Kadokawa J., Chiba K.
Industrial & Engineering Chemistry Research , 1999
706.
Hydrolysis and Oxidation of an Epoxy Resin in Sub- and Supercritical Water
Fromonteil C., Bardelle P., Cansell F.
Industrial & Engineering Chemistry Research , 2000
707.
Decomposition reactions of plastic model compounds in sub- and supercritical water
Shibasaki Y., Kamimori T., Kadokawa J., Hatano B., Tagaya H.
Polymer Degradation and Stability , 2004
709.
Depolymerization of Styrene−Butadiene Copolymer in Near-Critical and Supercritical Water
Park Y., Hool J.N., Curtis C.W., Roberts C.B.
Industrial & Engineering Chemistry Research , 2001
711.
Effect of diaminotoluene on the decomposition of polyurethane foam waste in superheated water
Dai Z., Hatano B., Kadokawa J., Tagaya H.
Polymer Degradation and Stability , 2002
712.
Depolymerization of tire and natural rubber using supercritical fluids
Chen D.T., Perman C.A., Riechert M.E., Hoven J.
Journal of Hazardous Materials , 1995
714.
Conversion of Tire Waste Using Subcritical and Supercritical Water Oxidation
Park Y., Reaves J.T., Curtis C.W., Roberts C.B.
Journal of Elastomers and Plastics , 1999
715.
Catalytic subcritical and supercritical water gasification as a resource recovery approach from waste tires for hydrogen-rich syngas production
723.
A Novel Process for Detoxification of BERs in Waste PCBs
Xing M., Zhang F.
Procedia Environmental Sciences , 2012
725.
Chemical Recycling of Printed Circuit Board Waste by Depolymerization in Sub- and Supercritical Solvents
729.
Production of acetic acid from liquid crystal display waste by use of a hydrothermal method
Zhuang X., Ye Y., He W., Li G., Huang J., Lu S.
Research on Chemical Intermediates , 2012
735.
Recycling of carbon fiber reinforced plastic containing amine-cured epoxy resin using supercritical and subcritical fluids
Okajima I., Watanabe K., Haramiishi S., Nakamura M., Shimamura Y., Sako T.
Journal of Supercritical Fluids , 2017
736.
Mechanothermal and chemical recycling methodologies for the Fibre Reinforced Plastic (FRP)
Gharde S., Kandasubramanian B.
Environmental Technology and Innovation , 2019
738.
Semi-continuous flow recycling method for carbon fibre reinforced thermoset polymers by near- and supercritical solvolysis
Henry L., Schneller A., Doerfler J., Mueller W.M., Aymonier C., Horn S.
Polymer Degradation and Stability , 2016
739.
Application of supercritical water for green recycling of epoxy-based carbon fiber reinforced plastic
Kim Y.N., Kim Y., Kim S.Y., Park M., Yang B., Kim J., Jung Y.C.
Composites Science and Technology , 2019
741.
Recycling of Carbon Fiber Reinforced Plastics Using Subcritical Water
Okajima I., Hiramatsu M., Sako T.
Advanced Materials Research , 2011
742.
Carbon fiber recovery using water and benzyl alcohol in subcritical and supercritical conditions for chemical recycling of thermoset composite materials
Morales Ibarra R., Sasaki M., Goto M., Quitain A.T., García Montes S.M., Aguilar-Garib J.A.
Journal of Material Cycles and Waste Management , 2014
745.
Accelerated degradation of Polyetheretherketone (PEEK) composite materials for recycling applications
Dandy L.O., Oliveux G., Wood J., Jenkins M.J., Leeke G.A.
Polymer Degradation and Stability , 2015
748.
Recycling of woven carbon-fibre-reinforced polymer composites using supercritical water
Knight C.C., Zeng C., Zhang C., Wang B.
Environmental Technology (United Kingdom) , 2011
752.
Environmental Feasibility of the Recycling of Carbon Fibers from CFRPs by Solvolysis Using Supercritical Water
Prinçaud M., Aymonier C., Loppinet-Serani A., Perry N., Sonnemann G.
ACS Sustainable Chemistry and Engineering , 2014
754.
Study on methanolytic depolymerization of PET with supercritical methanol for chemical recycling
755.
Recovery of Constituent Monomers from Polyethylene Terephthalate with Supercritical Methanol
Sako T., Okajima I., Sugeta T., Otake K., Yoda S., Takebayashi Y., Kamizawa C.
Polymer Journal , 2000
756.
Sako T., Sugeta T., Otake K., Nakazawa N., Sato M., Namiki K., Tsugumi M.
Journal of Chemical Engineering of Japan , 2005
760.
Depolymerization of polyethyleneterephthalate in supercritical methanol
Kim B.-., Hwang G.-., Bae S.-., Yi S.-., Kumazawa H.
Journal of Applied Polymer Science , 2001
761.
Kim B., Kim D., Cho Y., Han M.
Journal of Chemical Engineering of Japan , 2008
764.
PET and aluminum recycling from multilayer food packaging using supercritical ethanol
Fávaro S.L., Freitas A.R., Ganzerli T.A., Pereira A.G., Cardozo A.L., Baron O., Muniz E.C., Girotto E.M., Radovanovic E.
Journal of Supercritical Fluids , 2013
765.
Depolymerization of poly(ethylene terephthalate) wastes using ethanol and ethanol/water in supercritical conditions
De Castro R.E., Vidotti G.J., Rubira A.F., Muniz E.C.
Journal of Applied Polymer Science , 2006
766.
Alcoholysis of poly(ethylene terephthalate) to produce dioctyl terephthalate with sub- and super-critical isooctyl alcohol
Liu F., Chen J., Li Z., Ni P., Ji Y., Meng Q.
Journal of Analytical and Applied Pyrolysis , 2013
767.
Kinetics of alcoholysis of poly(ethylene terephthalate) in sub- and super-critical isooctyl alcohol to produce dioctyl terephthalate
769.
Depolymerization Mechanism of Poly(ethylene terephthalate) in Supercritical Methanol
Genta M., Iwaya T., Sasaki M., Goto M., Hirose T.
Industrial & Engineering Chemistry Research , 2005
771.
Depolymerization of polyethylene terephthalate in supercritical methanol
Goto M., Koyamoto H., Kodama A., Hirose T., Nagaoka S.
Journal of Physics Condensed Matter , 2002
772.
Degradation kinetics of polyethylene terephthalate in supercritical methanol
Goto M., Koyamoto H., Kodama A., Hirose T., Nagaoka S., McCoy B.J.
AICHE Journal , 2002
774.
Degradation of poly(butylene terephthalate) in different supercritical alcohol solvents
Yang J., Huang J., Chyu M.K., Wang Q., Xiong D., Zhu Z.
Journal of Applied Polymer Science , 2010
775.
Decomposition of Polyethylene 2,6-Naphthalene Dicarboxylate to Constituent Monomers Using Supercritical Methanol
Sako T., Sugeta T., Otake K., Yoda S., Takebayashi Y., Okajima I., Kamizawa C.
Polymer Journal , 1999
777.
M.Genta, F.Yano, Y.Kondo, W.Matsubara, S.Oomoto. Mitsubishi Heavy Ind. Ltd., Tech. Rev., 40, 1 (2003)
779.
Nonstationary model of the semicontinuous depolymerization of polycarbonate
Piñero-Hernanz R., García-Serna J., Cocero M.J.
AICHE Journal , 2006
780.
Study on depolymerization of polycarbonate in supercritical ethanol
Jie H., Ke H., Qing Z., Lei C., Yongqiang W., Zibin Z.
Polymer Degradation and Stability , 2006
781.
Direct conversion of polyamides to ω-hydroxyalkanoic acid derivatives by using supercritical MeOH
Kamimura A., Kaiso K., Suzuki S., Oishi Y., Ohara Y., Sugimoto T., Kashiwagi K., Yoshimoto M.
Green Chemistry , 2011
782.
Efficient Conversion of Polyamides to ω-Hydroxyalkanoic Acids: A New Method for Chemical Recycling of Waste Plastics
Kamimura A., Ikeda K., Suzuki S., Kato K., Akinari Y., Sugimoto T., Kashiwagi K., Kaiso K., Matsumoto H., Yoshimoto M.
ChemSusChem , 2014
783.
Efficient depolymerization and chemical conversion of polyamide 66 to 1,6-hexanediol
Matsumoto H., Akinari Y., Kaiso K., Kamimura A.
Journal of Material Cycles and Waste Management , 2015
784.
Thermal decomposition of polystyrene in supercritical methanol
Shin H., Bae S.
Journal of Applied Polymer Science , 2008
785.
Co-liquefaction of microalgae and synthetic polymer mixture in sub- and supercritical ethanol
Pei X., Yuan X., Zeng G., Huang H., Wang J., Li H., Zhu H.
Fuel Processing Technology , 2012
786.
A kinetic study of the decross-linking of cross-linked polyethylene in supercritical methanol
Lee H., Jeong J.H., Cho H., Koo C.M., Hong S.M., Kim H., Lee Y.
Polymer Degradation and Stability , 2008
788.
Okajima I., Katsuzaki A., Goto T., Yamazaki T., Sako T.
Journal of Chemical Engineering of Japan , 2010
789.
Foaming of recycled crosslinked polyethylenes via supercritical decrosslinking reaction
Kwon Y.J., Park W.Y., Hong S.M., Koo C.M.
Journal of Applied Polymer Science , 2012
790.
Use of Single-Screw Extruder for Continuous Silane Cross-Linked Polyethylene Recycling Process Using Supercritical Alcohol
Goto T., Ashihara S., Kato M., Okajima I., Sako T.
Industrial & Engineering Chemistry Research , 2012
791.
Continuous supercritical decrosslinking extrusion process for recycling of crosslinked polyethylene waste
Baek B.K., Shin J.W., Jung J.Y., Hong S.M., Nam G.J., Han H., Koo C.M.
Journal of Applied Polymer Science , 2014
792.
A kinetic study on the supercritical decrosslinking reaction of silane-crosslinked polyethylene in a continuous process
Baek B.K., La Y.H., Na W.J., Lee S.H., Hong S.M., Han H., Lee Y., Nam G.J., Koo C.M.
Polymer Degradation and Stability , 2016
793.
Decrosslinking reaction kinetics of silane-crosslinked polyethylene in sub- and supercritical fluids
Baek B.K., La Y.H., Lee A.S., Han H., Kim S.H., Hong S.M., Koo C.M.
Polymer Degradation and Stability , 2016
794.
Continuous Process for Recycling Silane Cross-Linked Polyethylene Using Supercritical Alcohol and Extruders
Goto T., Ashihara S., Yamazaki T., Okajima I., Sako T., Iwamoto Y., Ishibashi M., Sugeta T.
Industrial & Engineering Chemistry Research , 2011
795.
Methanolysis investigation of commercially available polyurethane foam
Asahi N., Sakai K., Kumagai N., Nakanishi T., Hata K., Katoh S., Moriyoshi T.
Polymer Degradation and Stability , 2004
796.
Performance of supercritical methanol in polyurethane degradation
Liu L., Tang L., Zhu Z., Ni Y., Wu Y.
MATEC Web of Conferences , 2016
797.
Chemical Recycling of Phenol Resin by Supercritical Methanol
Ozaki J., Djaja S.K., Oya A.
Industrial & Engineering Chemistry Research , 2000
799.
Recycling of resin cured IIR-based ground bladder rubber with the assistance of subcritical fluids
Zhang T., Xing Z., Zhang L., Zhang Y.
Journal of Elastomers and Plastics , 2018
801.
Effective Depolymerization Waste FRPs by Treatment with DMAP and Supercritical Alcohol
Kamimura A., Yamada K., Kuratani T., Taguchi Y., Tomonaga F.
Chemistry Letters , 2006
802.
Formation of recycled plastics from depolymerized monomers derived from waste fiber-reinforced plastics
Kamimura A., Konno E., Yamamoto S., Watanabe T., Yamada K., Tomonaga F.
Journal of Material Cycles and Waste Management , 2009
804.
An additive manufacturing-based approach for carbon fiber reinforced polymer recycling
805.
Degradation Mechanism of CF/EP Composites in Supercritical n-Butanol with Alkali Additives
Huang H., Yin Y., Cheng H., Zhao Z., Zhang B.
Journal of Polymers and the Environment , 2016
806.
Recovery and characterisation of carbon fibres from waste CFRP using supercritical n-butanol
Cheng H., Huang H., Zhang B., Zhang J.
International Journal of Sustainable Engineering , 2018
807.
Reaction Kinetics of CFRP Degradation in Supercritical Fluids
Cheng H., Huang H., Liu Z., Zhang J.
Journal of Polymers and the Environment , 2017
808.
Degradation of carbon fiber-reinforced polymer using supercritical fluids
Cheng H., Huang H., Zhang J., Jing D.
Fibers and Polymers , 2017
809.
Characterisation of carbon fibres recycled from carbon fibre/epoxy resin composites using supercritical n-propanol
JIANG G., PICKERING S., LESTER E., TURNER T., WONG K., WARRIOR N.
Composites Science and Technology , 2009
810.
Recycling of carbon fibers in epoxy resin composites using supercritical 1-propanol
Yan H., Lu C., Jing D., Chang C., Liu N., Hou X.
New Carbon Materials , 2016
812.
DMAP as an Effective Catalyst To Accelerate the Solubilization of Waste Fiber-Reinforced Plastics
Kamimura A., Yamada K., Kuratani T., Oishi Y., Watanabe T., Yoshida T., Tomonaga F.
ChemSusChem , 2008
814.
Chemical recycling of carbon fiber reinforced plastic using supercritical methanol
Okajima I., Hiramatsu M., Shimamura Y., Awaya T., Sako T.
Journal of Supercritical Fluids , 2014
815.
Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions
Piñero-Hernanz R., García-Serna J., Dodds C., Hyde J., Poliakoff M., Cocero M.J., Kingman S., Pickering S., Lester E.
Journal of Supercritical Fluids , 2008
817.
H.U.Sokoli, E.G.Scgaard. Chem. Eng. Trans., 43, 967 (2015)
818.
H.Cheng, W.Liu, H.Huang, Z.Liu. Int. J.Chem. React. Eng., 17, 20190048 (2019)
821.
Investigation of degradation products produced by recycling the solvent during chemical degradation of fiber-reinforced composites
822.
Conversion of the matrix in glass fiber reinforced composites into a high heating value oil and other valuable feedstocks
Sokoli H.U., Simonsen M.E., Nielsen R.P., Arturi K.R., Søgaard E.G.
Fuel Processing Technology , 2016
824.
Recycling fiber-reinforced plastic using supercritical acetone
826.
Optimized process for recovery of glass- and carbon fibers with retained mechanical properties by means of near- and supercritical fluids
Sokoli H.U., Beauson J., Simonsen M.E., Fraisse A., Brøndsted P., Søgaard E.G.
Journal of Supercritical Fluids , 2017
827.
G.C.Hwang, B.K.Kim, S.Y.Bae, S.C.Yi, H.Kumazawa. J. Ind. Eng. Chem., 5, 150 (1999)
828.
Kinetics of the degradation of polystyrene in supercritical acetone
Oh S.C., Han D.I., Kwak H., Bae S., Lee K.
Polymer Degradation and Stability , 2007
829.
Oh S.C., Kwak H., Bae S.
Journal of Chemical Engineering of Japan , 2006
830.
Degradation of high density polyethylene, polypropylene and their mixtures in supercritical acetone
Hwang G.C., Kim K.H., Bae S.Y., Yi S.C., Kumazawa H.
Korean Journal of Chemical Engineering , 2001
833.
Chemical recycling of polyurethanes and separation of the components by supercritical ammonia
Lentz H., Mormann W.
Makromolekulare Chemie Macromolecular Symposia , 1992
835.
(Supercritical) Ammonia for Recycling of Thermoset Polymers
Mormann W., Frank P.
Macromolecular Symposia , 2006
837.
Chemical recycling of polycarbonate in dilute aqueous ammonia solution under hydrothermal conditions
Hatakeyama K., Kojima T., Funazukuri T.
Journal of Material Cycles and Waste Management , 2013
839.
Degradation of polystyrene in supercritical n-Hexane
Hwang G., Choi J., Bae S., Kumazawa H.
Korean Journal of Chemical Engineering , 2001
840.
Thermo-Catalytic Versus Thermo-Chemical Recycling of Polystyrene Waste
Abdel-Raouf M.E., Mahmoud Abdel-Raheim A.R., El-Saeed S.M.
Waste and Biomass Valorization , 2012
841.
Thermal degradation of polystyrene wastes in various solvents
Karaduman A., Şimşek E.H., Çiçek B., Bilgesü A.Y.
Journal of Analytical and Applied Pyrolysis , 2002
842.
Solvent effect on thermal degradation of polystyrene
Sato S., Murakata T., Baba S., Saito Y., Watanabe S.
Journal of Applied Polymer Science , 1990
843.
Solvent effect on thermal degradation of polystyrene and poly-α-methylstyrene
Murakata T., Saito Y., Yosikawa T., Suzuki T., Sato S.
Polymer , 1993
844.
HDPE chemical recycling promoted by phenol solvent
Vicente G., Aguado J., Serrano D.P., Sánchez N.
Journal of Analytical and Applied Pyrolysis , 2009
846.
Depolymerization Reactions of cis-Polyisoprene and Scrap Rubber in Supercritical Toluene
847.
Thermolysis of scrap tire using supercritical toluene
Joung S.N., Park S.W., Kim S.Y., Yoo K., Bae S.Y.
Korean Journal of Chemical Engineering , 1999
848.
S.B.Lee, I.K.Hong. J. Ind. Eng. Chem., 4, 26 (1998)
849.
Phase behavior and kinetics of polystyrene degradation in supercritical toluene
Jie H., Ke H., Lihua T., Jiachun W., Zibin Z., Weiyong Y.
Journal of Applied Polymer Science , 2008
850.
Continuous distribution kinetics for degradation of polystyrene in sub- and supercritical toluene
Huang K., Tang L., Zhu Z., Ying W.
Journal of Analytical and Applied Pyrolysis , 2006
851.
K.Huang, L.H.Tang, Z.Bin Zhu, C.F.Zhang. Polym. Degrad. Stab., 89, 312 (2005)
852.
Sub- and supercritical D-limonene technology as a green process to recover glass fibres from glass fibre-reinforced polyester composites
Souza P.R., Nunes C.S., Freitas A.R., Belinato J.R., Pilau E.J., Fajardo A.R., da Silva Filho E.A., Schreiner W.H., Muniz E.C.
Journal of Cleaner Production , 2020
853.
Chemical degradation of carbon fiber reinforced bismaleimide resin composites to recover carbon fiber and nitrogen doped carbon materials
855.
Effective Depolymerization of Nylon-6 in Wet Supercritical Hydrocarbons
Kaiso K., Sugimoto T., Kashiwagi K., Kamimura A.
Chemistry Letters , 2011
856.
Direct liquefaction of waste plastics and coliquefaction of coal-plastic mixtures
Feng Z., Zhao J., Rockwell J., Bailey D., Huffman G.
Fuel Processing Technology , 1996
858.
Development of first-stage co-liquefaction of Chinese coal with waste plastics
Wang L., Chen P.
Chemical Engineering and Processing: Process Intensification , 2004
859.
Catalytic coprocessing of waste plastics and petroleum residue into liquid fuel oils
Siddiqui M.N., Redhwi H.H.
Journal of Analytical and Applied Pyrolysis , 2009
860.
Thermal and catalytic degradation of commingled plastics
Ibrahim M.M., Hopkins E., Seehra M.S.
Fuel Processing Technology , 1996
863.
10.1021/ef960076+
865.
T.Karayildirim, J.Yanik, S.Ucar, M.Saglam, M.Yuksel. Fuel Process. Technol., 73, 23 (2001)
866.
Hydrocracking of virgin and waste plastics: A detailed review
Munir D., Irfan M.F., Usman M.R.
Renewable and Sustainable Energy Reviews , 2018
867.
Supercritical fluids in chemistry
Alekseev E.S., Alentiev A.Y., Belova A.S., Bogdan V.I., Bogdan T.V., Bystrova A.V., Gafarova E.R., Golubeva E.N., Grebenik E.A., Gromov O.I., Davankov V.A., Zlotin S.G., Kiselev M.G., Koklin A.E., Kononevich Y.N., et. al.
Russian Chemical Reviews , 2020
868.
Challenges and opportunities of solvent-based additive extraction methods for plastic recycling
Ügdüler S., Van Geem K.M., Roosen M., Delbeke E.I., De Meester S.
Waste Management , 2020
870.
A.P.Sanchez-Camargo, J.A.Mendiola, E.Ibanez, M.Herrero. In Ref. Modul. Chem. Mol. Sci. Chem. Eng. Elsevier, 2014. P. 196
871.
Supercritical fluid extraction (SFE) in food analysis: A review
Anklam E., Berg H., Mathiasson L., Sharman M., Ulberth F.
Food Additives & Contaminants , 1998
874.
Clinical solid waste management practices and its impact on human health and environment – A review
875.
Modeling the inactivation of Staphylococcus aureus and Serratia marcescens in clinical solid waste using supercritical fluid carbon dioxide
876.
Optimizing supercritical carbon dioxide in the inactivation of bacteria in clinical solid waste by using response surface methodology
Hossain M.S., Nik Ab Rahman N.N., Balakrishnan V., F.M. Alkarkhi A., Ahmad Rajion Z., Ab Kadir M.O.
Waste Management , 2015
878.
Swelling and sorption in polymer–CO2 mixtures at elevated pressures
Wissinger R.G., Paulaitis M.E.
Journal of Polymer Science, Part B: Polymer Physics , 1987
879.
Critical ReviewAnalytical Extraction of Additives From Polymers
Vandenburg H.J., Clifford A.A., Bartle K.D., Carroll J., Newton I., Garden L.M., Dean J.R., Costley C.T.
The Analyst , 1997
880.
How Entrainers Enhance Solubility in Supercritical Carbon Dioxide
Shimizu S., Abbott S.
Journal of Physical Chemistry B , 2016
885.
An Alternative Method for Determination of Additives in Polypropylene Using Supercritical Fluid Extraction and Enhanced Solvent Extraction
De Paepe A., Erlandsson B., Östelius J., Gasslander U., Arbin A.
Journal of Liquid Chromatography and Related Technologies , 2006
886.
Analysis of antioxidants extracted from polypropylene by supercritical fluid extraction
887.
10.1002/(SICI)1097-4628(20000509)76:6<938::AID-APP21>3.0.CO;2-A
890.
10.1002/(SICI)1521-4168(19991001)22:10<553::AID-JHRC553>3.0.CO;2-E
892.
Purification of post-consumer polyolefins via supercritical CO2 extraction for the recycling in food contact applications
Anouar B.S., Guinot C., Ruiz J., Charton F., Dole P., Joly C., Yvan C.
Journal of Supercritical Fluids , 2015
894.
Supercritical extraction of volatile organic components from polyethylene pellets
Cristancho D.E., Guzman J.D., Taylor C., Ortiz-Vega D., Acosta H., Hall K.R.
Journal of Supercritical Fluids , 2012
896.
Assessment of Supercritical CO2 Extraction as a Method for Plastic Waste Decontamination
Alassali A., Aboud N., Kuchta K., Jaeger P., Zeinolebadi A.
Polymers , 2020
899.
Supercritical fluid extraction and chromatography for the determination of oligomers in poly(ethylene terephthalate) films
Bartle K.D., Boddington T., Clifford A.A., Cotton N.J., Dowle C.J.
Analytical Chemistry , 1991
900.
Analysis of low molecular weight constituents of polypropylene and other polymeric materials using on-line SFE-SFC
Cotton N.J., Bartle K.D., Clifford A.A., Ashraf S., Moulder R., Dowle C.J.
Journal of High Resolution Chromatography , 1991
904.
Effects of Modifier Addition and Temperature Variation in SFE of Polymeric Materials
Lou X., Janssen H.-., Cramers C.A.
Journal of Chromatographic Science , 1996
910.
C.Gutierrez, M.T.Garcia, I.Gracia, A.de Lucas, J.F.Rodriguez. J. Mater. Cycles Waste Manag., 14, 308 (2012)
911.
Measurement and Modeling of Supercritical Fluid Extraction from Polymeric Matrices
Dooley K.M., Launey D., Becnel J.M., Caines T.L.
ACS Symposium Series , 1995
912.
Effect of SFE Flow Rate on Extraction Rates: Classifying Sample Extraction Behavior
Hawthorne S.B., Galy A.B., Schmitt V.O., Miller D.J.
Analytical Chemistry , 1995
913.
Effective recovery of perfluoropolyether surfactants from PVDF and PTFE by supercritical carbon dioxide extraction
914.
Supercritical-fluid extraction of chlorofluoroalkanes from rigid polyurethane foams
Filardo G., Galia A., Gambino S., Silvestri G., Poidomani M.
Journal of Supercritical Fluids , 1996
917.
Extraction of brominated flame retardents with supercritical CO2
Bunte G., Härdle T., Krause H., Marioth E.
High Pressure Chemical Engineering, Proceedings of the 3rd International Symposium on High Pressure Chemical Engineering , 1996
918.
On-line spectroscopic study of brominated flame retardant extraction in supercritical CO2
Xia D., Maurice A., Leybros A., Lee J., Grandjean A., Gabriel J.P.
Chemosphere , 2021
920.
Solubility Studies of Organic Flame Retardants in Supercritical CO2
Gamse T., Steinkellner F., Marr R., Alessi P., Kikic I.
Industrial & Engineering Chemistry Research , 2000
921.
10.1002/1522-2640(200106)73:6<590::AID-CITE5901111>3.0.CO;2-S
922.
Extraction of flame retardants from electronic printed circuit board by supercritical carbon dioxide
923.
Supercritical extraction of polymers from printed circuit boards using CO2 and ethanol
Calgaro C.O., Schlemmer D.F., Bassaco M.M., Dotto G.L., Tanabe E.H., Bertuol D.A.
Journal of CO2 Utilization , 2017
924.
Understanding and optimizing delamination/recycling of printed circuit boards using a supercritical carbon dioxide process
Sanyal S., Ke Q., Zhang Y., Ngo T., Carrell J., Zhang H., Dai L.L.
Journal of Cleaner Production , 2013
926.
Fast copper extraction from printed circuit boards using supercritical carbon dioxide
Calgaro C.O., Schlemmer D.F., da Silva M.D., Maziero E.V., Tanabe E.H., Bertuol D.A.
Waste Management , 2015
927.
Recovery of cobalt from spent lithium-ion batteries using supercritical carbon dioxide extraction
Bertuol D.A., Machado C.M., Silva M.L., Calgaro C.O., Dotto G.L., Tanabe E.H.
Waste Management , 2016
928.
Supercritical CO2 extraction of indium present in liquid crystal displays from discarded cell phones using organic acids
Argenta A.B., Reis C.M., Mello G.P., Dotto G.L., Tanabe E.H., Bertuol D.A.
Journal of Supercritical Fluids , 2017
931.
Supercritical carbon dioxide extraction of lithium-ion battery electrolytes
Grützke M., Kraft V., Weber W., Wendt C., Friesen A., Klamor S., Winter M., Nowak S.
Journal of Supercritical Fluids , 2014
932.
S.Rothermel, M.Grutzke, X.Monnighoff, M.Winter, S.Nowak. In Recycling of Lithium-Ion Batteries: The LithoRec Way (Sustainable Production, Life Cycle Engineering and Management). (Eds A.Kwade, J.Diekmann). (Cham: Springer, 2018). P. 177
933.
Extraction of lithium-ion battery electrolytes with liquid and supercritical carbon dioxide and additional solvents
Grützke M., Mönnighoff X., Horsthemke F., Kraft V., Winter M., Nowak S.
RSC Advances , 2015
934.
Supercritical carbon dioxide extraction of electrolyte from spent lithium ion batteries and its characterization by gas chromatography with chemical ionization
Mönnighoff X., Friesen A., Konersmann B., Horsthemke F., Grützke M., Winter M., Nowak S.
Journal of Power Sources , 2017
935.
Supercritical carbon dioxide assisted extraction from the polycarbonate depolymerization mixture
Margon V., Agarwal U.S., Bailly C., de Wit G., van Kasteren J.M., Lemstra P.J.
Journal of Supercritical Fluids , 2006
937.
C.Gutierrez, J.F.Rodriguez, I.Gracia, A.de Lucas, M.T.Garcia. Polym. Plast. Technol. Eng., 55, 335 (2016)
940.
Separation and Recovery of Nylon from Carpet Waste Using a Supercritical Fluid Antisolvent Technique
Griffith A.T., Park Y., Roberts C.B.
Polymer-Plastics Technology and Engineering , 1999
941.
Drug loading of polymer implants by supercritical CO2 assisted impregnation: A review.
Champeau M., Thomassin J.-., Tassaing T., Jérôme C.
Journal of Controlled Release , 2015
945.
O.S.Fleming, S.G.Kazarian. In Supercritical Carbon Dioxide: In Polymer Reaction Engineering. (Eds M.F.Kemmere, T.Meyer). (Weinhei: Wiley-VCH Verlag GmbH & Co. KGaA, 2000). P. 205
946.
Supercritical impregnation of polymers
Kikic I., Vecchione F.
Current Opinion in Solid State and Materials Science , 2003
947.
Mechanisms Involved in the Recycling of NR and EPDM
Manuel H.J., van Duin M., Noordermeer J.W., van der Does L., Verbruggen M.A.
Rubber Chemistry and Technology , 1999
951.
Applications of Supercritical Carbon Dioxide in the Rubber Industry
Yaqoob A.A., Ibrahim M.N., Umar K., Ahmad A., Mohd. Setapar S.H.
Nanotechnology in the Life Sciences , 2020
952.
Recycling of rubber wastes by devulcanization
Asaro L., Gratton M., Seghar S., Aït Hocine N.
Resources, Conservation and Recycling , 2018
953.
Devulcanization of carbon black filled natural rubber using supercritical carbon dioxide
Kojima M., Tosaka M., Ikeda Y., Kohjiya S.
Journal of Applied Polymer Science , 2004
959.
Microcellular Structure of PP/Waste Rubber Powder Blends with Supercritical CO2 by Foam Extrusion Process
Xin Z.X., Zhang Z.X., Pal K., Kim K., Kang D.J., Kim J.K., Bang D.
Journal of Cellular Plastics , 2009
960.
Novel polymer composites from waste ethylene-propylene-diene-monomer rubber by supercritical CO2 foaming technology
963.
Recycling of poly(ethylene terephthalate) into closed-cell foams
Japon S., Leterrier Y., Månson J.E.
Polymer Engineering and Science , 2000
969.
Thermal oxidation of polypropylene catalyzed by manganese oxide aerogel in oxygen-enriched supercritical carbon dioxide
Elmanovich I.V., Stakhanov A.I., Zefirov V.V., Pavlov A.A., Lokshin B.V., Gallyamov M.O.
Journal of Supercritical Fluids , 2020
970.
Chemical recycling of polyethylene in oxygen-enriched supercritical CO2
Elmanovich I.V., Stakhanov A.I., Kravchenko E.I., Stakhanova S.V., Pavlov A.A., Ilyin M.M., Kharitonova E.P., Gallyamov M.O., Khokhlov A.R.
Journal of Supercritical Fluids , 2022
971.
Poly(ethylene terephthalate) waste and its utilisation: A review
Datye K.V., Raje H.M., Sharma N.D.
Resources and Conservation , 1984
972.
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
Koh J.J., Zhang X., He C.
International Journal of Biological Macromolecules , 2018
973.
An Overview of Polylactides as Packaging Materials
Auras R., Harte B., Selke S.
Macromolecular Bioscience , 2004
975.
Soil health and carbon management
Lal R.
Food and Energy Security , 2016
976.
N.B.Khitrov, A.L.Ivanov, A.A.Zavalin, M.S.Kuznetsov. Vestn. Agrar. Nauki, 9, 29 (2007)
977.
Biddoccu M., Guzmán G., Capello G., Thielke T., Strauss P., Winter S., Zaller J.G., Nicolai A., Cluzeau D., Popescu D., Bunea C., Hoble A., Cavallo E., Gómez J.A.
International Soil and Water Conservation Research , 2020
978.
D.N.K.V.Usharani, K.M.Roopashree. J. Pharmacogn. Phytochem., 8, 1256 (2019)
979.
Poor physical structural components restrict soil fertility and crop productivity for wheat–maize cropping
980.
S.K.K.Harichane, M.Ghrici, S.Kenai. Int. J. Civil Eng., 9, 90 (2011)
981.
Geopolymerization of soil by sodium silicate as an approach to control wind erosion
Koohestani B., Darban A.K., Mokhtari P., Darezereshki E., Yilmaz E.
International Journal of Environmental Science and Technology , 2020
982.
Synergistic chemical and microbial cementation for stabilization of aggregates
Porter H., Dhami N.K., Mukherjee A.
Cement and Concrete Composites , 2017
983.
Sand-filler structural material with a low content of polyethylene binder
Yi H., Oh K., Kou R., Qiao Y.
Sustainable Materials and Technologies , 2020
984.
Evaluation of Strength Properties of Sand Modified with Organic Polymers
Liu J., Bai Y., Song Z., Lu Y., Qian W., Kanungo D.
Polymers , 2018
985.
Chemical sand stabilization: A review of material, mechanism, and problems
Zang Y., Gong W., Xie H., Liu B., Chen H.
Environmental Technology Reviews , 2015
986.
Polyacrylamide in Agriculture and Environmental Land Management
Sojka R.E., Bjorneberg D.L., Entry J.A., Lentz R.D., Orts W.J.
Advances in Agronomy , 2007
987.
D.N.W.G.J.Levy. In Functional Polymers in Food Science. (Eds G.Cirillo, U.G.Spizzirri, F.Iemma). (Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015). P. 31
988.
R.M.A.M.G.Rao, P.Bharathi. Sci. Revs. Chem. Commun, 4, 61 (2014)
990.
N.Madad, L.Chebil, C.Sanchez, M.Ghoul. Rasayan J. Chem., 4, 189 (2011)
991.
A theoretical and experimental study on the behaviour of lignosulfonate-treated sandy silt
Chen Q., Indraratna B., Carter J., Rujikiatkamjorn C.
Computers and Geotechnics , 2014
992.
Characterization of expansive soils treated with lignosulfonate
Chavali R.V., Reshmarani B.
International Journal of Geo-Engineering , 2020
994.
Stabilisation of an erodible soil using a chemical admixture
Vinod J.S., Indraratna B., Mahamud M.A.
Proceedings of the Institution of Civil Engineers: Ground Improvement , 2010
995.
Slope Stability Studies of Excavated Slopes in Lateritic Formations
Shivashankar R., Thomas B.C., Krishnanunni K.T., Reddy D.V.
Lecture Notes in Civil Engineering , 2018
997.
Effective variables on production and structure of xanthan gum and its food applications: A review
Habibi H., Khosravi-Darani K.
Biocatalysis and Agricultural Biotechnology , 2017
998.
Xanthan gum-derived materials for applications in environment and eco-friendly materials: A review
Abu Elella M.H., Goda E.S., Gab-Allah M.A., Hong S.E., Pandit B., Lee S., Gamal H., Rehman A.U., Yoon K.R.
Journal of Environmental Chemical Engineering , 2021
1000.
Xanthan gum: production, recovery, and properties
Garcı́a-Ochoa F., Santos V.E., Casas J.A., Gómez E.
Biotechnology Advances , 2000
1001.
Effects of Xanthan gum biopolymer on soil strengthening
Chang I., Im J., Prasidhi A.K., Cho G.
Construction and Building Materials , 2015
1003.
Xanthan Gum Biopolymer as Soil-Stabilization Binder for Road Construction Using Local Soil in Sri Lanka
Lee S., Chung M., Park H.M., Song K., Chang I.
Journal of Materials in Civil Engineering , 2019
1004.
Review on biopolymer-based soil treatment (BPST) technology in geotechnical engineering practices
Chang I., Lee M., Tran A.T., Lee S., Kwon Y., Im J., Cho G.
Transportation Geotechnics , 2020
1006.
A novel study on using protein based biopolymers in soil strengthening
Fatehi H., Abtahi S.M., Hashemolhosseini H., Hejazi S.M.
Construction and Building Materials , 2018
1007.
Biopolymer Stabilization of Mine Tailings
Chen R., Zhang L., Budhu M.
Journal of Geotechnical and Geoenvironmental Engineering - ASCE , 2013
1008.
Seaweed biopolymers as additives for unfired clay bricks
Dove C.A., Bradley F.F., Patwardhan S.V.
Materials and Structures/Materiaux et Constructions , 2016
1009.
Improvement of Problematic Soils with Biopolymer—An Environmentally Friendly Soil Stabilizer
Latifi N., Horpibulsuk S., Meehan C.L., Abd Majid M.Z., Tahir M.M., Mohamad E.T.
Journal of Materials in Civil Engineering , 2016
1010.
T.H.K.S.M.Ham, I.Chang, D.H.Noh. J. Geotech. Geoenvironmental Eng., 144, 06018004 (2018)
1011.
Soil treatment using microbial biopolymers for anti-desertification purposes
1013.
A Review on the Importance of Microbial Biopolymers Such as Xanthan Gum to Improve Soil Properties
Mendonça A., Morais P.V., Pires A.C., Chung A.P., Oliveira P.V.
Applied Sciences (Switzerland) , 2020
1014.
Alginate: Properties and biomedical applications
Lee K.Y., Mooney D.J.
Progress in Polymer Science , 2012
1017.
Alginates
1019.
Soil Conditioners
Quastel J.H.
Annual Review of Plant Physiology , 1954
1020.
H.Fatehi, M.Bahmani, A.Noorzad. In Geo-Congress 2019: Soil Improvement. (Reston, VA: American Society of Civil Engineers, 2019). P. 157
1022.
Application of sodium alginate in induced biological soil crusts: enhancing the sand stabilization in the early stage
Peng C., Zheng J., Huang S., Li S., Li D., Cheng M., Liu Y.
Journal of Applied Phycology , 2017
1023.
10.1890/0012-9658(2003)084[1553:NCMBBS]2.0.CO;2
1026.
Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste
Pushpamalar V., Langford S.J., Ahmad M., Lim Y.Y.
Carbohydrate Polymers , 2006
1027.
Rheological properties of carboxymethyl cellulose (CMC) solutions
Benchabane A., Bekkour K.
Colloid and Polymer Science , 2008
1028.
Y.H.X.Pei, Q.Yang, Q.Xu, X.Zhang. Mech. Eng., 35, 2316 (2016)
1029.
C.Nnadi, F.Brave. J. Soil Sci. Environ. Manag., 2, 206 (2011)
1030.
Comparison of the Effects of Polyacrylamide and Sodium Carboxymethylcellulose Application on Soil Water Infiltration in Sandy Loam Soils
1031.
Slow-release NPK fertilizer encapsulated by carboxymethyl cellulose-based nanocomposite with the function of water retention in soil
Olad A., Zebhi H., Salari D., Mirmohseni A., Reyhani Tabar A.
Materials Science and Engineering C , 2018
1032.
Water retention, hydraulic conductivity of hydrophilic polymers in sandy soil as affected by temperature and water quality
1033.
S.C.Sutradhar, M.M.R.Khan, M.M.Rahman, N.C.Dafadar. J. Phys. Sci., 26, 23 (2015)
1034.
10.1002/(SICI)1096-9063(199912)55:12<1194::AID-PS79>3.0.CO;2-H
1037.
Chitosan in Biomedical Engineering: A Critical Review
Mohebbi S., Nezhad M.N., Zarrintaj P., Jafari S.H., Gholizadeh S.S., Saeb M.R., Mozafari M.
Current Stem Cell Research and Therapy , 2018
1038.
Environmental Applications of Chitosan and Its Derivatives
Yong S.K., Shrivastava M., Srivastava P., Kunhikrishnan A., Bolan N.
Reviews of Environmental Contamination and Toxicology , 2014
1039.
Biopolymer additives to reduce erosion-induced soil losses during irrigation
Orts W.J., Sojka R.E., Glenn G.M.
Industrial Crops and Products , 2000
1040.
10.1061/(ASCE)0899-1561(2007)19:1(58)
1041.
A.Alsanad. Ph.D. Theses. Arizona State University, USA, 2011
1042.
Biopolymer plugging effect: laboratory-pressurized pumping flow studies
Khachatoorian R., Petrisor I.G., Kwan C., Yen T.F.
Journal of Petroleum Science and Engineering , 2003
1044.
The potential use of chitosan as a biopolymer additive for enhanced mechanical properties and water resistance of earthen construction
Aguilar R., Nakamatsu J., Ramírez E., Elgegren M., Ayarza J., Kim S., Pando M.A., Ortega-San-Martin L.
Construction and Building Materials , 2016
1045.
Eco-friendly Improvement of Water Erosion Resistance of Unstable Soils with Biodegradable Polymers
Donayre A., Sanchez L.F., Kim S., Aguilar R., Nakamatsu J.
IOP Conference Series: Materials Science and Engineering , 2018
1046.
Biodegradability of chitin- and chitosan-containing films in soil environment
Makarios-Laham I., Lee T.
Journal of Polymers and the Environment , 1995
1048.
1049.
Antifungal Activity of Chitosan on Fusarium sulphureum in Relation to Dry Rot of Potato Tuber
1050.
Insecticidal and Fungicidal Activities of Chitosan and Oligo-chitosan
Zhang M., Tan T., Yuan H., Rui C.
Journal of Bioactive and Compatible Polymers , 2003
1051.
Optimization of the Film-Forming and Storage Conditions of Chitosan as an Antimicrobial Agent
Fernandez-Saiz P., Lagarón J.M., Ocio M.J.
Journal of Agricultural and Food Chemistry , 2009
1052.
Development of chitosan-PEG blended films using Trichoderma: Enhancement of antimicrobial activity and seed quality
Chandrika K.S., Prasad R.D., Godbole V.
International Journal of Biological Macromolecules , 2019
1053.
Polymeric stabilizers for protection of soil and ground against wind and water erosion
Zezin A.B., Mikheikin S.V., Rogacheva V.B., Zansokhova M.F., Sybachin A.V., Yaroslavov A.A.
Advances in Colloid and Interface Science , 2015
1054.
Polyelectrolyte Complexes in the Dispersed and Solid State I. (Ed. M.Muller). (Berlin, Heidelberg: Springer, 2014)
1055.
V.A.Kabanov, A.B.Zezin. Russ. Chem. Rev., 51, 883 (1982)
1056.
Polyelectrolytes in the solution of ecological problems
Kabanov V.A., Zezin A.B., Kasaikin V.A., Yaroslavov A.A., Topchiev D.A.
Russian Chemical Reviews , 1991
1057.
Interpolyelectrolyte complexes: advances and prospects of application
Izumrudov V.A., Mussabayeva B.K., Kassymova Z.S., Klivenko A.N., Orazzhanova L.K.
Russian Chemical Reviews , 2019
1058.
A Review: Overview of Novel Polyelectrolyte Complexes as Prospective Drug Bioavailability Enhancers
Siyawamwaya M., Choonara Y.E., Bijukumar D., Kumar P., Du Toit L.C., Pillay V.
International Journal of Polymeric Materials and Polymeric Biomaterials , 2015
1060.
Non-stoichiometric interpolyelectrolyte complexes: Promising candidates for protection of soils
Panova I.G., Sybachin A.V., Spiridonov V.V., Kydralieva K., Jorobekova S., Zezin A.B., Yaroslavov A.A.
Geoderma , 2017
1061.
Polyelectrolyte Complexes of Potassium Humates and Poly(dialyldimethylammonium chloride) for Fixing Sand Soil
Panova I.G., Khaidapova D.D., Ilyasov L.O., Kiushov A.A., Umarova A.B., Sybachin A.V., Yaroslavov A.A.
Polymer Science - Series B , 2019
1062.
Polyelectrolyte complexes based on natural macromolecules for chemical sand/soil stabilization
Panova I.G., Khaydapova D.D., Ilyasov L.O., Umarova A.B., Yaroslavov A.A.
Colloids and Surfaces A: Physicochemical and Engineering Aspects , 2020
1063.
Interpolyelectrolyte complexes as effective structure‐forming agents for Chernozem soil
Panova I.G., Demidov V.V., Shulga P.S., Ilyasov L.O., Butilkina M.А., Yaroslavov A.A.
Land Degradation and Development , 2020
1064.
New Lignin-Based Polymers for Ecological Rehabilitation
Shulga G., Betkers T., Brovkina J., Neiberte B., Verovkins A., Belous O., Ambrazaitene D., Žukauskaite A.
Molecular Crystals and Liquid Crystals , 2008
1065.
Wood processing by-products treated with the lignin-based conditioner as mulch for soil protection
SHULGA G., BETKERS T., VITOLINA S., NEIBERTE B., VEROVKINS A., ANNE O., AMBRAZAITIENE D., ZUKAUSKAITE A.
Journal of Environmental Engineering and Landscape Management , 2015
1066.
Preparation and Properties of Interpolymer Complexes Capable of Soil Structuring
Kassymova Z.S., Orazzhanova L.K., Klivenko A.N., Mussabayeva B.K., Aserzhanov D.K.
Russian Journal of Applied Chemistry , 2019
1069.
S.M.Cakic, I.S.Ristic, M.M.Cincovic, D.T.Stojiljkovic, C.J.Janos, C.J.Miroslav, J.V.Stamenkovic. Prog. Org. Coatings, 78, 357 (2015)
1070.
Salting-Out Waterborne Catiomeric Polyurethanes for Drugs Encapsulation and Delivery
Fernández-d'Arlas B., Eceiza A.
Macromolecular Chemistry and Physics , 2015
1072.
A high-efficiency denitrification bioreactor for the treatment of acrylonitrile wastewater using waterborne polyurethane immobilized activated sludge
Dong H., Wang W., Song Z., Dong H., Wang J., Sun S., Zhang Z., Ke M., Zhang Z., Wu W., Zhang G., Ma J.
Bioresource Technology , 2017
1073.
Microstructural and antibacterial properties of silver nanoparticle-decorated porous polyurethane surface for water purification
1074.
Karpov S.V., Dzhalmukhanova A.S., Chernyayev D.A., Lodygina V.P., Komratova V.V., Malkov G.V., Badamshina E.R.
2020
1075.
The investigation of triethylammonium carboxylates influence on the kinetics of urethane formation processing during waterborne polyurethane synthesis
Karpov S.V., Dzhalmukhanova A.S., Chernyayev D.A., Lodygina V.P., Firsova A.I., Badamshina E.R.
Polymers for Advanced Technologies , 2021
1076.
Kinetics of urethane formation from isophorone diisocyanate: The catalyst and solvent effects
Karpov S.V., Lodygina V.P., Komratova V.V., Dzhalmukhanova A.S., Malkov G.V., Badamshina E.R.
Kinetics and Catalysis , 2016
1078.
Eco-Friendly Castor Oil-Based Delivery System with Sustained Pesticide Release and Enhanced Retention
Zhang Y., Liu B., Huang K., Wang S., Quirino R.L., Zhang Z., Zhang C.
ACS applied materials & interfaces , 2020
1079.
Water-based non-isocyanate polyurethane-ureas (NIPUUs)
Bizet B., Grau É., Cramail H., Asua J.M.
Polymer Chemistry , 2020
1080.
Synthesis of self-healable waterborne isocyanate-free poly(hydroxyurethane)-based supramolecular networks by ionic interactions
Bossion A., Olazabal I., Aguirresarobe R.H., Marina S., Martín J., Irusta L., Taton D., Sardon H.
Polymer Chemistry , 2019
1082.
Synthesis and Study of Properties of Waterborne Polyurethanes Based on β-Cyclodextrin Partial Nitrate as Potential Systems for Delivery of Bioactive Compounds
1083.
Nitrification characteristics of nitrobacteria immobilized in waterborne Polyurethane in wastewater of corn-based ethanol fuel production
Dong Y., Zhang Z., Jin Y., Lu J., Cheng X., Li J., Deng Y., Feng Y., Chen D.
Journal of Environmental Sciences , 2012
1084.
Preparation and properties of lambda-cyhalothrin/polyurethane drug-loaded nanoemulsions
Qin H., Zhang H., Li L., Zhou X., Li J., Kan C.
RSC Advances , 2017
1085.
Preparation and Characterization of Controlled-Release Avermectin/Castor Oil-Based Polyurethane Nanoemulsions
Zhang H., Qin H., Li L., Zhou X., Wang W., Kan C.
Journal of Agricultural and Food Chemistry , 2017
1086.
Expanded Graphite-Polyurethane Foams for Water–Oil Filtration
Vásquez L., Campagnolo L., Athanassiou A., Fragouli D.
ACS applied materials & interfaces , 2019
1088.
Preparation of Waterborne Polyurethane Foam with Active Carbon and Its Adsorption for Phenol in Aqueous Solution
Mao N., Zhou L., Ye Z., Zheng W., Peng L., Li Y.
Journal of Environmental Engineering, ASCE , 2013
1089.
NH4+-N adsorption behavior of nitrifying sludge immobilized in waterborne polyurethane (WPU) pellets
Lü T., Yu D., Chen G., Wang X., Huang S., Liu C., Tang P.
Biochemical Engineering Journal , 2019
1092.
A cascade of a denitrification bioreactor and an aerobic biofilm reactor for heavy oil refinery wastewater treatment
Dong H., Jiang X., Sun S., Fang L., Wang W., Cui K., Yao T., Wang H., Zhang Z., Zhang Y., Zhang Z., Fu P.
RSC Advances , 2019
1096.
Recent Advances in Drinking Water Disinfection: Successes and Challenges
Ngwenya N., Ncube E.J., Parsons J.
Reviews of Environmental Contamination and Toxicology , 2012
1098.
Cellulose Nanomaterials in Water Treatment Technologies
Carpenter A.W., de Lannoy C., Wiesner M.R.
Environmental Science & Technology , 2015
1099.
Nanocellulose-Based Materials for Water Purification
Voisin H., Bergström L., Liu P., Mathew A.
Nanomaterials , 2017
1101.
Nanofluidic Carbon Nanotube Membranes
Bakajin O., Noy A., Fornasiero F., Grigoropoulos C.P., Holt J.K., In J.B., Kim S., Park H.G.
2014
1105.
Association of small aromatic molecules with PAMAM dendrimers
DeFever R.S., Sarupria S.
Physical Chemistry Chemical Physics , 2015
1106.
Removal of heavy metals and organic pollutants from water using dendritic polymers based adsorbents: A critical review
Sajid M., Nazal M.K., Ihsanullah, Baig N., Osman A.M.
Separation and Purification Technology , 2018
1107.
Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003
Alexander C., Andersson H.S., Andersson L.I., Ansell R.J., Kirsch N., Nicholls I.A., O'Mahony J., Whitcombe M.J.
Journal of Molecular Recognition , 2006
1108.
Molecular imprinting: perspectives and applications
Chen L., Wang X., Lu W., Wu X., Li J.
Chemical Society Reviews , 2016
1110.
Nanoscale Materials in Water Purification. (Eds S.Thomas, D.Pasquini, L.Shao-Yuan, D.A.Gopakumar). (Elsevier, 2019)
1111.
Sorbents for water purification based on conjugated polymers
Sapurina I.Y., Shishov M.A., Ivanova V.T.
Russian Chemical Reviews , 2020
1112.
Molecularly imprinted materials: synthesis, properties, applications
Lisichkin G.V., Krutyakov Y.A.
Russian Chemical Reviews , 2006
1113.
O.D.Gendrikson, A.V.Zherdev, B.B.Dzantiev. Usp. Biol. Chem., 46, 149 (2006)
1116.
Photoinitiation of methacrylate polymerization with an o-benzoquinone-amine system
Chesnokov S.A., Cherkasov V.K., Abakumov G.A., Mamysheva O.N., Zakharina M.Y., Shushunova N.Y., Chechet Y.V., Kuropatov V.A.
Polymer Science - Series B , 2014
1119.
From precision polymers to complex materials and systems
Lutz J., Lehn J., Meijer E.W., Matyjaszewski K.
Nature Reviews Materials , 2016
1121.
Reversible deactivation radical polymerization of polyfunctional monomers
Kurochkin S.A., Grachev V.P.
Polymer Science - Series C , 2015
1124.
Preparation of new dioxygen-active triphenylantimony(V) catecholate-containing porous polymer
Chesnokov S.A., Lenshina N.A., Arsenyev M.V., Kovylin R.S., Baten'kin M.A., Poddel'sky A.I., Abakumov G.A.
Applied Organometallic Chemistry , 2016
1125.
Mesoporous Networks of N-Vinylpyrrolidone with (di)Methacrylates as Precursors of Ecological Molecular Imprinted Polymers
Kurmaz S.V., Fadeeva N.V., Gorshkova A.I., Kurochkin S.A., Knerelman E.I., Davydova G.I., Torbov V.I., Dremova N.N., Konev D.V., Kurmaz V.A., Ignatiev V.M., Emelyanova N.S.
Materials , 2021
1128.
The synthesis of molecular recognition polymer particles via miniemulsion polymerization
Wang Z., Qiu T., Guo L., Ye J., He L., Li X.
Reactive and Functional Polymers , 2018
1132.
Highly effective removal of 2,4-dinitrophenolic from surface water and wastewater samples using hydrophilic molecularly imprinted polymers
1134.
Nanogels and Microgels: From Model Colloids to Applications, Recent Developments, and Future Trends
Karg M., Pich A., Hellweg T., Hoare T., Lyon L.A., Crassous J.J., Suzuki D., Gumerov R.A., Schneider S., Potemkin I.I., Richtering W.
Langmuir , 2019
1136.
Anakhov Mikhail Vladimirovich, Gumerov Rustam Anrikovich, Potemkin Igor Ivanovich
Mendeleev Communications , 2020
1137.
Microgels as efficient adsorbents for the removal of pollutants from aqueous medium
Naseem K., Hussain Farooqi Z., Zia Ur Rehman M., Atiq Ur Rehman M., Ghufran M.
Reviews in Chemical Engineering , 2018
1140.
Poly (N-Isopropylacrylamide) Microgels for Organic Dye Removal from Water
Parasuraman D., Serpe M.J.
ACS applied materials & interfaces , 2011
1142.
Uptake and controlled release of a dye from thermo-sensitive polymer P(NIPAM-co-Vim)
Śliwa T., Jarzębski M., Andrzejewska E., Szafran M., Gapiński J.
Reactive and Functional Polymers , 2017
1143.
Poly(N-isopropylmethacrylamide-acrylic acid) microgels as adsorbent for removal of toxic dyes from aqueous medium
Naseem K., Farooqi Z.H., Begum R., Ghufran M., Rehman M.Z., Najeeb J., Irfan A., Al-Sehemi A.G.
Journal of Molecular Liquids , 2018
1146.
Improved Smart Microgel Carriers for Catalytic Silver Nanoparticles
Brändel T., Sabadasch V., Hannappel Y., Hellweg T.
ACS Omega , 2019
1147.
Core–shell microgels as thermoresponsive carriers for catalytic palladium nanoparticles
Sabadasch V., Wiehemeier L., Kottke T., Hellweg T.
Soft Matter , 2020
1148.
Amphiphilic polymer-Ag composite microgels with tunable catalytic activity and selectivity
1150.
Fast removal of high quantities of toxic arsenate via cationic p(APTMACl) microgels
Rehman S.U., Siddiq M., Al-Lohedan H., Aktas N., Sahiner M., Demirci S., Sahiner N.
Journal of Environmental Management , 2016
1152.
A novel biodegradable β-cyclodextrin-based hydrogel for the removal of heavy metal ions
1158.
Adsorption of Lead Ions onto N -Isopropylacrylamide and Acrylic Acid Copolymer Microgels
Morris G.E., Vincent B., Snowden M.J.
Journal of Colloid and Interface Science , 1997
1161.
Removal of natural organic matter by cationic hydrogel with magnetic properties
Rao P., Lo I.M., Yin K., Tang S.C.
Journal of Environmental Management , 2011
1163.
Petrogel: New Hydrocarbon (Oil) Absorbent Based on Polyolefin Polymers
1164.
Synthesis and application of porous oil-sorbent microspheres: Characterization, retention capacity and sorption kinetics
Abirami A.L., Kumar P.S., Prakash D.G., Ravirajan A., Umasankaran A., Narayanan P., Ravishankar K., Kumar C.S., Nagaraju S., Reddy K.P.
Separation and Purification Technology , 2020
1165.
Tuneable Catalytic Properties of Hybrid Microgels Containing Gold Nanoparticles
Pich A., Karak A., Lu Y., Ghosh A.K., Adler H.P.
Journal of Nanoscience and Nanotechnology , 2006
1166.
Selenium‐Modified Microgels as Bio‐Inspired Oxidation Catalysts
Tan K.H., Xu W., Stefka S., Demco D.E., Kharandiuk T., Ivasiv V., Nebesnyi R., Petrovskii V.S., Potemkin I.I., Pich A.
Angewandte Chemie - International Edition , 2019
1167.
Enhanced catalyst performance through compartmentalization exemplified by colloidal l-proline modified microgel catalysts
Kleinschmidt D., Fernandes M.S., Mork M., Meyer A.A., Krischel J., Anakhov M.V., Gumerov R.A., Potemkin I.I., Rueping M., Pich A.
Journal of Colloid and Interface Science , 2020
1168.
Thermosensitive core-shell microgel as a “nanoreactor” for catalytic active metal nanoparticles
Lu Y., Proch S., Schrinner M., Drechsler M., Kempe R., Ballauff M.
Journal of Materials Chemistry A , 2009
1169.
Synthesis of sensitive hybrid polymer microgels for catalytic reduction of organic pollutants
Shah L.A., Haleem A., Sayed M., Siddiq M.
Journal of Environmental Chemical Engineering , 2016
1170.
From Batch to Continuous Precipitation Polymerization of Thermoresponsive Microgels
Wolff H.J., Kather M., Breisig H., Richtering W., Pich A., Wessling M.
ACS applied materials & interfaces , 2018
1171.
Soft temperature-responsive microgels of complex shape in stop-flow lithography
Wolff H.J., Linkhorst J., Göttlich T., Savinsky J., Krüger A.J., de Laporte L., Wessling M.
Lab on a Chip , 2020
1172.
Amphiphilic PVCL/TBCHA microgels: From synthesis to characterization in a highly selective solvent
Gumerov R.A., Gau E., Xu W., Melle A., Filippov S.A., Sorokina A.S., Wolter N.A., Pich A., Potemkin I.I.
Journal of Colloid and Interface Science , 2020
1173.
N.A.Plate, A.E.Vasil'ev. Fiziologicheski Aktivnye Polimery. (Physiologically Active Polymers). (Moscow: Khimiya, 1986)
1174.
G.Ringsdorf, B.Shmidt. Zh. Vsesoyus. Khim. O-va im. D.I.Mendeleeva, 32, 481 (1987)
1175.
E.F.Panarin, N.A.Lavrov, M.S.Solovskii, L.I.Shal'nova. Polimery -- Nositeli Biologicheskikh Aktivnykh Veshchestv. (Polymers -- Carriers of Biologically Active Substances). (Saint Petersburg: TsOP 'Professiya', 2014)
1176.
G.E.Afinogenov, E.F.Panarin. Antimikrobnye Polimery. (Antimicrobial Polymers). (Saint Petersburg: Gippokrat, 1993)
1177.
Antimicrobial cationic polymers: from structural design to functional control
Yang Y., Cai Z., Huang Z., Tang X., Zhang X.
Polymer Journal , 2017
1179.
M.S.Solovskii, E.F.Panarin. Sintez i Modifikatsiya Polimerov. (Synthesis and Modification of Polymers). (Moscow: Khimiya, 2003)
1180.
DNA Complexes with Polycations for the Delivery of Genetic Material into Cells
1181.
Exploring polyethylenimine-mediated DNA transfection and the proton sponge hypothesis
Akinc A., Thomas M., Klibanov A.M., Langer R.
Journal of Gene Medicine , 2005
1182.
DNA–polycation complexes Effect of polycation structure on physico-chemical and biological properties
Slita A.V., Kasyanenko N.A., Nazarova O.V., Gavrilova I.I., Eropkina E.M., Sirotkin A.K., Smirnova T.D., Kiselev O.I., Panarin E.F.
Journal of Biotechnology , 2007
1183.
Physicochemical and biological evaluation of cationic polymethacrylates as vectors for gene delivery
Dubruel P., Christiaens B., Vanloo B., Bracke K., Rosseneu M., Vandekerckhove J., Schacht E.
European Journal of Pharmaceutical Sciences , 2003
1184.
Polymeric materials with antimicrobial activity
Muñoz-Bonilla A., Fernández-García M.
Progress in Polymer Science , 2012
1186.
A.R.Danilov, Yu.V.vasil'ev. Novye Biologicheski Aktivnye Polimery i Immobilizovannye imi Steroidy. (Biologically Active Polymers and Steroids Mobilized by Them). (Leningrad: LPMI, 1988)
1187.
Synthesis, Immunomodulating and Antitumor Activities of Copolymers of Dialkylaminoethyl Methacrylates and Vinylsaccharides
Nazarova O.V., Potapenkova L.S., Stukov A.N., Zolotova Y.I., Zhuravskaya O.N., Nekrasova T.N., Panarin E.F.
Pharmaceutical Chemistry Journal , 2017
1188.
Synthesis and Antibacterial and Antiviral Properties of Silver Nanocomposites Based on Water-Soluble 2-Dialkylaminoethyl Methacrylate Copolymers
Nazarova O.V., Anan’eva E.P., Zarubaev V.V., Sinegubova E.O., Zolotova Y.I., Bezrukova M.A., Panarin E.F.
Pharmaceutical Chemistry Journal , 2020
1189.
Labs pazina
Silenieks J., Vilks E.
Books Abroad , 1974
1191.
V.D.Pautov, T.N.Anan'eva, I.I.Gavrilova. Zh. Prikl. Khim., 80, 2054 (2007)
1192.
W.Regelson. In Adv. Chemotherapy. (Eds A.Goldin, F.Schnitzer, R.J.Hawking). (New York: Academic Press, 1968). P. 303
1193.
N.A.Zeitlenok, L.M.Vil'ner, V.A.Trukhmanova, V.A.Kropachev, I.M.Rodin, T.M.Markelova, M.M.Gol'dfarb. Voprosy Virusuologii, 401 (1968)
1194.
V.N.Tarasov, V.A.Kropachev, L.B.Trukhmanova. Zh. Mikrobiol. Epidemiol. Immunobiol, 89 (1970)
1195.
N.A.Zaitlenok. Obrazovanie i Deistvie Interferona (Formation and Action of Interferon). (Riga: Znanie, 1972)
1196.
T.S.Abdukhodzhaev, V.A.Kropachev, L.B.Trukhmanova, L.M.Vil'ner. Fiziologicheski Aktivnye Polymery. (Physiologically Active Polymer Substances). (Tashkent: Izd. Tashk. Univ., 1976)
1197.
D.I.Ershov, I.A.Vinograd, M.M.Kozlovskii, O.L.Pendarskii, L.L.Stotskaya. In Polimery Meditsinskogo Naznacheniya. (Medical Grade Polymers). (Moscow: INKhS Akad. Nauk SSSR, 1988). P. 11
1198.
E.G.Deeva. Candidate Thesis in Medical Sciences. (Saint Petersburg: Smorodintsev Research Institute of Influenza, 2000)
1199.
Adsorption of viruses to charge-modified silica
Zerda K.S., Gerba C.P., Hou K.C., Goyal S.M.
Applied and Environmental Microbiology , 1985
1200.
Synthetic Polymers in Studies on the Adsorption of Viral Particles
Sirotkin A.K., Sukhinin V.P., Nazarova O.V., Gavrilova I.I., Panarin E.F.
Doklady Biochemistry and Biophysics , 2003
1201.
Cell surface receptors for herpes simplex virus are heparan sulfate proteoglycans.
Shieh M.T., WuDunn D., Montgomery R.I., Esko J.D., Spear P.G.
Journal of Cell Biology , 1992
1202.
Sulfonic acid polymers as a new class of human immunodeficiency virus inhibitors.
1203.
P.G.Spear. In Viral Fusion Mechanisms. (Ed. J.Bentz). (CRC Press, 1992). P. 201
1205.
E.F.Panarin, V.N.Ushakova. In Polimery Meditsinskogo Naznacheniya. (Medical Grade Polymers). (Moscow: INKhS Akad. Nauk SSSR, 1988). P. 66
1206.
Patent RU 2635558 (2017)
1207.
Luminescent polyelectrolytes with antiviral activity
Panarin E.F., Fischer A.I., Nesterova N.A., Shtro A.A., Dobrodumov A.V., Gavrilova I.I., Manakhov V.A., Nekrasova T.N.
Russian Chemical Bulletin , 2022
1208.
Lanthanide light for biology and medical diagnosis
1209.
Photoluminescence of lanthanide aromatic carboxylates
Utochnikova V.V., Kuzmina N.P.
Russian Journal of Coordination Chemistry/Koordinatsionnaya Khimiya , 2016
1210.
Bochkarev M.N., Pushkarev A.P.
Organic Photonics and Photovoltaics , 2016
1212.
Complexation behavior of poly(acrylic acid) and lanthanide ions
Qi X., Wang Z., Ma S., Wu L., Yang S., Xu J.
Polymer , 2014
1214.
Phosphorescent heavy-metal complexes for bioimaging
Zhao Q., Huang C., Li F.
Chemical Society Reviews , 2011
1215.
Water-Soluble Metal—Polymer Gallium Complexes Based on Imino Derivatives of an N-Vinylpyrrolidone/N-Vinylamine Copolymer
Ivanov A.G., Gavrilova I.I., Krasikov V.D., Panarin E.F.
Russian Journal of Applied Chemistry , 2019
1216.
Water-Soluble Polymeric Heteroligand Europium Complexes
Nekrasova T.N., Nesterova N.A., Gavrilova I.I., Pautov V.D., Panarin E.F.
Russian Journal of Applied Chemistry , 2019
1217.
Water-Soluble Luminescent Lanthanide Complexes Based on 2-Methacryloyloxyethyleniminodiacetic Acid Copolymers
Nekrasova T.N., Solovskii M.V., Borisenko M.S., Fisher A.I., Panarin E.F.
Doklady Chemistry , 2021
1218.
Water-Soluble Polymer Ligands for Binding of Terbium Ions
Nekrasova T.N., Zhuravskaya O.N., Bezrukova M.A., Dobrodumov A.V., Panarin E.F.
Doklady Chemistry , 2020
1219.
Gadolinium(III) Chelates as MRI Contrast Agents:  Structure, Dynamics, and Applications
Caravan P., Ellison J.J., McMurry T.J., Lauffer R.B.
Chemical Reviews , 1999
1220.
Preparation and characterization of paramagnetic polychelates and their protein conjugates
Sieving P.F., Watson A.D., Rocklage S.M.
Bioconjugate Chemistry , 1990
1221.
Noninvasive Visualization of in Vivo Drug Delivery of Poly(l-glutamic acid) Using Contrast-Enhanced MRI
Ye F., Ke T., Jeong E., Wang X., Sun Y., Johnson M., Lu Z.
Molecular Pharmaceutics , 2006
1222.
PEG-g-poly(GdDTPA-co-l-cystine):  A Biodegradable Macromolecular Blood Pool Contrast Agent for MR Imaging
Mohs A.M., Wang X., Goodrich K.C., Zong Y., Parker D.L., Lu Z.
Bioconjugate Chemistry , 2004
1224.
The Arthrotropism of Macromolecules in Adjuvant-Induced Arthritis Rat Model: A Preliminary Study
Wang D., Miller S.C., Sima M., Parker D., Buswell H., Goodrich K.C., Kopečková P., Kopeček J.
Pharmaceutical Research , 2004
1225.
Synthesis and Characterization of HE-24.8:  A Polymeric Contrast Agent for Magnetic Resonance Angiography
Kiessling F., Heilmann M., Lammers T., Ulbrich K., Subr V., Peschke P., Waengler B., Mier W., Schrenk H., Bock M., Schad L., Semmler W.
Bioconjugate Chemistry , 2005
1226.
Contrast agents for magnetic resonance imaging based on dendronized N-vinylpyrrolidone polymers
Burov S.V., Polyanichko K.V., Chelushkin P.S., Dorosh M.Y., Gavrilova I.I., Dobrodumov A.V., Pokhvoshchev Y.V., Krasikov V.D., Panarin E.F.
Doklady Chemistry , 2016
1227.
Macromolecular MRI Contrast Agents with Small Dendrimers:  Pharmacokinetic Differences between Sizes and Cores
Kobayashi H., Kawamoto S., Jo S., Bryant H.L., Brechbiel M.W., Star R.A.
Bioconjugate Chemistry , 2003
1228.
Gadolinium-labeled peptide dendrimers with controlled structures as potential magnetic resonance imaging contrast agents
Luo K., Liu G., She W., Wang Q., Wang G., He B., Ai H., Gong Q., Song B., Gu Z.
Biomaterials , 2011
1229.
Cascade Polymeric MRI Contrast Media Derived from Poly(ethylene glycol) Cores:  Initial Syntheses and Characterizations
Fu Y., Raatschen H., Nitecki D.E., Wendland M.F., Novikov V., Fournier L.S., Cyran C., Rogut V., Shames D.M., Brasch R.C.
Biomacromolecules , 2007
1230.
Physicochemical Characterization of P760, a New Macromolecular Contrast Agent with High Relaxivity
Vander Elst L., Port M., Raynal I., Simonot C., Muller R.
European Journal of Inorganic Chemistry , 2003
1231.
Glycoconjugates of gadolinium complexes for MRI applications
Fulton D.A., Elemento E.M., Aime S., Chaabane L., Botta M., Parker D.
Chemical Communications , 2006
1232.
Degradable Hyperbranched Poly(bis(undecenyloxy)methylsilane)s
Muzafarov A.M., Golly M., Moeller M.
Macromolecules , 1995